SamyGO - User contributions [en]

Injectso patches

2019-01-13T08:44:23Z

Juuso: SPMdecrypt for H series -> green +

{| class="wikitable" style="color:black;" cellpadding="10"
|+ style="caption-side:top; text-align: center; color:#404040; font-size: 126%"|'''exeDSP/exeTV PATCHES COMPATIBILITY TABLE''' 
!
! colspan="2" style="text-align: center; width: 20%;" | C series
! colspan="2" style="text-align: center; width: 20%;" | D series
! colspan="2" style="text-align: center; width: 20%;" | E series
! colspan="2" style="text-align: center; width: 20%;" | F series
! colspan="2" style="text-align: center; width: 20%;" | H series
|- style="text-align: center; border-style: solid; border-width: 1px 1px 2px 1px"
!
! style="text-align: center;" | arm
! style="text-align: center;" | mips
! style="text-align: center;" | arm (6/7/8)
! style="text-align: center;" | mips (5)
! style="text-align: center;" | 5/ 6
! style="text-align: center;" | 7/8
! style="text-align: center;" | 5/6
! style="text-align: center;" | 7/8
! style="text-align: center;" |

|-
| style="text-align: center; font-weight: bold;" | ChannInfo patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Seek Movie Player patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Seek PVR Player patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | TimeShift Player Seek patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Movie Delete patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Subtitle Font Size and Color patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Sleep Timer Patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Menu Button Exit Fix
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | MPEGts patch
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | RCremap
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | SamyGOrc
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | STFU mod
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | AnalFix
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | SPMdecrypt
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | PVRdumpkeys
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | libExLink
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | ZoelPVR
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | InfoBarNumPatch
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Browser Fix
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | Dump Recording Titles
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | Recording Title Patch
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | LogChannel
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | HDMI audio passthrough
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | AirToSat
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | FakeEDID
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | SpdifMode
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | GameMode
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | ToolsMenu
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | Sound Feedback Volume
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | RCremap with CMD support
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | Game Enable patch
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | ChanList
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | SoftPowerOff
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | LockTV
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | Alert
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | RepeatPVR
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | CMDonPVR
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
|-
| style="text-align: center; font-weight: bold;" | NoDRM patch
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
|- colspan="11"
|
|-
| style="text-align: center; font-weight: bold;" | PVRAnyDev
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#ffffcc;" | -
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|-
| style="text-align: center; font-weight: bold;" | PVRtoTS
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center;" | {{red | N/A}}
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center; background-color:#B4EEB4;" | +
| style="text-align: center;" | {{red | N/A}}
|}
'''Legend:''' 
'''*''': Available only for users in '''[http://forum.samygo.tv/viewtopic.php?f=16&t=8155 Donor`s group]'''. 
'''{{red|N/A}}''': not available. 
'''-''': patch not required for this model.

{| class="wikitable" style="color:black;" cellpadding="20"
|+ style="caption-side:top; text-align: center; color:#404040; font-size: 126%"|'''Description of available patches/apps''' 
! style="text-align: center; font-weight: bold; width: 30%;" | Patch
! style="text-align: center; font-weight: bold;" | Description
|- style="text-align: center; border-style: solid; border-width: 2px 0 0 0"
| style="text-align: center; font-weight: bold;" | ChannInfo patch
| After changing TV channel shows for a while extended information about the current program (for digital TV channels from the EPG guide)
|-
| style="text-align: center; font-weight: bold;" | Seek Movie Player patch
| It allows settings time values for both KEY_LEFT/KEY_RIGHT and also adds support for KEY_UP/KEY_DOWN. It works all the time and allows setting seek values multiple times without the need to restart TV
|-
| style="text-align: center; font-weight: bold;" | Seek PVR Player patch
| It allows settings time values for both KEY_LEFT/KEY_RIGHT and also adds support for KEY_UP/KEY_DOWN
|-
| style="text-align: center; font-weight: bold;" | TimeShift Player Seek patch
| It allows settings time values for both KEY_LEFT/KEY_RIGHT and also adds support for KEY_UP/KEY_DOWN
|-
| style="text-align: center; font-weight: bold;" | Movie Delete patch
| Changes the File Info or Device Info to ''File Delete''
|-
| style="text-align: center; font-weight: bold;" | Subtitle Font Size and Color patch
| Increase the font size in subtitles and change them color
|-
| style="text-align: center; font-weight: bold;" | Sleep Timer Patch
| Custom values for sleep timer
|-
| style="text-align: center; font-weight: bold;" | Menu Button Exit Fix
| Exit menu with one press. Fix for C series only.
|-
| style="text-align: center; font-weight: bold;" | MPEGts patch
| Enable playback of *ts files
|-
| style="text-align: center; font-weight: bold;" | RCremap
| With this tool you can re-define keys of your remote control
|-
| style="text-align: center; font-weight: bold;" | SamyGOrc
| Send rc codes right from command line
|-
| style="text-align: center; font-weight: bold;" | STFU mod
| With this mod you can set custom timers for various infobanners (ChannelInfo, Record, Timeshift, MediaPlayer mode)
|-
| style="text-align: center; font-weight: bold;" | AnalFix
| this .so patches that installation security check when trying to install user widgets that use functions/features user widgets are not allowed to use
|
|-
| style="text-align: center; font-weight: bold;" | SPMdecrypt
| Decrypts encrypted widget files
|
|-
| style="text-align: center; font-weight: bold;" | PVRdumpkeys
| No comments :)
|
|-
| style="text-align: center; font-weight: bold;" | libExLink
| Outputs Exlink log to a given path, without the need to use an Exlink cable.
|
|-
| style="text-align: center; font-weight: bold;" | ZoelPVR
| Unlocks TV's built-in functionality to automatically add some time before and after recording when scheduling from EPG.
|
|-
| style="text-align: center; font-weight: bold;" | InfoBarNumPatch
| changes the number of lines for labels that are displayed in Contents and PVR Browser on the right. Be default the maximum is two lines so if for instance the title of the movie is longer it will be shortened with "...". With this patch you get up to 4 lines
|
|-
| style="text-align: center; font-weight: bold;" | Browser Fix
| Binds media browser tools menu to KEY_CHLIST and allows customization of it (full tools menu, disable "all" category, remove edit mode)
|
|-
| style="text-align: center; font-weight: bold;" | Dump Recording Titles
| Dumps info from recording device and outputs whole list of recording titles (and channel names) to logfile
|
|-
| style="text-align: center; font-weight: bold;" | Recording Title Patch
| This patch adds date suffix to recordings having no title or a predefined title. It also allows to offset EPG for recordings to have the right title, even if launched some time before (in case of manual scheduling, for example).
|
|-
| style="text-align: center; font-weight: bold;" | LogChannel
| Extracts and logs some infos about current TV state (source, channel, program, volume, resolution).
|
|-
| style="text-align: center; font-weight: bold;" | HDMI audio passthrough
| Patch unlocks TV's ability to passthrough 5.1 audio from HDMI to SPDIF (optical).
|
|-
| style="text-align: center; font-weight: bold;" | AirToSat
| Allows to switch directly from air/cable to sat (to air/cable) source without having to explore TV menus or use any key macro to do so.
|
|-
| style="text-align: center; font-weight: bold;" | FakeEDID
| This patch allows to override HDMI EDIDs, mainly for TV to request and pass non-PCM (=AC3/DTS) audio from HDMI sources.
|
|-
| style="text-align: center; font-weight: bold;" | SpdifMode
| Patch allows to quickly switch Spdif mode between available ones (PCM/DD or PCM/DTS) without having to explore TV menus or use any key macro.
|
|-
| style="text-align: center; font-weight: bold;" | GameMode
| Allows to directly set/unset "Game Mode" where all picture improvements such as "Motion Plus" (="camcorder" effect), "Motion Plus LED" and so on are disabled.
|
|-
| style="text-align: center; font-weight: bold;" | ToolsMenu
| Adds some entries to TV Tools Menu: Aerial(=antenna), Signal Information, Picture Size and Subtitle.
|
|-
| style="text-align: center; font-weight: bold;" | Sound Feedback Volume
| This changes the default volume level values for sound feedback. After running the patch you have to enter menu and change the value. Then TV will use new value and it will remember it even after reboot.
|-
| style="text-align: center; font-weight: bold;" | RCremap with CMD support
| With this tool you can re-define keys of your remote control + you can start bash script with some key-press of RC.
|-
| style="text-align: center; font-weight: bold;" | Game Enable patch
| Patch removes limitation to start native applications/games on SmartHub
|-
| style="text-align: center; font-weight: bold;" | ChanList
| Outputs to log full/current/favorites channels list and some more related infos.
|-
| style="text-align: center; font-weight: bold;" | SoftPowerOff
| Patch prevents TV to enter in deep standby mode on power off. It will enter in "soft-off" mode instead, the same state as on scheduled recording. It means rooting and access to TV remains while powered off and as a consequence immediately on power on.
|-
| style="text-align: center; font-weight: bold;" | LockTV
| Patch immediately locks TV with pincode on injection, and won't allow watching any channel/source until right pincode is entered. As soon as it's unlocked, pincode will never be prompted anymore. Can be useful to launch on startup for *full* parental lock.
|-
| style="text-align: center; font-weight: bold;" | Alert
| Lib displays user-defined text popups or message box on TV. Also has a feature to make screen blink on injection.
|-
| style="text-align: center; font-weight: bold;" | RepeatPVR
| Patch will force PVR to restart recording if ever it stopped unexpectedly, for example on signal loss.
|-
| style="text-align: center; font-weight: bold;" | CMDonPVR
| Allows to run scripts or system commands on PVR recording start/stop.
|-
| style="text-align: center; font-weight: bold;" | NoDRM patch
| PVR without encryption. Allows to watch recorded movie on other devices
|-
| style="text-align: center; font-weight: bold;" | PVRAnyDev
| Removes limitation to use only xfs (E series) or ext4 (F series) formatted USB dongles for your PVR recordings. Changes are only affected to newly attached USB dongles (or you have re-plug existing one). You can use any by TV supported filesystem (fat32, NTFS) for your PVR recordings.
|-
| style="text-align: center; font-weight: bold;" | PVRtoTS
| This thing hooks a bunch of functions in exeTV, grabs drm key, decrypts while recording and saves a .ts file in contents dir
|
|}

'''B series''' owners have to look at: '''[[Content_Library_applications_list | Content Library applications list]]'''. There you`ll find all patches (apps) what you can use on your TV.

----

Noticed bugs? errors?, write in [[Talk:Injectso_patches | '''Discussion''']] page. 
p.s. only for users with editor permissions.

Template:Yellow

2018-02-11T13:59:45Z

Juuso: Created page with "{{{1}}}"

{{{1}}}

Template:BgYellow

2018-02-11T13:58:52Z

Juuso: Created page with "{{{1}}}"

{{{1}}}

Main Page

2018-02-10T16:10:54Z

Juuso:

== Welcome to SamyGO Wiki ==

{|border="0" cellpadding="5" cellspacing="0"
!width="480"|[[File:Logo.png]]
!align="left" valign="top"|<center>
{{red |
'''<big>WARNING</big>: DO NOT UPDATE THE SAMSUNG LATEST FIRMWARE UPGRADES or YOU CAN NOT USE OUR HACKS AND CAN NOT REVERT FIRMWARE BACK EASILY!'''
}}</center>

----

 

NOTE: For editing permissions, please send a request to ([https://forum.samygo.tv/ucp.php?i=pm&mode=compose&u=68 Erdem_ua] or [https://forum.samygo.tv/memberlist.php?mode=viewprofile&u=791 juusso]). Make sure to include a reason why you want to edit our wiki.

|}

== Compatibility Overview ==
See the [[Compatibility]] page to see which TV models should work.

 
== Safety Measures (which you shouldn't start without) ==
#Have a working [[Enable Serial Console on non CI+ Devices|Ex-Link cable]] at hand.
#Ensure the backup ''exe.img'' ( stored on ''/dev/tbml10'' ) is in good condition ( and ideally not altered ).
#Ensure your RS232 Setting in the Service-Menu is set to "debug" and that the Watchdog option in the service-menu is turned off (''Control'' -> ''SubOption'').
#Know that your TV will reset RS232 jack back to UART mode after new firmware installation or reverting back to old version.

 
== Useful WIKI articles ==
<big>Do you want to hack your TV? </big>
* [[This is the first document you have to read]]
*[[Is my TV supported?]]
*[[Do the SamyGO tools void my warranty?]]
*'''[[SamyGO for DUMMIES]]'''

*[[The M/Q Series Wiki]]
*[[The K Series Wiki]]
*[[The J Series Wiki]]
*[[The H Series Wiki]]
*[[The F Series Wiki]]
*[[The E Series Wiki]]
*[[The D Series Wiki]]
*[[The C Series Wiki]]
*[[The B Series Wiki]]
*[[The A Series Wiki]]

*'''[[Injectso_patches | Injectable exeDSP/exeTV patches]]'''
*[[Using NoN-Samsung USB WiFi dongles with TV]]
*[http://en.wikipedia.org/wiki/SamyGO Wikipedia article] - ''spread the word''
*[[SamyGO on WEB]] - Articles about SamyGO
*[[Calibration]] - How to calibrate your TV.

