SamyGO - User contributions [en]

Activating PVR on D5500

2011-12-13T19:08:25Z

B1czu: /* Working models */

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500
*UE37D5700
*UE40D5700

If You have tested on other models, please update this wiki or let me know.

== Needed stuff ==
*TV and PC connected to the same network (I've tested on LAN) [[File:smarthub_menu_d5500.jpg|200px|thumb|Photo of Smart-Hub on D5500 with PVR enabled]]
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download [http://www.rainerullrich.de/samsung/ ruSamsungTVCommunicator]. [[File:Service_menu_d5500.jpg|200px|thumb|Photo of standard service menu in D5500]]
*Turn on TV in normal mode, and alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect. [[File:hidden_Service_sub-menu_d5500.jpg|200px|thumb|Photo of hidden opts in service sub-menu in D5500]]
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing ==
*Start TV in normal mode. [[File:source_menu_d5500.jpg|200px|thumb|Photo of source menu in D5500 with PVR enabled]]
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

--[[User:B1czu|b1czu]] 21:13, 22 November 2011 (UTC)

The D Series Wiki

2011-11-22T21:26:56Z

B1czu:

= SamyGO D Series Wiki Page Main =
[[File:d_wiki.png|140px|right]]

On this page, you will find hacks related for only D series TVs.
* [[D6x00 TVs FULL HD 3D Defect]]
* [[UnBricking TV by EEPROM Reset]]
* [[Ex-Link Cable for C/D Series]]
* [[Compatibility Table for D series TVs]]
* [[Activating PVR on D5500]]/D5700

Applications compatible with D series TVs:
* [[Desktop applications list]]
* [[Android applications list]]
* [[iOS applications list]]

* [[Rooting D series arm cpu models]] (D6xxx and above)

Activating PVR on D5500

2011-11-22T21:13:10Z

B1czu:

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500
*UE37D5700

If You have tested on other models, please update this wiki or let me know.

== Needed stuff ==
*TV and PC connected to the same network (I've tested on LAN) [[File:smarthub_menu_d5500.jpg|200px|thumb|Photo of Smart-Hub on D5500 with PVR enabled]]
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download [http://www.rainerullrich.de/samsung/ ruSamsungTVCommunicator]. [[File:Service_menu_d5500.jpg|200px|thumb|Photo of standard service menu in D5500]]
*Turn on TV in normal mode, and alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect. [[File:hidden_Service_sub-menu_d5500.jpg|200px|thumb|Photo of hidden opts in service sub-menu in D5500]]
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing ==
*Start TV in normal mode. [[File:source_menu_d5500.jpg|200px|thumb|Photo of source menu in D5500 with PVR enabled]]
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

--[[User:B1czu|b1czu]] 21:13, 22 November 2011 (UTC)

Activating PVR on D5500

2011-11-22T19:42:18Z

B1czu:

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500

If You have tested on other models, please update this wiki or let me know.

== Needed stuff ==
*TV and PC connected to the same network (I've tested on LAN) [[File:smarthub_menu_d5500.jpg|200px|thumb|Photo of Smart-Hub on D5500 with PVR enabled]]
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download [http://www.rainerullrich.de/samsung/ ruSamsungTVCommunicator]. [[File:Service_menu_d5500.jpg|200px|thumb|Photo of standard service menu in D5500]]
*Turn on TV in normal mode, and alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect. [[File:hidden_Service_sub-menu_d5500.jpg|200px|thumb|Photo of hidden opts in service sub-menu in D5500]]
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing ==
*Start TV in normal mode. [[File:source_menu_d5500.jpg|200px|thumb|Photo of source menu in D5500 with PVR enabled]]
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

--[[User:B1czu|b1czu]] 19:42, 22 November 2011 (UTC)

Activating PVR on D5500

2011-11-22T19:40:42Z

B1czu:

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500

If You have tested on other models, please update this wiki or let me know.

== Needed stuff ==
*TV and PC connected to the same network (I've tested on LAN) [[File:smarthub_menu_d5500.jpg|200px|thumb|Photo of Smart-Hub on D5500 with PVR enabled]]
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download ruSamsungTVCommunicator [http://www.rainerullrich.de/samsung/ FROM HERE]. [[File:Service_menu_d5500.jpg|200px|thumb|Photo of standard service menu in D5500]]
*Turn on TV in normal mode, and next alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect. [[File:hidden_Service_sub-menu_d5500.jpg|200px|thumb|Photo of hidden opts in service sub-menu in D5500]]
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing ==
*Start TV in normal mode. [[File:source_menu_d5500.jpg|200px|thumb|Photo of source menu in D5500 with PVR enabled]]
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

--[[User:B1czu|b1czu]] 19:40, 22 November 2011 (UTC)

Activating PVR on D5500

2011-11-22T19:40:24Z

B1czu:

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500

If You have tested on other models, please update this wiki or let me know.

== Needed stuff ==
*TV and PC connected to the same network (I've tested on LAN) [[File:smarthub_menu_d5500.jpg|200px|thumb|Photo of Smart-Hub on D5500 with PVR enabled]]
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download ruSamsungTVCommunicator [http://www.rainerullrich.de/samsung/ FROM HERE]. [[File:Service_menu_d5500.jpg|200px|thumb|Photo of standard service menu in D5500]]
*Turn on TV in normal mode, and next alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect. [[File:hidden_Service_sub-menu_d5500.jpg|200px|thumb|Photo of hidden opts in service sub-menu in D5500]]
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing ==
*Start TV in normal mode. [[File:source_menu_d5500.jpg|200px|thumb|Photo of source menu in D5500 with PVR enabled]]
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

Activating PVR on D5500

2011-11-22T19:35:07Z

B1czu:

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500

If You have tested on other models, please update this wiki or let me know.