 
=== General Information ===
*[[Samsung TV Skype Cameras]]
*[[Samsung 3D Glasses]]
*[[Card Sharing between TVs]]
*[[Frequently Asked Questions]]
*[[Service Manuals]]
*[[Service Menu]]
*[[Engineering Codes]]
*[[Top Debug Menu: TDM]]
*[[Media Play and DLNA]]
*[[DLNA format Requirements]]
*[[Samsung channel list format]]
*[[MessageBoxService request format]]
*[[Samsung TV network remote control protocol]]
*[[Wireshark Dissector for Samsung remote protocol]]
*[[Samsung OTN protocol]]
*[[RFS file system support for linux]]
*[[Donation List of SamyGO Project]]
*[[Acronyms & Abbreviations]]

 

== SamyGO DIY Hardwares ==
*[[SamyGO Brightness Sensor]]
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]''' (e.g. send Factory + 3SPEED codes)
*'''[[Enable Serial Console on non CI+ Devices |Ex-Link Cable for B-Series]]'''
*'''[[Ex-Link Cable for C/D/E Series and BD players]]'''
*'''[[Ex-Link Cable for J/K/M/Q Series]]'''
*'''[[Ethernet multi-function Interface]]'''
*[[Upgrade TV by replacing mainboard]]
*'''[[UnBricking TV by EEPROM Reset]]'''
*[[SmoothBacklight:_a_Hardware_Mod_for_Improving_Backlight_PWM_Frequency_of_Your_TV | SmoothBacklight: a Hardware Mod for Improving Backlight PWM Frequency of Your TV]]
 

== Interesting Reference Material ==
*[http://www.samsung.com/global/business/semiconductor/products/flash/downloads/applicationnote/rfs_v12_application_note.pdf Introduction to SAMSUNG's Linux Flash File System - RFS]
*[http://www.samsung.com/global/business/semiconductor/products/fusionmemory/downloads/RFS_130_Porting_Guide.pdf Linux RFS ( Robust FAT File System ) Porting Guide]
The file-system used in the the recent Samsung TVs is "RFS". Its proprietary nature and consequently so the absence of an according Linux RFS-Module in the standard Linux distributions makes it currently impossible to modify files by simply mounting the respective image as "RW", modifying it and saving the respective image again. This is the reason why currently all changes are done via patching of the image-binaries.
[http://forum.samygo.tv/viewtopic.php?f=4&t=1399 But the hope never dies].
*[http://www.samsung.com/global/business/semiconductor/products/flash/downloads/LinuStoreII_GPL%20Compliance_10.pdf License info about XRS and TinyXSR in Linux kernel and u-boot]
*[http://opensource.samsung.com Samsung's source codes] or [http://www.samsung.com/global/opensource/ old source code site]
All the source code Samsung is legally obliged to post can be found here.
*[http://forums.cnet.com/samsung-forum Official Samsung Forums]
Should be able to find useful info somewhere.

 
== Disclaimer ==
Neither this WIKI/Forum nor the author(s) of articles and information provided accept any responsibility for damage that may be caused by use of the information provided. You do everything at your own risk. Be aware that "hacking" activities may void your warranty!
<center>
<big>'''[[Crew List]]'''</big>
 & [[Rest In Peace]]
</center>

How to send FACTORY+3SPEED keys

2017-11-26T14:10:44Z

Juuso:

Here are known several ways how to send IR codes (most required to unlock Extended service menu options) to TV. 
You don`t need to use all described methods, it is enough to have one which works on your TV keeping in mind we need to send custom codes rare, most cases only once while unlocking PVR [http://wiki.samygo.tv/index.php5/Activating_PVR_on_D5500] or GuidePlus [http://wiki.samygo.tv/index.php5/Enabling_the_PVR_for_C-Series], change your Internet@TV region [http://wiki.samygo.tv/index.php5/How_to_change_your_Internet@TV_region], change model to get extra functionality on low end cheap C and D series TV`s [http://wiki.samygo.tv/index.php5/Enabling_Video_playback_on_C350], Enable MHP [http://wiki.samygo.tv/index.php5/How_to_enable_MHP_for_C-Series], enable Internet@tv in UC6000 T-valdeuc Tvs [http://wiki.samygo.tv/index.php5/How_to_enable_Internet@tv_in_UC6000_T-valdeuc_Tvs] or change locked by default other service menu options on C/D/E series TV`s and BD players...
 
All methods are cross-compatible, because the goal is to get Extended Service Menu, desn`t matter which way to use for that. In all cases (except switching on to hotel mode on C series), it is needed to send two codes to TV, FACTORY and 3SPEED '''while being in service menu'''. 
 
'''CAUTION!''', the danger to brick TV is high. You can harm your TV by changing values in service menu. Be 100% sure what you`re doing there. 
[[File:Servicemenu.jpg]] 

You can easily enter Service menu by pressing INFO & FACTORY when the TV is on. At this moment Local set and others options are unlocked. Use any of available methods below:

=Send IR using your phone=

==Android smartphones with built-in IR port==
[[File:SRC.png|150px|thumb|right]]
==='''{{red | Recommended!}}''' Service Remote Control Samsung-TV '''(SRC)'''===

This is easiest and [[How_to_send_FACTORY%2B3SPEED_keys#Recommended.21_Service_Remote_Control_Samsung-TV_.28SRC.29|recommended]] way to access Extended Service Menu for most samsung TV`s.
[https://forum.samygo.tv/download/file.php?id=8951 '''Direct download SRC here''']
*Unzip downloaded zip archive
*Install 'com.wolf.servicercsam.downloader.apk' on your phone.
*Run SRC app and use S1, S2, S3 keys to send Info, Factory and 3Speed codes as required.
S1 - INFO
S2 - FACTORY
S3 - 3SPEED
*More information on forum: http://forum.samygo.tv/viewtopic.php?f=74&t=10405#p88075
App is also available on [https://play.google.com/store/apps/details?id=com.wolf.servicercsam google play].

===Universal Remote app===
We will use next buttons for our goal:
Play - FACTORY
Pause - 3SPEED

::Suitable models::
*Samsung galaxy series with built in IR: '''[https://play.google.com/store/apps/details?id=remote.control.samsung Samsung IR - Universal Remote]'''(free version) or [https://play.google.com/store/apps/details?id=remote.control.samsungpro Pro version]
*HTC phones with built in IR blaster: '''[https://play.google.com/store/apps/details?id=com.htc.sample.ir HTC IR - Universal Remote]'''
*Other devices: for more info check '''http://www.power7.net/'''
====Setup your controls====
*Install and start '''Universal Remote''' (see above).(pic 1).
*Scroll down and open RED labeled '''{{red | My Remote Control 1 (TV)}}''' (pic 2), you will see buttons (pic 3).
:::('''NB!''' {{red|Do not use}} '''Remote GUI 1''' from menu at the top right corner neither "My IR REMOTE GUI", nor any other option like "My Remote Control 1 (TV) GUI" which is in cyan color, which brings you to real-remote like view as you have now! Do not use any button where is "GUI" in the name :))
*Scroll down and you will notice input fields beginning with ''Insert IR code string for...'' and button name.(pic 4).
*scroll even down and find ''Insert IR code string for Play...'' and replace the code which exists there to the hex code of FACTORY (pic5):
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689</pre>
*find ''Insert IR code string for Pause'' and replace to hex code for 3SPEED:
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689
</pre>
*Navigate to the bottom and hit ''Save the IR codes'' and exit setup (with return)(pic 6).

====Sending custom key codes====
Click on '''My Remote Control TV 1 GUI''' (cyan color)(pic 7).
*Press Play and/or Pause (or your combinations) when required to send FACTORY and 3SPEED codes (pic 8).
Screenshots:
<gallery>
Image:SamsungIR-1.png|pic 1.
Image:SamsungIR-2.png|pic 2.
Image:SamsungIR-3.png|pic 3.
Image:SamsungIR-4.png|pic 4.
Image:SamsungIR-5.png|pic 5.
Image:SamsungIR-6.png|pic 6.
Image:SamsungIR-7.png|pic 7.
Image:SamsungIR-8.png|pic 8.
</gallery>
==Symbian based phones==
Example with symbian based phone containing IR (infrared) port on board (Nokia N93, E51 etc). 
The phone '''must''' be rooted. 
Install '''Psiloc.irRemote.v1.04.sis''' and start it. The app you can easy find on the internet. 
Choose the '''AA59-00316b''' remote config and test it on your TV. 
Download '''Samsung Service_Remote''' using gprs (or wifi if exists) from applications internet server. Choose this config (the author is [http://forum.samygo.tv/memberlist.php?mode=viewprofile&u=10547 Gia90]) 
Now you have service codes: 7 for 3SPEED and 9 for FACTORY 

=samyGOrc (Rooted E/F ONLY)=
Root is mandatory, it means you need to have SamyGO already installed and wait for it to load in the background after opening Service Menu (about 1 minute until you gain FTP and Telnet access to TV)
: 1. Download and extract [http://forum.samygo.tv/download/file.php?id=3597 samyGOrc-v1.0.zip]
: 2. Connect to TV by FTP and copy extracted '''samyGOrc''' file to '''/mnt/opt/privateer/usr/bin'''
: 3. Telnet to TV and set file permissions
: <pre>chmod 755 /mnt/opt/privateer/usr/bin/samyGOrc</pre>
Steps above won't be necessary anymore if ever you need to use again this method, and might not be necessary at all on F where samyGOrc should be available by default. Now samyGOrc is installed and has execute rights. Only next step should be enough then.
: 4. Telnet to TV command to send consecutively FACTORY (=59) and 3SPEED (=60) keys
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 59; samyGOrc -p $(pidof exeTV || pidof exeDSP) 60</pre>
On the same principle, it's also possible to directly access ''extended'' service menu from "normal" TV state (TV ON, not already in service menu) by sending INFO (=31) + FACTORY (=59) keys (equivalent to INFO+MENU+MUTE+POWER from TV OFF then FACTORY+3SPEED) the same way. In order to achieve this, Telnet command:
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 31; samyGOrc -p $(pidof exeTV || pidof exeDSP) 59</pre>
This latest command could possibly allow access to ''extended'' service menu on some rooted '''E/F Bluray players''' as well.

=ruSamsungTVCommunicator (ruSTVC)=
[[File:RuSamsungTVCommunicator.png|right|350px|ruSamsungTVCommunicator]]
Software way and easiest way to reach your goal. This only works on TV`s with ethernet/wifi port and on models where the network remote control function isn`t disabled (all high end C, D and E series). However, it doesn't work any longer on most recent models/firmwares. 
1. Download the application from [http://samsung.rainerullrich.de author`s page]. 
2. Start ruSTVC on PC, and when asked, enable access to control TV on TV screen. If no popup appeared, navigate to 
Menu->System->Network Remote Control ->ruSTVC
and set ''allow'' 
3. Power off TV, enter to service menu (INFO MENU MUTE POWER on your RC) 
4. Press FACTORY and after this 3SPEED buttons on ruSTVC application. 
 
=Arduino project '''Ethernet to IR'''=
* '''[[Ethernet to IR and Serial Console Interface]]'''
 

=Original SamsungTV Factory Remote=
[[File:AA8100243A.png|Samsung Factory remote controller|50px|right]]
 
The part number of this remote is: '''AA8100243A''' 
This way to send Factory codes to TV is quite expensive, because the cost of this remote is 21-80$ on different internet stores. 
BTW we don`t know if it able to send 3SPEED code, because this button is missing.
Needed anyone who could confirm. 
 

=Programable universal remotes=
If you have programable RC like '''"One For All" URC-7320''' or similar, you also can send required codes to TV.
 

=Build your own IR transmitter=
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]'''

=IR blaster=
Many high-end TVs come bundled with an IR blaster, its use is similar to own built IR transmitter [http://wiki.samygo.tv/index.php5/Change_region_(Local_Set)_on_F_series]

 
 
=References=
 
 

--[[User:Zoelechat|Zoelechat]] ([[User talk:Zoelechat|talk]]) 19:30, 20 December 2014 (UTC)
--[[User:Juuso|Juuso]] ([[User talk:Juuso|talk]]) 12:51, 16 August 2016 (UTC)

How to send FACTORY+3SPEED keys

2017-11-26T14:10:07Z

Juuso:

Here are known several ways how to send IR codes (most required to unlock Extended service menu options) to TV. 
You don`t need to use all described methods, it is enough to have one which works on your TV keeping in mind we need to send custom codes rare, most cases only once while unlocking PVR [http://wiki.samygo.tv/index.php5/Activating_PVR_on_D5500] or GuidePlus [http://wiki.samygo.tv/index.php5/Enabling_the_PVR_for_C-Series], change your Internet@TV region [http://wiki.samygo.tv/index.php5/How_to_change_your_Internet@TV_region], change model to get extra functionality on low end cheap C and D series TV`s [http://wiki.samygo.tv/index.php5/Enabling_Video_playback_on_C350], Enable MHP [http://wiki.samygo.tv/index.php5/How_to_enable_MHP_for_C-Series], enable Internet@tv in UC6000 T-valdeuc Tvs [http://wiki.samygo.tv/index.php5/How_to_enable_Internet@tv_in_UC6000_T-valdeuc_Tvs] or change locked by default other service menu options on C/D/E series TV`s and BD players...
 
All methods are cross-compatible, because the goal is to get Extended Service Menu, desn`t matter which way to use for that. In all cases (except switching on to hotel mode on C series), it is needed to send two codes to TV, FACTORY and 3SPEED '''while being in service menu'''. 
 
'''CAUTION!''', the danger to brick TV is high. You can harm your TV by changing values in service menu. Be 100% sure what you`re doing there. 
[[File:Servicemenu.jpg]] 

=Send IR using your phone=

==Android smartphones with built-in IR port==
[[File:SRC.png|150px|thumb|right]]
==='''{{red | Recommended!}}''' Service Remote Control Samsung-TV '''(SRC)'''===

You can easily enter Service menu by pressing INFO & FACTORY when the TV is on. At this moment Local set and others options are unlocked. Use any of available methods below:

This is easiest and [[How_to_send_FACTORY%2B3SPEED_keys#Recommended.21_Service_Remote_Control_Samsung-TV_.28SRC.29|recommended]] way to access Extended Service Menu for most samsung TV`s.
[https://forum.samygo.tv/download/file.php?id=8951 '''Direct download SRC here''']
*Unzip downloaded zip archive
*Install 'com.wolf.servicercsam.downloader.apk' on your phone.
*Run SRC app and use S1, S2, S3 keys to send Info, Factory and 3Speed codes as required.
S1 - INFO
S2 - FACTORY
S3 - 3SPEED
*More information on forum: http://forum.samygo.tv/viewtopic.php?f=74&t=10405#p88075
App is also available on [https://play.google.com/store/apps/details?id=com.wolf.servicercsam google play].

===Universal Remote app===
We will use next buttons for our goal:
Play - FACTORY
Pause - 3SPEED

::Suitable models::
*Samsung galaxy series with built in IR: '''[https://play.google.com/store/apps/details?id=remote.control.samsung Samsung IR - Universal Remote]'''(free version) or [https://play.google.com/store/apps/details?id=remote.control.samsungpro Pro version]
*HTC phones with built in IR blaster: '''[https://play.google.com/store/apps/details?id=com.htc.sample.ir HTC IR - Universal Remote]'''
*Other devices: for more info check '''http://www.power7.net/'''
====Setup your controls====
*Install and start '''Universal Remote''' (see above).(pic 1).
*Scroll down and open RED labeled '''{{red | My Remote Control 1 (TV)}}''' (pic 2), you will see buttons (pic 3).
:::('''NB!''' {{red|Do not use}} '''Remote GUI 1''' from menu at the top right corner neither "My IR REMOTE GUI", nor any other option like "My Remote Control 1 (TV) GUI" which is in cyan color, which brings you to real-remote like view as you have now! Do not use any button where is "GUI" in the name :))
*Scroll down and you will notice input fields beginning with ''Insert IR code string for...'' and button name.(pic 4).
*scroll even down and find ''Insert IR code string for Play...'' and replace the code which exists there to the hex code of FACTORY (pic5):
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689</pre>
*find ''Insert IR code string for Pause'' and replace to hex code for 3SPEED:
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689
</pre>
*Navigate to the bottom and hit ''Save the IR codes'' and exit setup (with return)(pic 6).

====Sending custom key codes====
Click on '''My Remote Control TV 1 GUI''' (cyan color)(pic 7).
*Press Play and/or Pause (or your combinations) when required to send FACTORY and 3SPEED codes (pic 8).
Screenshots:
<gallery>
Image:SamsungIR-1.png|pic 1.
Image:SamsungIR-2.png|pic 2.
Image:SamsungIR-3.png|pic 3.
Image:SamsungIR-4.png|pic 4.
Image:SamsungIR-5.png|pic 5.
Image:SamsungIR-6.png|pic 6.
Image:SamsungIR-7.png|pic 7.
Image:SamsungIR-8.png|pic 8.
</gallery>
==Symbian based phones==
Example with symbian based phone containing IR (infrared) port on board (Nokia N93, E51 etc). 
The phone '''must''' be rooted. 
Install '''Psiloc.irRemote.v1.04.sis''' and start it. The app you can easy find on the internet. 
Choose the '''AA59-00316b''' remote config and test it on your TV. 
Download '''Samsung Service_Remote''' using gprs (or wifi if exists) from applications internet server. Choose this config (the author is [http://forum.samygo.tv/memberlist.php?mode=viewprofile&u=10547 Gia90]) 
Now you have service codes: 7 for 3SPEED and 9 for FACTORY 

=samyGOrc (Rooted E/F ONLY)=
Root is mandatory, it means you need to have SamyGO already installed and wait for it to load in the background after opening Service Menu (about 1 minute until you gain FTP and Telnet access to TV)
: 1. Download and extract [http://forum.samygo.tv/download/file.php?id=3597 samyGOrc-v1.0.zip]
: 2. Connect to TV by FTP and copy extracted '''samyGOrc''' file to '''/mnt/opt/privateer/usr/bin'''
: 3. Telnet to TV and set file permissions
: <pre>chmod 755 /mnt/opt/privateer/usr/bin/samyGOrc</pre>
Steps above won't be necessary anymore if ever you need to use again this method, and might not be necessary at all on F where samyGOrc should be available by default. Now samyGOrc is installed and has execute rights. Only next step should be enough then.
: 4. Telnet to TV command to send consecutively FACTORY (=59) and 3SPEED (=60) keys
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 59; samyGOrc -p $(pidof exeTV || pidof exeDSP) 60</pre>
On the same principle, it's also possible to directly access ''extended'' service menu from "normal" TV state (TV ON, not already in service menu) by sending INFO (=31) + FACTORY (=59) keys (equivalent to INFO+MENU+MUTE+POWER from TV OFF then FACTORY+3SPEED) the same way. In order to achieve this, Telnet command:
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 31; samyGOrc -p $(pidof exeTV || pidof exeDSP) 59</pre>
This latest command could possibly allow access to ''extended'' service menu on some rooted '''E/F Bluray players''' as well.

=ruSamsungTVCommunicator (ruSTVC)=
[[File:RuSamsungTVCommunicator.png|right|350px|ruSamsungTVCommunicator]]
Software way and easiest way to reach your goal. This only works on TV`s with ethernet/wifi port and on models where the network remote control function isn`t disabled (all high end C, D and E series). However, it doesn't work any longer on most recent models/firmwares. 
1. Download the application from [http://samsung.rainerullrich.de author`s page]. 
2. Start ruSTVC on PC, and when asked, enable access to control TV on TV screen. If no popup appeared, navigate to 
Menu->System->Network Remote Control ->ruSTVC
and set ''allow'' 
3. Power off TV, enter to service menu (INFO MENU MUTE POWER on your RC) 
4. Press FACTORY and after this 3SPEED buttons on ruSTVC application. 
 
=Arduino project '''Ethernet to IR'''=
* '''[[Ethernet to IR and Serial Console Interface]]'''
 

=Original SamsungTV Factory Remote=
[[File:AA8100243A.png|Samsung Factory remote controller|50px|right]]
 
The part number of this remote is: '''AA8100243A''' 
This way to send Factory codes to TV is quite expensive, because the cost of this remote is 21-80$ on different internet stores. 
BTW we don`t know if it able to send 3SPEED code, because this button is missing.
Needed anyone who could confirm. 
 

=Programable universal remotes=
If you have programable RC like '''"One For All" URC-7320''' or similar, you also can send required codes to TV.
 

=Build your own IR transmitter=
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]'''

=IR blaster=
Many high-end TVs come bundled with an IR blaster, its use is similar to own built IR transmitter [http://wiki.samygo.tv/index.php5/Change_region_(Local_Set)_on_F_series]

 
 
=References=
 
 

--[[User:Zoelechat|Zoelechat]] ([[User talk:Zoelechat|talk]]) 19:30, 20 December 2014 (UTC)
--[[User:Juuso|Juuso]] ([[User talk:Juuso|talk]]) 12:51, 16 August 2016 (UTC)

UnBricking TV by EEPROM Reset

2017-06-16T19:30:14Z

Juuso:

Here we will show you how to reset your TV by resetting the SoC EEPROM. This can be very useful in case you have bricked your TV by messing with some of its internal settings, which can easily happen if you mess around in the Service Menu. It is highly recommended to take photos of each screen in the service menu, showing your original firmware settings, before changing anything!

=Blind Factory Reset=
Before trying to EEPROM reset, please try a factory reset, that might revive your TV also.

Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter"

[http://www.samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=5306&prd_ia_cd=N0000058&map_seq=31175 Samsung Documentation]

'''This wiki entry will not help resolve a TV bricked by firmware flashing.'''

One example (from the original post of this wiki):
''This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it.
After with help of Juzis we unbricked device with the same way of C series TVs... Here I wanted to try to let
you know how the process is working. Firstly, this hack doesn't work if you bricked you device by
firmware flashing... This hacks just removes service menu settings and let you give another chance
to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like
Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu.
You can also ask help from our forums.''

=EEPROM=
EEPROM is a short of ''electrically erasable programmable read only memory'', which is actually a chip. There are several EEPROM chips used in Samsung TVs. All service menu settings are kept in the so called SoC EEPROM. You can delete and reprogram this chips millions time. So they are fast and reliable...

=Reseting NVRAM (EEPROM)=

For resetting TV, settings, you needed to remove SoC EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of SoC EEPROM. EEPROMs on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.

To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.

Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.

[[File:UE40D5000 RESET MESSAGE.JPG|center|300px| UE40D5000 Reset message]]

=Where do I find the SoC EEPROM chip?=
:Its located near CPU (SoC) at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the [http://pdf1.alldatasheet.com/datasheet-pdf/view/22813/STMICROELECTRONICS/M24512-RBN6.html 24512 Chip Datasheet here]. In picture, white triangle shows the first pin.
==B Series SoC EEPROM Location==
===LExxB550===
You have to search for eeprom on '''back side''' of mainboard. IC3001 
[[Image:LExxB55x_mainboard_front.JPG|270px|B550 mainboarboard front side]]
[[Image:LE46B550A5W full.jpg|270px|B550 mainboarboard back side]]
[[Image:LExxB550_eeprom.png|270px|B550 eeprom reset. Red line!]]
===LExxB6000===
[[Image:Samsung_UExxB6000_mainboard.jpg|250px|B6000 mainboarboard]]
[[Image:Samsung_UE32_B6000_eeprom_reset.jpg|270px|eeprom location, reset procedure]]

==C Series SoC EEPROM Location==
===LExxC550/530===
[[Image:C550_full.jpg|270px|C550/530 Board]]
[[Image:C550_reset.jpg|200px|C550/530 reset. Red line!]]
 

===LAxxC650===
[[Image:LA40C650full.jpg|150px|LA40C650 Board]]
[[Image:LA40C650_eeprom_is_C.jpg|225px|LA40C650 eeprom`s place]]
[[Image:LA40C650_eeprom_reset.jpg|202px|LA40C650 reset]]
 
===UAxxC6200===
[[Image:UA40C6200_full.jpg|150px|UA40C6200 Board]]
[[Image:UA40C6200_1.jpg|285px|UA40C6200 reset]]
===UExxC7700===
<gallery>
Image:DSC 0272 resized marked.jpg|UE46C7700 Board (back side of mainboard)
Image:DSC 0273 resized.jpg|UE46C7700 eeprom
</gallery>

===OTHER===
please fill up missing models. Thanks!
 

==D Series SoC EEPROM Location==
===D5000===
<gallery>
Image:UE40D5000 Board.JPG|UE40D5000 Board
Image:UE40D5000 EEPROM.JPG|UE40D5000 EEPROM Chip and UnBrick way
</gallery>

===D4003/5003===
<gallery>
Image:UE40D5003_Board.jpg|UE40D5003 Board
Image:UE40D5003_EEprom_reset.jpg|UE40D5003 EEPROM Chip and UnBrick way
</gallery>

===D550===
<gallery>
Image:le32d550_mainboard.jpg|LExxD550 Board
Image:le32d550_eeprom.jpg|LExxD550 EEPROM Chip and UnBrick way
</gallery>

===D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx===
<gallery>
Image:UA40D6000_Board_EEPROM.jpg|UA40D6000 Board
Image:EEPROM_Reset.jpg|UA40D6000 EEPROM Chip and UnBrick way
</gallery>

==BD (BlueRay DVD Player) SoC EEPROM Location==
===BD-D8X00===
<gallery>
Image:Bd-d8900_Board.png|BD-D8900 Board
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

===BD-E8X00===
<gallery>
Image:Bd-e8300_Board.png|BD-D8900 Board
Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

==ES-series SoC EEPROM Location==
This may also be compatible with the "E"-series...
Do check forums for latest info.

===UNxxES7500, UE55ES8090===
<gallery>
Image:UNxxES7500_Eeprom_location.jpg|UNxxES7500 Board
Image:UNxxES7500_Eeprom.jpg|UNxxES7500 Reset EEPROM
</gallery>

==F series SoC EEPROM location==

===UExxFxxxx===
Applicable for TV models with mainboard: '''BN41-01958A/BN41-01958B''':
 
*UExxF45xx 
*UExxF53xx 
*UExxF55xx 
*UExxF62xx 
*UExxF63xx 
*UExxF64xx 
*UExxF65xx 
*UExxF66xx 
*UExxF68xx 
Main eeprom: IC901 (ATMLH348 or AT24C256). Unbricking possible two ways: Short circuit on RED or BLUE.
<gallery>
Image:UExxFxxx.jpg|BN41-01958A/B
</gallery>

===UExxF8000===
<gallery>
Image:UExxF8000.jpg|UExxF8000
</gallery>

Main Page

2017-06-08T16:28:19Z

Juuso: /* SamyGO DIY Hardwares */

== Welcome to SamyGO Wiki ==

{|border="0" cellpadding="5" cellspacing="0"
!width="480"|[[File:Logo.png]]
!align="left" valign="top"|<center>
{{red |
'''<big>WARNING</big>: DO NOT UPDATE THE SAMSUNG LATEST FIRMWARE UPGRADES or YOU CAN NOT USE OUR HACKS AND CAN NOT REVERT FIRMWARE BACK EASILY!'''
}}</center>

----

 

NOTE: For editing permissions, please send a request to ([https://forum.samygo.tv/ucp.php?i=pm&mode=compose&u=68 Erdem_ua] or [https://forum.samygo.tv/memberlist.php?mode=viewprofile&u=791 juusso]). Make sure to include a reason why you want to edit our wiki.

|}

== Compatibility Overview ==
See the [[Compatibility]] page to see which TV models should work.

 
== Safety Measures (which you shouldn't start without) ==
#Have a working [[Enable Serial Console on non CI+ Devices|Ex-Link cable]] at hand.
#Ensure the backup ''exe.img'' ( stored on ''/dev/tbml10'' ) is in good condition ( and ideally not altered ).
#Ensure your RS232 Setting in the Service-Menu is set to "debug" and that the Watchdog option in the service-menu is turned off (''Control'' -> ''SubOption'').
#Know that your TV will reset RS232 jack back to UART mode after new firmware installation or reverting back to old version.

 
== Useful WIKI articles ==
<big>Do you want to hack your TV? </big>
* [[This is the first document you have to read]]
*[[Is my TV supported?]]
*[[Do the SamyGO tools void my warranty?]]
*'''[[SamyGO for DUMMIES]]'''
*[[The A Series Wiki]]
*[[The B Series Wiki]]
*[[The C Series Wiki]]
*[[The D Series Wiki]]
*[[The E Series Wiki]]
*[[The F Series Wiki]]
*[[The H Series Wiki]]
*'''[[Injectso_patches | Injectable exeDSP/exeTV patches]]'''
*[[Using NoN-Samsung USB WiFi dongles with TV]]
*[http://en.wikipedia.org/wiki/SamyGO Wikipedia article] - ''spread the word''
*[[SamyGO on WEB]] - Articles about SamyGO
*[[Calibration]] - How to calibrate your TV.