== Needed stuff == [[File:smarthub_menu_d5500.jpg|200px|thumb|Photo of Smart-Hub on D5500 with PVR enabled]]
*TV and PC connected to the same network (I've tested on LAN)
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download ruSamsungTVCommunicator [http://www.rainerullrich.de/samsung/ FROM HERE]. [[File:Service_menu_d5500.jpg|200px|thumb|Photo of standard service menu in D5500]]
*Turn on TV in normal mode, and next alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect. [[File:hidden_Service_sub-menu_d5500.jpg|200px|thumb|Photo of hidden opts in service sub-menu in D5500]]
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing == [[File:source_menu_d5500.jpg|200px|thumb|Photo of source menu in D5500 with PVR enabled]]
*Start TV in normal mode.
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

File:Source menu d5500.jpg

2011-11-22T19:34:31Z

B1czu: Photo of source select menu on d5500 with PVR activated.

Photo of source select menu on d5500 with PVR activated.

File:Smarthub menu d5500.jpg

2011-11-22T19:33:27Z

B1czu: Photo of smarthub on d5500 with pvr enabled

Photo of smarthub on d5500 with pvr enabled

Activating PVR on D5500

2011-11-22T19:32:48Z

B1czu:

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500

If You have tested on other models, please update this wiki or let me know.

== Needed stuff == [[File:smarthub_menu_d5500.jpg|200px|thumb|Photo of Smart-Hub on D5500 with PVR enabled]]
*TV and PC connected to the same network (I've tested on LAN)
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download ruSamsungTVCommunicator [http://www.rainerullrich.de/samsung/ FROM HERE]. [[File:Service_menu_D5500.jpg|200px|thumb|Photo of standard service menu in d5500]]
*Turn on TV in normal mode, and next alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect. [[File:hidden_Service_sub-menu_d5500.jpg|200px|thumb|Photo of hidden opts in service sub-menu in D5500]]
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing == [[File:source_menu_d5500.jpg|200px|thumb|Photo of source menu in D5500 with PVR enabled]]
*Start TV in normal mode.
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

File:Hidden Service sub-menu d5500.jpg

2011-11-22T19:26:54Z

B1czu: Photo of available options in D5500's Service Menu->Sub-options

Photo of available options in D5500's Service Menu->Sub-options

File:Service menu d5500.jpg

2011-11-22T19:13:56Z

B1czu: Photo of standard d5500 service menu

Photo of standard d5500 service menu

The D Series Wiki

2011-11-22T19:04:18Z

B1czu:

= SamyGO D Series Wiki Page Main =
[[File:d_wiki.png|140px|right]]

On this page, you will find hacks related for only D series TVs.
* [[D6x00 TVs FULL HD 3D Defect]]
* [[UnBricking TV by EEPROM Reset]]
* [[Ex-Link Cable for C/D Series]]
* [[Compatibility Table for D series TVs]]
* [[Activating PVR on D5500]]

Applications compatible with D series TVs:
* [[Desktop applications list]]
* [[Android applications list]]
* [[iOS applications list]]

* [[Rooting D series arm cpu models]] (D6xxx and above)

Activating PVR on D5500

2011-11-22T19:03:42Z

B1czu:

This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and Digital Video Recorder (TV is capable to record only from DVB-T and DVB-C tuner). This is very simple operation.

== Working models ==
As now it is fully confirmed to be working on:
*UE46D5500

If You have tested on other models, please update this wiki or let me know.

== Needed stuff ==
*TV and PC connected to the same network (I've tested on LAN)
*PC tool called ruSamsungTVCommunicator
*Working Remote Controller :)

== Step 1: Download ruSamsungTVCommunicator ==
*Download ruSamsungTVCommunicator [http://www.rainerullrich.de/samsung/ FROM HERE].
*Turn on TV in normal mode, and next alow remote controlling via network in your TV's settings.
*Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.
*On TV accept ruSamsungTVCommunicator as network remote controller (this step is very important).
*Close ruSamsungTVCommunicator on your PC and turn off your TV.

== Step 2: Turn on TV in Service Mode ==
*Turn on TV in service mode by pressing INFO MENU MUTE POWER buttons in sequence.
*Wait a while as TV boot up and show Service Menu on screen.
*Run ruSamsungTVCommunicator on your PC, and wait a while to connect.
*In ruSamsungTVCommunicator click Factory (service menu dissapears on TV).
*In ruSamsungTVCommunicator click 3Speed (service menu appears again, with hidden options visible).

== Step 3: Enabling PVR ==
* From Service Menu select Control, than Sub-option
* Find PVR and change it to ON
* Save settings by pressing POWER on remote controller (TV turns off)

== Step 4: Testing ==
*Start TV in normal mode.
*Connect fast HDD to USB port
*On any DTV channel press REC button on remote, TV will ask about disk etc.
*DISK WILL BE FORMATTED! (You can choose which partition to format if you have more than 1)
*If TV end disk performance tests with success you can use PVR and Timeshift

Activating PVR on D5500

2011-11-22T18:38:45Z

B1czu: Created page with "This page describes how to activate PVR on Samsung D5500. Witch PVR you can use Timeshift function (pause the live program, go back in a while and watch it from that moment), and..."