 
=== General Information ===
*[[Samsung TV Skype Cameras]]
*[[Samsung 3D Glasses]]
*[[Card Sharing between TVs]]
*[[Frequently Asked Questions]]
*[[Service Manuals]]
*[[Service Menu]]
*[[Engineering Codes]]
*[[Top Debug Menu: TDM]]
*[[Media Play and DLNA]]
*[[DLNA format Requirements]]
*[[Samsung channel list format]]
*[[MessageBoxService request format]]
*[[Samsung TV network remote control protocol]]
*[[Wireshark Dissector for Samsung remote protocol]]
*[[Samsung OTN protocol]]
*[[RFS file system support for linux]]
*[[Donation List of SamyGO Project]]
*[[Acronyms & Abbreviations]]

 

== SamyGO DIY Hardwares ==
*[[SamyGO Brightness Sensor]]
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]''' (e.g. send Factory + 3SPEED codes)
*'''[[Enable Serial Console on non CI+ Devices |Ex-Link Cable for B-Series]]'''
*'''[[Ex-Link Cable for C/D/E Series and BD players]]'''
*'''[[Ex-Link Cable for J/K/M/Q Series]]'''
*'''[[Ethernet multi-function Interface]]'''
*[[Upgrade TV by replacing mainboard]]
*'''[[UnBricking TV by EEPROM Reset]]'''
*[[SmoothBacklight:_a_Hardware_Mod_for_Improving_Backlight_PWM_Frequency_of_Your_TV | SmoothBacklight: a Hardware Mod for Improving Backlight PWM Frequency of Your TV]]
 

== Interesting Reference Material ==
*[http://www.samsung.com/global/business/semiconductor/products/flash/downloads/applicationnote/rfs_v12_application_note.pdf Introduction to SAMSUNG's Linux Flash File System - RFS]
*[http://www.samsung.com/global/business/semiconductor/products/fusionmemory/downloads/RFS_130_Porting_Guide.pdf Linux RFS ( Robust FAT File System ) Porting Guide]
The file-system used in the the recent Samsung TVs is "RFS". Its proprietary nature and consequently so the absence of an according Linux RFS-Module in the standard Linux distributions makes it currently impossible to modify files by simply mounting the respective image as "RW", modifying it and saving the respective image again. This is the reason why currently all changes are done via patching of the image-binaries.
[http://forum.samygo.tv/viewtopic.php?f=4&t=1399 But the hope never dies].
*[http://www.samsung.com/global/business/semiconductor/products/flash/downloads/LinuStoreII_GPL%20Compliance_10.pdf License info about XRS and TinyXSR in Linux kernel and u-boot]
*[http://opensource.samsung.com Samsung's source codes] or [http://www.samsung.com/global/opensource/ old source code site]
All the source code Samsung is legally obliged to post can be found here.
*[http://forums.cnet.com/samsung-forum Official Samsung Forums]
Should be able to find useful info somewhere.

 
== Disclaimer ==
Neither this WIKI/Forum nor the author(s) of articles and information provided accept any responsibility for damage that may be caused by use of the information provided. You do everything at your own risk. Be aware that "hacking" activities may void your warranty!
<center>
<big>'''[[Crew List]]'''</big>
 & [[Rest In Peace]]
</center>

Enter developer mode on Tizen TV`s

2017-06-07T17:04:49Z

Juuso:

*Go to Apps Screen.
*Click 123 from remote.
*Number keypad gets open up -> Enter 12345 from it and then done.
*A popup asking for IP gets open up.
*Enter IP address of your system (using the same procedure - clicking on 123 from remote).
*You will be asked to reboot TV by holding Power button for 2 secs
*After reboot, Developer mode will be on TV screen in red.
*Now, connect with the IP (TV IP) in your IDE and execute your build.

Read more: http://developer.samsung.com/tv/develop/getting-started/using-sdk/running-app-on-tv#connecting-tv-to-sdk-remote-device

To be updated

Enter developer mode on Tizen TV`s

2017-06-07T17:04:17Z

Juuso:

Enter developer mode on Tizen TV`s

2017-06-07T17:03:39Z

Juuso:

*Go to Apps Screen.
*Click 123 from remote.
*Number keypad gets open up -> Enter 12345 from it and then done.
*A popup asking for IP gets open up.
*Enter IP address of your system (using the same procedure - clicking on 123 from remote).
*You will be asked to reboot TV by holding Power button for 2 secs
*After reboot, Developer mode will be on TV screen in red.
*Now, connect with the IP (TV IP) in your IDE and execute your build.

More with pictures: http://developer.samsung.com/tv/develop/getting-started/using-sdk/running-app-on-tv

To be updated

The J Series Wiki

2017-06-07T16:47:52Z

Juuso:

Here will be the information about Tizen OS and J series soon.

This is a misc. collection of currently known information. It will be organized better over time.

'''J Series Forum:''' http://forum.samygo.tv/viewforum.php?f=83&sid=bb1391eb2668cb6e2d3c3d793dc557b0

'''Service Menu'''

Be VERY careful once in the service menu. Do not try to navigate using LEFT and RIGHT because that changes values. Only navigate through menu items with UP and DOWN.

With TV powered on (requires remote with FACTORY key): [INFO] [FACTORY] (starts service menu with "Advanced" visible but it has no sub-menu)

With TV powered off: [MUTE] [1] [8] [2] on American models and [INFO] [MENU] [MUTE] [POWER] on European models.

'''Console output'''
*'''[[Ex-Link Cable for J/K/M/Q Series]]'''

Ex Link Port - 115,200 N,8,1

RS-232 Jack setting:

UART = no input/output

Debug = system logging output (MUCH more verbose when "Serial Log On/Off" set to ON, which requires a power cycle to take effect)

Logic = no input/output

FANET = no input/output

'''OTN Support Disable (Firmware Upgrades)'''

OTN support cannot be disabled in the service menu. It must be disabled by blocking access to the upgrade servers at the network level.

'''Rooting J series TV (T-HK* fw up to 1480)'''

For now, rooting technique of J series TV is only available to users that donated to our community.

* [https://forum.samygo.tv/viewtopic.php?f=70&p=99518 Related topic on the forum...]

The K Series Wiki

2017-06-07T16:47:15Z

Juuso:

*'''[[Ex-Link Cable for J/K/M/Q Series]]'''
*'''[[Enter developer mode on Tizen TV`s]]'''

*UNDER CONSTRUCTION

To be updated...

The M/Q Series Wiki

2017-06-07T16:46:59Z

Juuso:

*'''[[Ex-Link Cable for J/K/M/Q Series]]'''
*'''[[Enter developer mode on Tizen TV`s]]'''

*UNDER CONSTRUCTION

To be updated...

Enter developer mode on Tizen TV`s

2017-06-07T16:46:31Z

Juuso: Created page with "*Go to Apps Screen. *Click 123 from remote. *Number keypad gets open up -> Enter 12345 from it and then done. *A popup asking for IP gets open up. *Enter IP address of your sy..."

The M/Q Series Wiki

2017-06-07T16:44:18Z

Juuso:

*'''[[Ex-Link_Cable_for_J/K/M/Q_Series]]'''
*'''[[Enter developer mode on Tizen TV`s]]'''

*UNDER CONSTRUCTION

To be updated...

Enable Serial Console on B series TV

2017-06-07T16:23:27Z

Juuso:

Find below the steps you need to follow to enable console access to your '''A and B series CI TV''' via a serial cable. 
'''{{red|If your TV is NOT A or B series, this article is not for you, go to}}: [[Ex-Link Cable for C/D/E Series and BD players]]'''
 
== The Ex-Link (serial) cable for A and B series only==
*Solder yourself ( or buy ) an Ex-Link serial cable to connect to your Samsung TV.

Update: cable schematic is suitable also for J/K/M/Q series Tv`s as well!
[[Ex-Link_Cable_for_J/K/M/Q_Series]]

If you don`t have com port on your PC, you can buy usb to RS232 device from [http://www.ebay.com/sch/?_kw=usb+rs232 ebay or aliexpress] and you get virtual com port over USB.

[[File:Exlink.gif]]

See [http://www.wiremunky.com/file/documents/exlink.gif here] for the Serial Cable specs. You can ignore the rest of the information posted there, as it is not applicable for the more recent Samsung devices.

== Configure your TV for Debug-Mode ==
*Enter Service Menu ( quickly push '''[INFO] [MENU] [MUTE] [POWER]''' on your remote control )
*Change setting for your RS232C interface to "debug" ( Control -> Sub Option -> RS-232 Jack -> [ '''Debug''' | UART | Logic ] )
=== Debug mode at older TV's like B530 series ===
*Enter Service Menu
*Enter "Advanced" menu. To activate `Advanced` menu need to type '0000'
*Advanced => ADJUST => Debug mode [OFF][Debug smart][Debug runtime]

== Start the terminal ==
=== Terminal Connection Parameters ===
*Use following connection parameters with your terminal-client ( e.g. Kermit, Hyper Therminal or ZOC Terminal ):
Baudrate: '''115200'''
Data bits: '''8'''
Parity: '''none'''
Stop bits: '''1'''
Flow Control: '''none'''
For Older models (like B530), you can try lower baudrates (like 9600 bps)
===Linux PC===
On a Linux PC, install 'cu' (call up) tool from the ''uucp'' package and run
<pre>cu -l /dev/ttyUSB0 -s 115200</pre>
===Windows PC===
On a Windows PC, use Hyper Terminal or [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty]. 
After you have started PuTTY, follow the steps in the screen shots below. 
[[File:ExLinkPuttySettings1.png|300px]][[File:ExLinkPuttySettings2.png|300px]]
[[File:ExLinkPutty3.png|600px]]

== Enabling Serial Input ==
*Switch on your TV ... If you did everything right and everything works as expected, then you should see the boot-log on your terminal.
*Enter "'''debug'''" at the invisible prompt ... to enable your serial console. You should see something like below with each keystroke
[SERIAL INPUT MANAGE] 1-th ENABLE Magic serial input match!
[SERIAL INPUT MANAGE] 2-th ENABLE Magic serial input match!
[SERIAL INPUT MANAGE] 3-th ENABLE Magic serial input match!
[SERIAL INPUT MANAGE] 4-th ENABLE Magic serial input match!
[SERIAL INPUT MANAGE] 5-th ENABLE Magic serial input match!
[SERIAL INPUT MANAGE] serial input ENABLE!!!!!

== Debug Menu (On B series CI+ models Too) ==
*When you enter '1198282' numbers '''twice''' after '''debug''' string (each time confirm with ENTER), you will see TOP Debug Menu like that:

====================================
[ TOP Debug Menu]
------------------------------------
1 : SubSystem Print On/Off
2 : Platform Print Setting
3 : TD Print Setting
4 : Performance Print Setting
5 : Sdal Print Setting
6 : Sdal Trace Setting
10 : Factory Debug
11 : TD Debug
12 : SubSystem DBG
20 : Performance File Write
21 : Louvre Print Setting
22 : JavaMW Print Setting
30 : Auto Lock DBG
------------------------------------
50 : ROSE Debug
60 : MediaLink Debug
70 : Jade Debug
====================================
99 : Exit
====================================
DBG> :

=== Activating the serial console from Debug Menu ===
*Enter TOP Debug Menu
*Than enter menu numbers '''11''' : TD Debug -> '''0x04''' : spI Debug -> '''68''' : Shell
will let you drop linux shell on CI devices. Is could true for CI+ devices too. But you cannot use characters on shell of CI+ devices, because kernel filters them, only numbers and enter allowed on CI+ devices...

This approach will do not kill exeDSP. So you don't needed to stop watchdog after dropping linux shell.

=== Activating the serial console (old way) ===
*Now you need to be fast ...
**hit '''CTRL-C''', which stops the exeDSP binary
**immediately after that enter ( you have ca. 3 seconds ... I suggest you cut&paste this command ):
/mtd_boot/MicomCtrl 23'''
This now prevents your LED/LCD to stop and you have a command prompt of the TV-Console.

--[[User:Dynamic1969|Dynamic1969]] 16:17, 3 October 2009 (UTC)

--[[User:Erdem_ua|Erdem_ua]] 21:55, 15 January 2010 (EET)

The M/Q Series Wiki

2017-06-07T16:19:55Z

Juuso: Exlink is same as B series AND J/K series!

*'''[[Ex-Link_Cable_for_J/K/M/Q_Series]]'''
*UNDER CONSTRUCTION

To be updated...

The K Series Wiki

2017-06-07T16:19:05Z

Juuso:

*'''[[Ex-Link_Cable_for_J/K/M/Q_Series]]'''
*UNDER CONSTRUCTION

To be updated...

Ex-Link Cable for J/K/M/Q/N/QN Series

2017-06-07T16:18:06Z

Juuso: added M/Q series info

== Wired ExLink cable ==
[[File:JU7100-inputs-side-large.jpg|200px|thumb|right|JU7100]]On some J/K-series TV and on M/Q series Tv`s, Ex-Link port is located on the separate 3.5mm jack labelled as "EX-LINK".
On Q series Ex-Link port is located on bottom of OneConect box, next to CI slot.

In this case, you need to make Ex-link cable by connecting JACK male to the USB-COM adapter ({{red|'''not''' TTL/LVTTL}}) as shown below.

[[File:Img.jpg|500px]]

Or you can use regular COM port, if your PC have it, but in this case you have to connect pins in reverse order (from left to right) as shown below. You need 2, 3 and 5 pin.

If your PC does not have COM port (like many pc`s nowadays), you can use cheap '''[https://www.aliexpress.com/wholesale?ltype=wholesale&d=y&origin=y&isViewCP=y&spm=2114.01010208.8.42.NMUo8j&initiative_id=QRW_20170607091544&SearchText=usb+rs232+db9+cable&productId=32672290017&blanktest=0&tc=af USB to RS232 COM Port Serial PDA 9 pin DB9 Cable Adapter ]'''.

[[File:Db9-pinout.png]]
== Enable Debug mode in service menu ==
todo
== Start the terminal ==
===Linux PC===
On a Linux PC, install 'cu' (call up) tool from the ''uucp'' package and run
<pre>cu -l /dev/ttyUSB0 -s 115200</pre>
 
===Windows PC===
On Windows, we recommend the free terminal application [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty] or [http://realterm.sourceforge.net/ RealTerm] ([http://sourceforge.net/projects/realterm/ download]). But [http://www.hilgraeve.com/hyperterminal/ HyperTerminal] is also very nice, but not free.

After you have started PuTTY, follow the steps in the screen shots below. 
[[File:ExLinkPuttySettings1.png|300px]][[File:ExLinkPuttySettings2.png|300px]]
[[File:ExLinkPutty3.png|600px]]

Ex-Link Cable for J/K/M/Q/N/QN Series

2017-06-07T16:07:23Z

Juuso: Juuso moved page Ex-Link Cable for J/K Series to Ex-Link Cable for J/K/M/Q Series: confirmed to be working on Q series as well. Supposed to work on M series indeed.

== Wired ExLink cable ==
[[File:JU7100-inputs-side-large.jpg|200px|thumb|right|JU7100]]On some J/K-series TV, Ex-Link port is located on the separate 3.5mm jack labelled as "EX-LINK".

In this case, you need to make Ex-link cable by connecting JACK male to the USB-COM adapter(not TTL/LVTTL) as shown below.

[[File:Img.jpg|500px]]

Or you can use regular COM port, if your PC have it, but in this case you have to connect pins in reverse order (from left to right) as shown below. You need 2, 3 and 5 pin.

[[File:Db9-pinout.png]]
== Enable Debug mode in service menu ==
todo
== Start the terminal ==
===Linux PC===
On a Linux PC, install 'cu' (call up) tool from the ''uucp'' package and run
<pre>cu -l /dev/ttyUSB0 -s 115200</pre>
 
===Windows PC===
On Windows, we recommend the free terminal application [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty] or [http://realterm.sourceforge.net/ RealTerm] ([http://sourceforge.net/projects/realterm/ download]). But [http://www.hilgraeve.com/hyperterminal/ HyperTerminal] is also very nice, but not free.

After you have started PuTTY, follow the steps in the screen shots below. 
[[File:ExLinkPuttySettings1.png|300px]][[File:ExLinkPuttySettings2.png|300px]]
[[File:ExLinkPutty3.png|600px]]

Ex-Link Cable for J/K Series

2017-06-07T16:07:23Z

Juuso: Juuso moved page Ex-Link Cable for J/K Series to Ex-Link Cable for J/K/M/Q Series: confirmed to be working on Q series as well. Supposed to work on M series indeed.

#REDIRECT [[Ex-Link Cable for J/K/M/Q Series]]

The M/Q Series Wiki

2017-04-23T08:18:47Z

Juuso: Placeholder

<<Please fill me with info>>

MediaWiki:Sidebar

2017-04-23T08:17:54Z

Juuso: added M/Q series wiki link

UnBricking TV by EEPROM Reset

2017-01-21T17:45:27Z

Juuso: /* UExxFxxxx */

Here we will show you how to reset your TV by resetting the SoC EEPROM. This can be very useful in case you have bricked your TV by messing with some of its internal settings, which can easily happen if you mess around in the Service Menu. It is highly recommended to take photos of each screen in the service menu, showing your original firmware settings, before changing anything!

=Blind Factory Reset=
Before trying to EEPROM reset, please try a factory reset, that might revive your TV also.

Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter"

[http://www.samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=5306&prd_ia_cd=N0000058&map_seq=31175 Samsung Documentation]

'''This wiki entry will not help resolve a TV bricked by firmware flashing.'''

One example (from the original post of this wiki):
''This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it.
After with help of Juzis we unbricked device with the same way of C series TVs... Here I wanted to try to let
you know how the process is working. Firstly, this hack doesn't work if you bricked you device by
firmware flashing... This hacks just removes service menu settings and let you give another chance
to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like
Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu.
You can also ask help from our forums.''

=EEPROM=
EEPROM is a short of ''electrically erasable programmable read only memory'', which is actually a chip. There are several EEPROM chips used in Samsung TVs. All service menu settings are kept in the so called SoC EEPROM. You can delete and reprogram this chips millions time. So they are fast and reliable...

=Reseting NVRAM (EEPROM)=

For resetting TV, settings, you needed to remove SoC EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of SoC EEPROM. EEPROMs on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.

To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.

Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.

[[File:UE40D5000 RESET MESSAGE.JPG|center|300px| UE40D5000 Reset message]]

=Where do I find the SoC EEPROM chip?=
:Its located near CPU (SoC) at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the [http://pdf1.alldatasheet.com/datasheet-pdf/view/22813/STMICROELECTRONICS/M24512-RBN6.html 24512 Chip Datasheet here]. In picture, white triangle shows the first pin.
==B Series SoC EEPROM Location==
===LExxB550===
You have to search for eeprom on '''back side''' of mainboard. IC3001 
[[Image:LExxB55x_mainboard_front.JPG|270px|B550 mainboarboard front side]]
[[Image:LE46B550A5W full.jpg|270px|B550 mainboarboard back side]]
[[Image:LExxB550_eeprom.png|270px|B550 eeprom reset. Red line!]]
===LExxB6000===
[[Image:Samsung_UExxB6000_mainboard.jpg|250px|B6000 mainboarboard]]
[[Image:Samsung_UE32_B6000_eeprom_reset.jpg|270px|eeprom location, reset procedure]]

==C Series SoC EEPROM Location==
===LExxC550/530===
[[Image:C550_full.jpg|270px|C550/530 Board]]
[[Image:C550_reset.jpg|200px|C550/530 reset. Red line!]]
 

===LAxxC650===
[[Image:LA40C650full.jpg|150px|LA40C650 Board]]
[[Image:LA40C650_eeprom_is_C.jpg|225px|LA40C650 eeprom`s place]]
[[Image:LA40C650_eeprom_reset.jpg|202px|LA40C650 reset]]
 
===UAxxC6200===
[[Image:UA40C6200_full.jpg|150px|UA40C6200 Board]]
[[Image:UA40C6200_1.jpg|285px|UA40C6200 reset]]
===UExxC7700===
<gallery>
Image:DSC 0272 resized marked.jpg|UE46C7700 Board (back side of mainboard)
Image:DSC 0273 resized.jpg|UE46C7700 eeprom
</gallery>

===OTHER===
please fill up missing models. Thanks!
 

==D Series SoC EEPROM Location==
===D5000===
<gallery>
Image:UE40D5000 Board.JPG|UE40D5000 Board
Image:UE40D5000 EEPROM.JPG|UE40D5000 EEPROM Chip and UnBrick way
</gallery>

===D4003/5003===
<gallery>
Image:UE40D5003_Board.jpg|UE40D5003 Board
Image:UE40D5003_EEprom_reset.jpg|UE40D5003 EEPROM Chip and UnBrick way
</gallery>

===D550===
<gallery>
Image:le32d550_mainboard.jpg|LExxD550 Board
Image:le32d550_eeprom.jpg|LExxD550 EEPROM Chip and UnBrick way
</gallery>

===D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx===
<gallery>
Image:UA40D6000_Board_EEPROM.jpg|UA40D6000 Board
Image:EEPROM_Reset.jpg|UA40D6000 EEPROM Chip and UnBrick way
</gallery>

==BD (BlueRay DVD Player) SoC EEPROM Location==
===BD-D8X00===
<gallery>
Image:Bd-d8900_Board.png|BD-D8900 Board
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

===BD-E8X00===
<gallery>
Image:Bd-e8300_Board.png|BD-D8900 Board
Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

==ES-series SoC EEPROM Location==
This may also be compatible with the "E"-series...
Do check forums for latest info.

===UNxxES7500===
<gallery>
Image:UNxxES7500_Eeprom_location.jpg|UNxxES7500 Board
Image:UNxxES7500_Eeprom.jpg|UNxxES7500 Reset EEPROM
</gallery>

==F series SoC EEPROM location==

===UExxFxxxx===
Applicable for TV models with mainboard: '''BN41-01958A/BN41-01958B''':
 
*UExxF45xx 
*UExxF53xx 
*UExxF55xx 
*UExxF62xx 
*UExxF63xx 
*UExxF64xx 
*UExxF65xx 
*UExxF66xx 
*UExxF68xx 
Main eeprom: IC901 (ATMLH348 or AT24C256). Unbricking possible two ways: Short circuit on RED or BLUE.
<gallery>
Image:UExxFxxx.jpg|BN41-01958A/B
</gallery>

===UExxF8000===
<gallery>
Image:UExxF8000.jpg|UExxF8000
</gallery>

File:UExxFxxx.jpg

2017-01-21T17:42:56Z

Juuso: Juuso uploaded a new version of File:UExxFxxx.jpg

UnBricking TV by EEPROM Reset

2017-01-20T12:30:14Z

Juuso: /* UExxFxxxx */

Here we will show you how to reset your TV by resetting the SoC EEPROM. This can be very useful in case you have bricked your TV by messing with some of its internal settings, which can easily happen if you mess around in the Service Menu. It is highly recommended to take photos of each screen in the service menu, showing your original firmware settings, before changing anything!

=Blind Factory Reset=
Before trying to EEPROM reset, please try a factory reset, that might revive your TV also.

Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter"

[http://www.samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=5306&prd_ia_cd=N0000058&map_seq=31175 Samsung Documentation]

'''This wiki entry will not help resolve a TV bricked by firmware flashing.'''

One example (from the original post of this wiki):
''This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it.
After with help of Juzis we unbricked device with the same way of C series TVs... Here I wanted to try to let
you know how the process is working. Firstly, this hack doesn't work if you bricked you device by
firmware flashing... This hacks just removes service menu settings and let you give another chance
to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like
Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu.
You can also ask help from our forums.''

=EEPROM=
EEPROM is a short of ''electrically erasable programmable read only memory'', which is actually a chip. There are several EEPROM chips used in Samsung TVs. All service menu settings are kept in the so called SoC EEPROM. You can delete and reprogram this chips millions time. So they are fast and reliable...

=Reseting NVRAM (EEPROM)=

For resetting TV, settings, you needed to remove SoC EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of SoC EEPROM. EEPROMs on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.

To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.

Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.

[[File:UE40D5000 RESET MESSAGE.JPG|center|300px| UE40D5000 Reset message]]

=Where do I find the SoC EEPROM chip?=
:Its located near CPU (SoC) at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the [http://pdf1.alldatasheet.com/datasheet-pdf/view/22813/STMICROELECTRONICS/M24512-RBN6.html 24512 Chip Datasheet here]. In picture, white triangle shows the first pin.
==B Series SoC EEPROM Location==
===LExxB550===
You have to search for eeprom on '''back side''' of mainboard. IC3001 
[[Image:LExxB55x_mainboard_front.JPG|270px|B550 mainboarboard front side]]
[[Image:LE46B550A5W full.jpg|270px|B550 mainboarboard back side]]
[[Image:LExxB550_eeprom.png|270px|B550 eeprom reset. Red line!]]
===LExxB6000===
[[Image:Samsung_UExxB6000_mainboard.jpg|250px|B6000 mainboarboard]]
[[Image:Samsung_UE32_B6000_eeprom_reset.jpg|270px|eeprom location, reset procedure]]

==C Series SoC EEPROM Location==
===LExxC550/530===
[[Image:C550_full.jpg|270px|C550/530 Board]]
[[Image:C550_reset.jpg|200px|C550/530 reset. Red line!]]
 

===LAxxC650===
[[Image:LA40C650full.jpg|150px|LA40C650 Board]]
[[Image:LA40C650_eeprom_is_C.jpg|225px|LA40C650 eeprom`s place]]
[[Image:LA40C650_eeprom_reset.jpg|202px|LA40C650 reset]]
 
===UAxxC6200===
[[Image:UA40C6200_full.jpg|150px|UA40C6200 Board]]
[[Image:UA40C6200_1.jpg|285px|UA40C6200 reset]]
===UExxC7700===
<gallery>
Image:DSC 0272 resized marked.jpg|UE46C7700 Board (back side of mainboard)
Image:DSC 0273 resized.jpg|UE46C7700 eeprom
</gallery>

===OTHER===
please fill up missing models. Thanks!
 

==D Series SoC EEPROM Location==
===D5000===
<gallery>
Image:UE40D5000 Board.JPG|UE40D5000 Board
Image:UE40D5000 EEPROM.JPG|UE40D5000 EEPROM Chip and UnBrick way
</gallery>

===D4003/5003===
<gallery>
Image:UE40D5003_Board.jpg|UE40D5003 Board
Image:UE40D5003_EEprom_reset.jpg|UE40D5003 EEPROM Chip and UnBrick way
</gallery>

===D550===
<gallery>
Image:le32d550_mainboard.jpg|LExxD550 Board
Image:le32d550_eeprom.jpg|LExxD550 EEPROM Chip and UnBrick way
</gallery>

===D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx===
<gallery>
Image:UA40D6000_Board_EEPROM.jpg|UA40D6000 Board
Image:EEPROM_Reset.jpg|UA40D6000 EEPROM Chip and UnBrick way
</gallery>

==BD (BlueRay DVD Player) SoC EEPROM Location==
===BD-D8X00===
<gallery>
Image:Bd-d8900_Board.png|BD-D8900 Board
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

===BD-E8X00===
<gallery>
Image:Bd-e8300_Board.png|BD-D8900 Board
Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

==ES-series SoC EEPROM Location==
This may also be compatible with the "E"-series...
Do check forums for latest info.

===UNxxES7500===
<gallery>
Image:UNxxES7500_Eeprom_location.jpg|UNxxES7500 Board
Image:UNxxES7500_Eeprom.jpg|UNxxES7500 Reset EEPROM
</gallery>

==F series SoC EEPROM location==

===UExxFxxxx===
Applicable for TV models with mainboard: '''BN41-01958A/BN41-01958B''':
 
*UExxF45xx 
*UExxF53xx 
*UExxF55xx 
*UExxF62xx 
*UExxF63xx 
*UExxF64xx 
*UExxF65xx 
*UExxF66xx 
*UExxF68xx 
Main eeprom: IC901 (ATMLH348 or AT24C256)
<gallery>
Image:UExxFxxx.jpg|BN41-01958A/B
</gallery>

===UExxF8000===
<gallery>
Image:UExxF8000.jpg|UExxF8000
</gallery>

UnBricking TV by EEPROM Reset

2017-01-20T12:27:57Z

Juuso: /* UExxFxxxx */

Here we will show you how to reset your TV by resetting the SoC EEPROM. This can be very useful in case you have bricked your TV by messing with some of its internal settings, which can easily happen if you mess around in the Service Menu. It is highly recommended to take photos of each screen in the service menu, showing your original firmware settings, before changing anything!

=Blind Factory Reset=
Before trying to EEPROM reset, please try a factory reset, that might revive your TV also.

Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter"

[http://www.samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=5306&prd_ia_cd=N0000058&map_seq=31175 Samsung Documentation]

'''This wiki entry will not help resolve a TV bricked by firmware flashing.'''

One example (from the original post of this wiki):
''This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it.
After with help of Juzis we unbricked device with the same way of C series TVs... Here I wanted to try to let
you know how the process is working. Firstly, this hack doesn't work if you bricked you device by
firmware flashing... This hacks just removes service menu settings and let you give another chance
to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like
Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu.
You can also ask help from our forums.''

=EEPROM=
EEPROM is a short of ''electrically erasable programmable read only memory'', which is actually a chip. There are several EEPROM chips used in Samsung TVs. All service menu settings are kept in the so called SoC EEPROM. You can delete and reprogram this chips millions time. So they are fast and reliable...

=Reseting NVRAM (EEPROM)=

For resetting TV, settings, you needed to remove SoC EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of SoC EEPROM. EEPROMs on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.

To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.

Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.

[[File:UE40D5000 RESET MESSAGE.JPG|center|300px| UE40D5000 Reset message]]

=Where do I find the SoC EEPROM chip?=
:Its located near CPU (SoC) at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the [http://pdf1.alldatasheet.com/datasheet-pdf/view/22813/STMICROELECTRONICS/M24512-RBN6.html 24512 Chip Datasheet here]. In picture, white triangle shows the first pin.
==B Series SoC EEPROM Location==
===LExxB550===
You have to search for eeprom on '''back side''' of mainboard. IC3001 
[[Image:LExxB55x_mainboard_front.JPG|270px|B550 mainboarboard front side]]
[[Image:LE46B550A5W full.jpg|270px|B550 mainboarboard back side]]
[[Image:LExxB550_eeprom.png|270px|B550 eeprom reset. Red line!]]
===LExxB6000===
[[Image:Samsung_UExxB6000_mainboard.jpg|250px|B6000 mainboarboard]]
[[Image:Samsung_UE32_B6000_eeprom_reset.jpg|270px|eeprom location, reset procedure]]

==C Series SoC EEPROM Location==
===LExxC550/530===
[[Image:C550_full.jpg|270px|C550/530 Board]]
[[Image:C550_reset.jpg|200px|C550/530 reset. Red line!]]
 

===LAxxC650===
[[Image:LA40C650full.jpg|150px|LA40C650 Board]]
[[Image:LA40C650_eeprom_is_C.jpg|225px|LA40C650 eeprom`s place]]
[[Image:LA40C650_eeprom_reset.jpg|202px|LA40C650 reset]]
 
===UAxxC6200===
[[Image:UA40C6200_full.jpg|150px|UA40C6200 Board]]
[[Image:UA40C6200_1.jpg|285px|UA40C6200 reset]]
===UExxC7700===
<gallery>
Image:DSC 0272 resized marked.jpg|UE46C7700 Board (back side of mainboard)
Image:DSC 0273 resized.jpg|UE46C7700 eeprom
</gallery>

===OTHER===
please fill up missing models. Thanks!
 

==D Series SoC EEPROM Location==
===D5000===
<gallery>
Image:UE40D5000 Board.JPG|UE40D5000 Board
Image:UE40D5000 EEPROM.JPG|UE40D5000 EEPROM Chip and UnBrick way
</gallery>

===D4003/5003===
<gallery>
Image:UE40D5003_Board.jpg|UE40D5003 Board
Image:UE40D5003_EEprom_reset.jpg|UE40D5003 EEPROM Chip and UnBrick way
</gallery>

===D550===
<gallery>
Image:le32d550_mainboard.jpg|LExxD550 Board
Image:le32d550_eeprom.jpg|LExxD550 EEPROM Chip and UnBrick way
</gallery>

===D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx===
<gallery>
Image:UA40D6000_Board_EEPROM.jpg|UA40D6000 Board
Image:EEPROM_Reset.jpg|UA40D6000 EEPROM Chip and UnBrick way
</gallery>

==BD (BlueRay DVD Player) SoC EEPROM Location==
===BD-D8X00===
<gallery>
Image:Bd-d8900_Board.png|BD-D8900 Board
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

===BD-E8X00===
<gallery>
Image:Bd-e8300_Board.png|BD-D8900 Board
Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

==ES-series SoC EEPROM Location==
This may also be compatible with the "E"-series...
Do check forums for latest info.

===UNxxES7500===
<gallery>
Image:UNxxES7500_Eeprom_location.jpg|UNxxES7500 Board
Image:UNxxES7500_Eeprom.jpg|UNxxES7500 Reset EEPROM
</gallery>

==F series SoC EEPROM location==

===UExxFxxxx===
Applicable for TV models with mainboard: '''BN41-01958A/BN41-01958B'''<>br
UExxF45xx 
UExxF53xx 
UExxF55xx 
UExxF62xx 
UExxF63xx 
UExxF64xx 
UExxF65xx 
UExxF66xx 
UExxF68xx 
Main eeprom: IC901 (ATMLH348 or AT24C256)
<gallery>
Image:UExxFxxx.jpg|UExxFxxxx
</gallery>

===UExxF8000===
<gallery>
Image:UExxF8000.jpg|UExxF8000
</gallery>

UnBricking TV by EEPROM Reset

2017-01-20T12:27:37Z

Juuso: /* F series SoC EEPROM location */

Here we will show you how to reset your TV by resetting the SoC EEPROM. This can be very useful in case you have bricked your TV by messing with some of its internal settings, which can easily happen if you mess around in the Service Menu. It is highly recommended to take photos of each screen in the service menu, showing your original firmware settings, before changing anything!

=Blind Factory Reset=
Before trying to EEPROM reset, please try a factory reset, that might revive your TV also.

Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter"

[http://www.samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=5306&prd_ia_cd=N0000058&map_seq=31175 Samsung Documentation]

'''This wiki entry will not help resolve a TV bricked by firmware flashing.'''

One example (from the original post of this wiki):
''This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it.
After with help of Juzis we unbricked device with the same way of C series TVs... Here I wanted to try to let
you know how the process is working. Firstly, this hack doesn't work if you bricked you device by
firmware flashing... This hacks just removes service menu settings and let you give another chance
to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like
Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu.
You can also ask help from our forums.''

=EEPROM=
EEPROM is a short of ''electrically erasable programmable read only memory'', which is actually a chip. There are several EEPROM chips used in Samsung TVs. All service menu settings are kept in the so called SoC EEPROM. You can delete and reprogram this chips millions time. So they are fast and reliable...

=Reseting NVRAM (EEPROM)=

For resetting TV, settings, you needed to remove SoC EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of SoC EEPROM. EEPROMs on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.

To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.

Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.

[[File:UE40D5000 RESET MESSAGE.JPG|center|300px| UE40D5000 Reset message]]

=Where do I find the SoC EEPROM chip?=
:Its located near CPU (SoC) at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the [http://pdf1.alldatasheet.com/datasheet-pdf/view/22813/STMICROELECTRONICS/M24512-RBN6.html 24512 Chip Datasheet here]. In picture, white triangle shows the first pin.
==B Series SoC EEPROM Location==
===LExxB550===
You have to search for eeprom on '''back side''' of mainboard. IC3001 
[[Image:LExxB55x_mainboard_front.JPG|270px|B550 mainboarboard front side]]
[[Image:LE46B550A5W full.jpg|270px|B550 mainboarboard back side]]
[[Image:LExxB550_eeprom.png|270px|B550 eeprom reset. Red line!]]
===LExxB6000===
[[Image:Samsung_UExxB6000_mainboard.jpg|250px|B6000 mainboarboard]]
[[Image:Samsung_UE32_B6000_eeprom_reset.jpg|270px|eeprom location, reset procedure]]

==C Series SoC EEPROM Location==
===LExxC550/530===
[[Image:C550_full.jpg|270px|C550/530 Board]]
[[Image:C550_reset.jpg|200px|C550/530 reset. Red line!]]
 

===LAxxC650===
[[Image:LA40C650full.jpg|150px|LA40C650 Board]]
[[Image:LA40C650_eeprom_is_C.jpg|225px|LA40C650 eeprom`s place]]
[[Image:LA40C650_eeprom_reset.jpg|202px|LA40C650 reset]]
 
===UAxxC6200===
[[Image:UA40C6200_full.jpg|150px|UA40C6200 Board]]
[[Image:UA40C6200_1.jpg|285px|UA40C6200 reset]]
===UExxC7700===
<gallery>
Image:DSC 0272 resized marked.jpg|UE46C7700 Board (back side of mainboard)
Image:DSC 0273 resized.jpg|UE46C7700 eeprom
</gallery>

===OTHER===
please fill up missing models. Thanks!
 

==D Series SoC EEPROM Location==
===D5000===
<gallery>
Image:UE40D5000 Board.JPG|UE40D5000 Board
Image:UE40D5000 EEPROM.JPG|UE40D5000 EEPROM Chip and UnBrick way
</gallery>

===D4003/5003===
<gallery>
Image:UE40D5003_Board.jpg|UE40D5003 Board
Image:UE40D5003_EEprom_reset.jpg|UE40D5003 EEPROM Chip and UnBrick way
</gallery>

===D550===
<gallery>
Image:le32d550_mainboard.jpg|LExxD550 Board
Image:le32d550_eeprom.jpg|LExxD550 EEPROM Chip and UnBrick way
</gallery>

===D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx===
<gallery>
Image:UA40D6000_Board_EEPROM.jpg|UA40D6000 Board
Image:EEPROM_Reset.jpg|UA40D6000 EEPROM Chip and UnBrick way
</gallery>

==BD (BlueRay DVD Player) SoC EEPROM Location==
===BD-D8X00===
<gallery>
Image:Bd-d8900_Board.png|BD-D8900 Board
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

===BD-E8X00===
<gallery>
Image:Bd-e8300_Board.png|BD-D8900 Board
Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

==ES-series SoC EEPROM Location==
This may also be compatible with the "E"-series...
Do check forums for latest info.

===UNxxES7500===
<gallery>
Image:UNxxES7500_Eeprom_location.jpg|UNxxES7500 Board
Image:UNxxES7500_Eeprom.jpg|UNxxES7500 Reset EEPROM
</gallery>

==F series SoC EEPROM location==

===UExxFxxxx===
Applicable for TV models with mainboard: '''BN41-01958A/BN41-01958B'''
UExxF45xx 
UExxF53xx 
UExxF55xx 
UExxF62xx 
UExxF63xx 
UExxF64xx 
UExxF65xx 
UExxF66xx 
UExxF68xx 
Main eeprom: IC901 (ATMLH348 or AT24C256)
<gallery>
Image:UExxFxxx.jpg|UExxFxxxx
</gallery>

===UExxF8000===
<gallery>
Image:UExxF8000.jpg|UExxF8000
</gallery>

UnBricking TV by EEPROM Reset

2017-01-20T11:57:50Z

Juuso: /* UExxF6xxx */

Here we will show you how to reset your TV by resetting the SoC EEPROM. This can be very useful in case you have bricked your TV by messing with some of its internal settings, which can easily happen if you mess around in the Service Menu. It is highly recommended to take photos of each screen in the service menu, showing your original firmware settings, before changing anything!

=Blind Factory Reset=
Before trying to EEPROM reset, please try a factory reset, that might revive your TV also.

Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter"

[http://www.samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=5306&prd_ia_cd=N0000058&map_seq=31175 Samsung Documentation]

'''This wiki entry will not help resolve a TV bricked by firmware flashing.'''

One example (from the original post of this wiki):
''This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it.
After with help of Juzis we unbricked device with the same way of C series TVs... Here I wanted to try to let
you know how the process is working. Firstly, this hack doesn't work if you bricked you device by
firmware flashing... This hacks just removes service menu settings and let you give another chance
to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like
Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu.
You can also ask help from our forums.''

=EEPROM=
EEPROM is a short of ''electrically erasable programmable read only memory'', which is actually a chip. There are several EEPROM chips used in Samsung TVs. All service menu settings are kept in the so called SoC EEPROM. You can delete and reprogram this chips millions time. So they are fast and reliable...

=Reseting NVRAM (EEPROM)=

For resetting TV, settings, you needed to remove SoC EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of SoC EEPROM. EEPROMs on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.

To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.

Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.

[[File:UE40D5000 RESET MESSAGE.JPG|center|300px| UE40D5000 Reset message]]

=Where do I find the SoC EEPROM chip?=
:Its located near CPU (SoC) at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the [http://pdf1.alldatasheet.com/datasheet-pdf/view/22813/STMICROELECTRONICS/M24512-RBN6.html 24512 Chip Datasheet here]. In picture, white triangle shows the first pin.
==B Series SoC EEPROM Location==
===LExxB550===
You have to search for eeprom on '''back side''' of mainboard. IC3001 
[[Image:LExxB55x_mainboard_front.JPG|270px|B550 mainboarboard front side]]
[[Image:LE46B550A5W full.jpg|270px|B550 mainboarboard back side]]
[[Image:LExxB550_eeprom.png|270px|B550 eeprom reset. Red line!]]
===LExxB6000===
[[Image:Samsung_UExxB6000_mainboard.jpg|250px|B6000 mainboarboard]]
[[Image:Samsung_UE32_B6000_eeprom_reset.jpg|270px|eeprom location, reset procedure]]

==C Series SoC EEPROM Location==
===LExxC550/530===
[[Image:C550_full.jpg|270px|C550/530 Board]]
[[Image:C550_reset.jpg|200px|C550/530 reset. Red line!]]
 

===LAxxC650===
[[Image:LA40C650full.jpg|150px|LA40C650 Board]]
[[Image:LA40C650_eeprom_is_C.jpg|225px|LA40C650 eeprom`s place]]
[[Image:LA40C650_eeprom_reset.jpg|202px|LA40C650 reset]]
 
===UAxxC6200===
[[Image:UA40C6200_full.jpg|150px|UA40C6200 Board]]
[[Image:UA40C6200_1.jpg|285px|UA40C6200 reset]]
===UExxC7700===
<gallery>
Image:DSC 0272 resized marked.jpg|UE46C7700 Board (back side of mainboard)
Image:DSC 0273 resized.jpg|UE46C7700 eeprom
</gallery>

===OTHER===
please fill up missing models. Thanks!
 

==D Series SoC EEPROM Location==
===D5000===
<gallery>
Image:UE40D5000 Board.JPG|UE40D5000 Board
Image:UE40D5000 EEPROM.JPG|UE40D5000 EEPROM Chip and UnBrick way
</gallery>

===D4003/5003===
<gallery>
Image:UE40D5003_Board.jpg|UE40D5003 Board
Image:UE40D5003_EEprom_reset.jpg|UE40D5003 EEPROM Chip and UnBrick way
</gallery>

===D550===
<gallery>
Image:le32d550_mainboard.jpg|LExxD550 Board
Image:le32d550_eeprom.jpg|LExxD550 EEPROM Chip and UnBrick way
</gallery>

===D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx===
<gallery>
Image:UA40D6000_Board_EEPROM.jpg|UA40D6000 Board
Image:EEPROM_Reset.jpg|UA40D6000 EEPROM Chip and UnBrick way
</gallery>

==BD (BlueRay DVD Player) SoC EEPROM Location==
===BD-D8X00===
<gallery>
Image:Bd-d8900_Board.png|BD-D8900 Board
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

===BD-E8X00===
<gallery>
Image:Bd-e8300_Board.png|BD-D8900 Board
Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

==ES-series SoC EEPROM Location==
This may also be compatible with the "E"-series...
Do check forums for latest info.

===UNxxES7500===
<gallery>
Image:UNxxES7500_Eeprom_location.jpg|UNxxES7500 Board
Image:UNxxES7500_Eeprom.jpg|UNxxES7500 Reset EEPROM
</gallery>

==F series SoC EEPROM location==

===UExxF6xxx===
Mainboard: BN41-01958A/BN41-01958B
<gallery>
Image:UExxFxxx.jpg|UExxFxxxx
</gallery>

===UExxF8000===
<gallery>
Image:UExxF8000.jpg|UExxF8000
</gallery>

File:UExxFxxx.jpg

2017-01-20T11:55:47Z

Juuso:

UnBricking TV by EEPROM Reset

2017-01-20T11:53:06Z

Juuso: /* F series SoC EEPROM location */

Here we will show you how to reset your TV by resetting the SoC EEPROM. This can be very useful in case you have bricked your TV by messing with some of its internal settings, which can easily happen if you mess around in the Service Menu. It is highly recommended to take photos of each screen in the service menu, showing your original firmware settings, before changing anything!

=Blind Factory Reset=
Before trying to EEPROM reset, please try a factory reset, that might revive your TV also.

Press "EXIT" button for 12 seconds (15 is better since you cannot see TV), than press "Left" and "Enter"

[http://www.samsung.com/us/support/supportOwnersHowToGuidePopup.do?howto_guide_seq=5306&prd_ia_cd=N0000058&map_seq=31175 Samsung Documentation]

'''This wiki entry will not help resolve a TV bricked by firmware flashing.'''

One example (from the original post of this wiki):
''This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it.
After with help of Juzis we unbricked device with the same way of C series TVs... Here I wanted to try to let
you know how the process is working. Firstly, this hack doesn't work if you bricked you device by
firmware flashing... This hacks just removes service menu settings and let you give another chance
to fix settings... Also you needed to find correct values for your TV after resetting NVRAM like
Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu.
You can also ask help from our forums.''

=EEPROM=
EEPROM is a short of ''electrically erasable programmable read only memory'', which is actually a chip. There are several EEPROM chips used in Samsung TVs. All service menu settings are kept in the so called SoC EEPROM. You can delete and reprogram this chips millions time. So they are fast and reliable...

=Reseting NVRAM (EEPROM)=

For resetting TV, settings, you needed to remove SoC EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of SoC EEPROM. EEPROMs on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.

To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.

Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.

[[File:UE40D5000 RESET MESSAGE.JPG|center|300px| UE40D5000 Reset message]]

=Where do I find the SoC EEPROM chip?=
:Its located near CPU (SoC) at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the [http://pdf1.alldatasheet.com/datasheet-pdf/view/22813/STMICROELECTRONICS/M24512-RBN6.html 24512 Chip Datasheet here]. In picture, white triangle shows the first pin.
==B Series SoC EEPROM Location==
===LExxB550===
You have to search for eeprom on '''back side''' of mainboard. IC3001 
[[Image:LExxB55x_mainboard_front.JPG|270px|B550 mainboarboard front side]]
[[Image:LE46B550A5W full.jpg|270px|B550 mainboarboard back side]]
[[Image:LExxB550_eeprom.png|270px|B550 eeprom reset. Red line!]]
===LExxB6000===
[[Image:Samsung_UExxB6000_mainboard.jpg|250px|B6000 mainboarboard]]
[[Image:Samsung_UE32_B6000_eeprom_reset.jpg|270px|eeprom location, reset procedure]]

==C Series SoC EEPROM Location==
===LExxC550/530===
[[Image:C550_full.jpg|270px|C550/530 Board]]
[[Image:C550_reset.jpg|200px|C550/530 reset. Red line!]]
 

===LAxxC650===
[[Image:LA40C650full.jpg|150px|LA40C650 Board]]
[[Image:LA40C650_eeprom_is_C.jpg|225px|LA40C650 eeprom`s place]]
[[Image:LA40C650_eeprom_reset.jpg|202px|LA40C650 reset]]
 
===UAxxC6200===
[[Image:UA40C6200_full.jpg|150px|UA40C6200 Board]]
[[Image:UA40C6200_1.jpg|285px|UA40C6200 reset]]
===UExxC7700===
<gallery>
Image:DSC 0272 resized marked.jpg|UE46C7700 Board (back side of mainboard)
Image:DSC 0273 resized.jpg|UE46C7700 eeprom
</gallery>

===OTHER===
please fill up missing models. Thanks!
 

==D Series SoC EEPROM Location==
===D5000===
<gallery>
Image:UE40D5000 Board.JPG|UE40D5000 Board
Image:UE40D5000 EEPROM.JPG|UE40D5000 EEPROM Chip and UnBrick way
</gallery>

===D4003/5003===
<gallery>
Image:UE40D5003_Board.jpg|UE40D5003 Board
Image:UE40D5003_EEprom_reset.jpg|UE40D5003 EEPROM Chip and UnBrick way
</gallery>

===D550===
<gallery>
Image:le32d550_mainboard.jpg|LExxD550 Board
Image:le32d550_eeprom.jpg|LExxD550 EEPROM Chip and UnBrick way
</gallery>

===D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx===
<gallery>
Image:UA40D6000_Board_EEPROM.jpg|UA40D6000 Board
Image:EEPROM_Reset.jpg|UA40D6000 EEPROM Chip and UnBrick way
</gallery>

==BD (BlueRay DVD Player) SoC EEPROM Location==
===BD-D8X00===
<gallery>
Image:Bd-d8900_Board.png|BD-D8900 Board
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

===BD-E8X00===
<gallery>
Image:Bd-e8300_Board.png|BD-D8900 Board
Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way
</gallery>

==ES-series SoC EEPROM Location==
This may also be compatible with the "E"-series...
Do check forums for latest info.

===UNxxES7500===
<gallery>
Image:UNxxES7500_Eeprom_location.jpg|UNxxES7500 Board
Image:UNxxES7500_Eeprom.jpg|UNxxES7500 Reset EEPROM
</gallery>

==F series SoC EEPROM location==

===UExxF6xxx===
Mainboard: BN41-01958A/BN41-01958B
<gallery>
Image:UExxF6xxx.jpg|UExxF6xxx
</gallery>
===UExxF8000===
<gallery>
Image:UExxF8000.jpg|UExxF8000
</gallery>

Hacking C-Series TV with Internet@TV only

2017-01-20T07:54:35Z

Juuso: fixed download links. Do not trust external sources!

Thanks to [http://forum.samygo.tv/viewtopic.php?p=9515#p9515 dredkin] there now is a simple method of gaining root access on TVs equipped with the Internet@TV feature. '''It works up to firmware version T-VALDEUC 3005.1 but it does not work with 3006.2 and 3007.1 anymore.'''

== On your PC... ==
* Download "widget.zip" [http://forum.samygo.tv/download/file.php?id=8829 here]
* Extract "widget.zip" to root directory of your system drive (for example: C:\ )
* Edit "c:\widget\www\widgetlist.xml" to change IP address to address of your PC
* Run "http.exe"
<hr>
The Dredkin`s widget (only widget, no script or http.exe) is [http://dl.dropbox.com/u/55342321/dredkin_widget.zip here] or [http://forum.samygo.tv/download/file.php?id=8831 here].

== On your TV... ==
{{#ev:youtube|i7-HD9Uz40k| |right|C series widget hack.}}
* Start Internet@TV and create user "develop"
* Log in with that user, choose "Settings", choose "Development" and enter your computers IP address as the server address
* Run widget and press "Hack your TV"
* Exit Internet@TV and turn off TV

P.S.: You can skip setting up a server on your PC, use IP: 188.126.44.135 and you get your widget ;)

== On your USB stick... ==
* Format USB stick with FAT32 or NTFS
* Download [http://download.samygo.tv/SamyGO%20Extensions%20Packs/ SamyGO Extension Pack] and extract to root directory (choose the right pack matching your TV's firmware, for example: T-VALDEUC)
* Download [http://forum.samygo.tv/download/file.php?id=8830 run_sh.zip] and extract to root directory

== Starting the SamyGO Extensions... ==
Turn on TV and plug USB stick, then wait for the message box to disappear, wait some more time (~20 seconds), then try to login via SSH.
IP: You must know it
User: "root"
Pass: "SamyGO")
You can use [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY] for this.
If it does not work, the file "rcSGO_out" on your USB stick could help identifying the problem.

== Mounting NFS shares... ==
In this example a folder "share" is created on the USB stick. Then a NFS share called "videos" is mounted to it. You must know the IP address where the NFS share is located.
mkdir /dtv/usb/sda1/share
/bin/mount -o nolock <IP>:/videos /dtv/usb/sda1/share -t nfs
Linux supports NFS by default, Windows does'nt. For evaluation purposes you might try [http://www.hanewin.de/nfs-d.htm Hanewin NFS Server], it will work for 30 days as a trial.

== Things to keep in mind ==
* When editing scripts, '''always make sure line breaks are done with unix style "LF", NOT Windows' "CRLF"'''!

----
Referenced topic: http://forum.samygo.tv/viewtopic.php?f=10&t=11501

Hacking C-Series TV with Internet@TV only

2017-01-19T19:54:11Z

Juuso:

Thanks to [http://forum.samygo.tv/viewtopic.php?p=9515#p9515 dredkin] there now is a simple method of gaining root access on TVs equipped with the Internet@TV feature. '''It works up to firmware version T-VALDEUC 3005.1 but it does not work with 3006.2 and 3007.1 anymore.'''

== On your PC... ==
* Download "widget.zip" [http://www.multiupload.com/OLQTLJ8G52 here]
* Extract "widget.zip" to root directory of your system drive (for example: C:\ )
* Edit "c:\widget\www\widgetlist.xml" to change IP address to address of your PC
* Run "http.exe"
<hr>
The Dredkin`s widget (only widget, no script or http.exe) is [http://dl.dropbox.com/u/55342321/dredkin_widget.zip here].

== On your TV... ==
{{#ev:youtube|i7-HD9Uz40k| |right|C series widget hack.}}
* Start Internet@TV and create user "develop"
* Log in with that user, choose "Settings", choose "Development" and enter your computers IP address as the server address
* Run widget and press "Hack your TV"
* Exit Internet@TV and turn off TV

P.S.: You can skip setting up a server on your PC, use IP: 188.126.44.135 and you get your widget ;)

== On your USB stick... ==
* Format USB stick with FAT32 or NTFS
* Download [http://download.samygo.tv/SamyGO%20Extensions%20Packs/ SamyGO Extension Pack] and extract to root directory (choose the right pack matching your TV's firmware, for example: T-VALDEUC)
* Download [http://www.multiupload.com/C3QZ01OR8Q run_sh.zip] and extract to root directory

== Starting the SamyGO Extensions... ==
Turn on TV and plug USB stick, then wait for the message box to disappear, wait some more time (~20 seconds), then try to login via SSH.
IP: You must know it
User: "root"
Pass: "SamyGO")
You can use [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY] for this.
If it does not work, the file "rcSGO_out" on your USB stick could help identifying the problem.

== Mounting NFS shares... ==
In this example a folder "share" is created on the USB stick. Then a NFS share called "videos" is mounted to it. You must know the IP address where the NFS share is located.
mkdir /dtv/usb/sda1/share
/bin/mount -o nolock <IP>:/videos /dtv/usb/sda1/share -t nfs
Linux supports NFS by default, Windows does'nt. For evaluation purposes you might try [http://www.hanewin.de/nfs-d.htm Hanewin NFS Server], it will work for 30 days as a trial.

== Things to keep in mind ==
* When editing scripts, '''always make sure line breaks are done with unix style "LF", NOT Windows' "CRLF"'''!

----
Referenced topic: http://forum.samygo.tv/viewtopic.php?f=10&t=11501

Hacking C-Series TV with Internet@TV only

2017-01-19T18:54:45Z

Juuso:

Thanks to [http://forum.samygo.tv/viewtopic.php?p=9515#p9515 dredkin] there now is a simple method of gaining root access on TVs equipped with the Internet@TV feature. '''It works up to firmware version T-VALDEUC 3005.1 but it does not work with 3006.2 and 3007.1 anymore.'''

== On your PC... ==
* Download "widget.zip" [http://www.multiupload.com/OLQTLJ8G52 here]
* Extract "widget.zip" to root directory of your system drive (for example: C:\ )
* Edit "c:\widget\www\widgetlist.xml" to change IP address to address of your PC
* Run "http.exe"
<hr>
The Dredkin`s widget (only widget, no script or http.exe) is [http://dl.dropbox.com/u/55342321/dredkin_widget.zip here].

== On your TV... ==
{{#ev:youtube|i7-HD9Uz40k| |right|C series widget hack.}}
* Start Internet@TV and create user "develop"
* Log in with that user, choose "Settings", choose "Development" and enter your computers IP address as the server address
* Run widget and press "Hack your TV"
* Exit Internet@TV and turn off TV

P.S.: You can skip setting up a server on your PC, use IP: 188.126.44.135 and you get your widget ;)

== On your USB stick... ==
* Format USB stick with FAT32 or NTFS
* Download [http://download.samygo.tv/SamyGO%20Extensions%20Packs/ SamyGO Extension Pack] and extract to root directory (choose the right pack matching your TV's firmware, for example: T-VALDEUC)
* Download [http://www.multiupload.com/C3QZ01OR8Q run_sh.zip] and extract to root directory

== Starting the SamyGO Extensions... ==
Turn on TV and plug USB stick, then wait for the message box to disappear, wait some more time (~20 seconds), then try to login via SSH.
IP: You must know it
User: "root"
Pass: "SamyGO")
You can use [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY] for this.
If it does not work, the file "rcSGO_out" on your USB stick could help identifying the problem.

== Mounting NFS shares... ==
In this example a folder "share" is created on the USB stick. Then a NFS share called "videos" is mounted to it. You must know the IP address where the NFS share is located.
mkdir /dtv/usb/sda1/share
/bin/mount -o nolock <IP>:/videos /dtv/usb/sda1/share -t nfs
Linux supports NFS by default, Windows does'nt. For evaluation purposes you might try [http://www.hanewin.de/nfs-d.htm Hanewin NFS Server], it will work for 30 days as a trial.

== Things to keep in mind ==
* When editing scripts, '''always make sure line breaks are done with unix style "LF", NOT Windows' "CRLF"'''!

----
Referenced topic: http://forum.samygo.tv/viewtopic.php?f=13&t=974&start=290

File:Server ip.png

2017-01-11T16:46:11Z

Juuso: Juuso uploaded a new version of File:Server ip.png

The K Series Wiki

2016-08-25T07:58:31Z

Juuso: Innitial page

*UNDER CONSTRUCTION

To be updated...

MediaWiki:Sidebar

2016-08-25T07:20:46Z

Juuso: Add K series wiki link to sidebar.

MediaWiki:Sidebar

2016-08-25T07:19:01Z

Juuso: Add K series wiki link to sidebar.

How to send FACTORY+3SPEED keys

2016-08-16T13:09:54Z

Juuso:

Here are known several ways how to send IR codes (most required to unlock Extended service menu options) to TV. 
You don`t need to use all described methods, it is enough to have one which works on your TV keeping in mind we need to send custom codes rare, most cases only once while unlocking PVR [http://wiki.samygo.tv/index.php5/Activating_PVR_on_D5500] or GuidePlus [http://wiki.samygo.tv/index.php5/Enabling_the_PVR_for_C-Series], change your Internet@TV region [http://wiki.samygo.tv/index.php5/How_to_change_your_Internet@TV_region], change model to get extra functionality on low end cheap C and D series TV`s [http://wiki.samygo.tv/index.php5/Enabling_Video_playback_on_C350], Enable MHP [http://wiki.samygo.tv/index.php5/How_to_enable_MHP_for_C-Series], enable Internet@tv in UC6000 T-valdeuc Tvs [http://wiki.samygo.tv/index.php5/How_to_enable_Internet@tv_in_UC6000_T-valdeuc_Tvs] or change locked by default other service menu options on C/D/E series TV`s and BD players...
 
All methods are cross-compatible, because the goal is to get Extended Service Menu, desn`t matter which way to use for that. In all cases (except switching on to hotel mode on C series), it is needed to send two codes to TV, FACTORY and 3SPEED '''while being in service menu'''. 
 
'''CAUTION!''', the danger to brick TV is high. You can harm your TV by changing values in service menu. Be 100% sure what you`re doing there. 
[[File:Servicemenu.jpg]] 

=Send IR using your phone=

==Android smartphones with built-in IR port==
[[File:SRC.png|150px|thumb|right]]
==='''{{red | Recommended!}}''' Service Remote Control Samsung-TV '''(SRC)'''===

This is easiest and [[How_to_send_FACTORY%2B3SPEED_keys#Recommended.21_Service_Remote_Control_Samsung-TV_.28SRC.29|recommended]] way to access Extended Service Menu for most samsung TV`s.
[https://forum.samygo.tv/download/file.php?id=8299 '''Direct download SRC here''']
*Unzip downloaded zip archive
*Install 'com.wolf.servicercsam.downloader.apk' on your phone.
*Run SRC app and use S1, S2, S3 keys to send Info, Factory and 3Speed codes as required.
S1 - INFO
S2 - FACTORY
S3 - 3SPEED
*More information on forum: http://forum.samygo.tv/viewtopic.php?f=74&t=10405#p88075
App is also available on [https://play.google.com/store/apps/details?id=com.wolf.servicercsam google play].

===Universal Remote app===
We will use next buttons for our goal:
Play - FACTORY
Pause - 3SPEED

::Suitable models::
*Samsung galaxy series with built in IR: '''[https://play.google.com/store/apps/details?id=remote.control.samsung Samsung IR - Universal Remote]'''(free version) or [https://play.google.com/store/apps/details?id=remote.control.samsungpro Pro version]
*HTC phones with built in IR blaster: '''[https://play.google.com/store/apps/details?id=com.htc.sample.ir HTC IR - Universal Remote]'''
*Other devices: for more info check '''http://www.power7.net/'''
====Setup your controls====
*Install and start '''Universal Remote''' (see above).(pic 1).
*Scroll down and open RED labeled '''{{red | My Remote Control 1 (TV)}}''' (pic 2), you will see buttons (pic 3).
:::('''NB!''' {{red|Do not use}} '''Remote GUI 1''' from menu at the top right corner neither "My IR REMOTE GUI", nor any other option like "My Remote Control 1 (TV) GUI" which is in cyan color, which brings you to real-remote like view as you have now! Do not use any button where is "GUI" in the name :))
*Scroll down and you will notice input fields beginning with ''Insert IR code string for...'' and button name.(pic 4).
*scroll even down and find ''Insert IR code string for Play...'' and replace the code which exists there to the hex code of FACTORY (pic5):
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689</pre>
*find ''Insert IR code string for Pause'' and replace to hex code for 3SPEED:
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689
</pre>
*Navigate to the bottom and hit ''Save the IR codes'' and exit setup (with return)(pic 6).

====Sending custom key codes====
Click on '''My Remote Control TV 1 GUI''' (cyan color)(pic 7).
*Press Play and/or Pause (or your combinations) when required to send FACTORY and 3SPEED codes (pic 8).
Screenshots:
<gallery>
Image:SamsungIR-1.png|pic 1.
Image:SamsungIR-2.png|pic 2.
Image:SamsungIR-3.png|pic 3.
Image:SamsungIR-4.png|pic 4.
Image:SamsungIR-5.png|pic 5.
Image:SamsungIR-6.png|pic 6.
Image:SamsungIR-7.png|pic 7.
Image:SamsungIR-8.png|pic 8.
</gallery>
==Symbian based phones==
Example with symbian based phone containing IR (infrared) port on board (Nokia N93, E51 etc). 
The phone '''must''' be rooted. 
Install '''Psiloc.irRemote.v1.04.sis''' and start it. The app you can easy find on the internet. 
Choose the '''AA59-00316b''' remote config and test it on your TV. 
Download '''Samsung Service_Remote''' using gprs (or wifi if exists) from applications internet server. Choose this config (the author is [http://forum.samygo.tv/memberlist.php?mode=viewprofile&u=10547 Gia90]) 
Now you have service codes: 7 for 3SPEED and 9 for FACTORY 

=samyGOrc (Rooted E/F ONLY)=
Root is mandatory, it means you need to have SamyGO already installed and wait for it to load in the background after opening Service Menu (about 1 minute until you gain FTP and Telnet access to TV)
: 1. Download and extract [http://forum.samygo.tv/download/file.php?id=3597 samyGOrc-v1.0.zip]
: 2. Connect to TV by FTP and copy extracted '''samyGOrc''' file to '''/mnt/opt/privateer/usr/bin'''
: 3. Telnet to TV and set file permissions
: <pre>chmod 755 /mnt/opt/privateer/usr/bin/samyGOrc</pre>
Steps above won't be necessary anymore if ever you need to use again this method, and might not be necessary at all on F where samyGOrc should be available by default. Now samyGOrc is installed and has execute rights. Only next step should be enough then.
: 4. Telnet to TV command to send consecutively FACTORY (=59) and 3SPEED (=60) keys
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 59; samyGOrc -p $(pidof exeTV || pidof exeDSP) 60</pre>
On the same principle, it's also possible to directly access ''extended'' service menu from "normal" TV state (TV ON, not already in service menu) by sending INFO (=31) + FACTORY (=59) keys (equivalent to INFO+MENU+MUTE+POWER from TV OFF then FACTORY+3SPEED) the same way. In order to achieve this, Telnet command:
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 31; samyGOrc -p $(pidof exeTV || pidof exeDSP) 59</pre>
This latest command could possibly allow access to ''extended'' service menu on some rooted '''E/F Bluray players''' as well.

=ruSamsungTVCommunicator (ruSTVC)=
[[File:RuSamsungTVCommunicator.png|right|350px|ruSamsungTVCommunicator]]
Software way and easiest way to reach your goal. This only works on TV`s with ethernet/wifi port and on models where the network remote control function isn`t disabled (all high end C, D and E series). However, it doesn't work any longer on most recent models/firmwares. 
1. Download the application from [http://samsung.rainerullrich.de author`s page]. 
2. Start ruSTVC on PC, and when asked, enable access to control TV on TV screen. If no popup appeared, navigate to 
Menu->System->Network Remote Control ->ruSTVC
and set ''allow'' 
3. Power off TV, enter to service menu (INFO MENU MUTE POWER on your RC) 
4. Press FACTORY and after this 3SPEED buttons on ruSTVC application. 
 
=Arduino project '''Ethernet to IR'''=
* '''[[Ethernet to IR and Serial Console Interface]]'''
 

=Original SamsungTV Factory Remote=
[[File:AA8100243A.png|Samsung Factory remote controller|50px|right]]
 
The part number of this remote is: '''AA8100243A''' 
This way to send Factory codes to TV is quite expensive, because the cost of this remote is 21-80$ on different internet stores. 
BTW we don`t know if it able to send 3SPEED code, because this button is missing.
Needed anyone who could confirm. 
 

=Programable universal remotes=
If you have programable RC like '''"One For All" URC-7320''' or similar, you also can send required codes to TV.
 

=Build your own IR transmitter=
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]'''

=IR blaster=
Many high-end TVs come bundled with an IR blaster, its use is similar to own built IR transmitter [http://wiki.samygo.tv/index.php5/Change_region_(Local_Set)_on_F_series]

 
 
=References=
 
 

--[[User:Zoelechat|Zoelechat]] ([[User talk:Zoelechat|talk]]) 19:30, 20 December 2014 (UTC)
--[[User:Juuso|Juuso]] ([[User talk:Juuso|talk]]) 12:51, 16 August 2016 (UTC)

How to send FACTORY+3SPEED keys

2016-08-16T13:08:22Z

Juuso: /* {{red | Recommended!}} Service Remote Control Samsung-TV (SRC) */ some housekeeping

Here are known several ways how to send IR codes (most required to unlock Extended service menu options) to TV. 
You don`t need to use all described methods, it is enough to have one which works on your TV keeping in mind we need to send custom codes rare, most cases only once while unlocking PVR [http://wiki.samygo.tv/index.php5/Activating_PVR_on_D5500] or GuidePlus [http://wiki.samygo.tv/index.php5/Enabling_the_PVR_for_C-Series], change your Internet@TV region [http://wiki.samygo.tv/index.php5/How_to_change_your_Internet@TV_region], change model to get extra functionality on low end cheap C and D series TV`s [http://wiki.samygo.tv/index.php5/Enabling_Video_playback_on_C350], Enable MHP [http://wiki.samygo.tv/index.php5/How_to_enable_MHP_for_C-Series], enable Internet@tv in UC6000 T-valdeuc Tvs [http://wiki.samygo.tv/index.php5/How_to_enable_Internet@tv_in_UC6000_T-valdeuc_Tvs] or change locked by default other service menu options on C/D/E series TV`s and BD players...
 
All methods are cross-compatible, because the goal is to get Extended Service Menu, desn`t matter which way to use for that. In all cases (except switching on to hotel mode on C series), it is needed to send two codes to TV, FACTORY and 3SPEED '''while being in service menu'''. 
 
'''CAUTION!''', the danger to brick TV is high. You can harm your TV by changing values in service menu. Be 100% sure what you`re doing there. 
[[File:Servicemenu.jpg]] 

=Send IR using your phone=

==Android smartphones with built-in IR port==

==='''{{red | Recommended!}}''' Service Remote Control Samsung-TV '''(SRC)'''=== [[File:SRC.png|150px|thumb|right]]

This is easiest and [[How_to_send_FACTORY%2B3SPEED_keys#Recommended.21_Service_Remote_Control_Samsung-TV_.28SRC.29|recommended]] way to access Extended Service Menu for most samsung TV`s.
[https://forum.samygo.tv/download/file.php?id=8299 '''Direct download SRC here''']
*Unzip downloaded zip archive
*Install 'com.wolf.servicercsam.downloader.apk' on your phone.
*Run SRC app and use S1, S2, S3 keys to send Info, Factory and 3Speed codes as required.
S1 - INFO
S2 - FACTORY
S3 - 3SPEED
*More information on forum: http://forum.samygo.tv/viewtopic.php?f=74&t=10405#p88075
App is also available on [https://play.google.com/store/apps/details?id=com.wolf.servicercsam google play].

==='''Universal Remote app'''===
We will use next buttons for our goal:
Play - FACTORY
Pause - 3SPEED

::Suitable models::
*Samsung galaxy series with built in IR: '''[https://play.google.com/store/apps/details?id=remote.control.samsung Samsung IR - Universal Remote]'''(free version) or [https://play.google.com/store/apps/details?id=remote.control.samsungpro Pro version]
*HTC phones with built in IR blaster: '''[https://play.google.com/store/apps/details?id=com.htc.sample.ir HTC IR - Universal Remote]'''
*Other devices: for more info check '''http://www.power7.net/'''
====Setup your controls====
*Install and start '''Universal Remote''' (see above).(pic 1).
*Scroll down and open RED labeled '''{{red | My Remote Control 1 (TV)}}''' (pic 2), you will see buttons (pic 3).
:::('''NB!''' {{red|Do not use}} '''Remote GUI 1''' from menu at the top right corner neither "My IR REMOTE GUI", nor any other option like "My Remote Control 1 (TV) GUI" which is in cyan color, which brings you to real-remote like view as you have now! Do not use any button where is "GUI" in the name :))
*Scroll down and you will notice input fields beginning with ''Insert IR code string for...'' and button name.(pic 4).
*scroll even down and find ''Insert IR code string for Play...'' and replace the code which exists there to the hex code of FACTORY (pic5):
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689</pre>
*find ''Insert IR code string for Pause'' and replace to hex code for 3SPEED:
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689
</pre>
*Navigate to the bottom and hit ''Save the IR codes'' and exit setup (with return)(pic 6).

====Sending custom key codes====
Click on '''My Remote Control TV 1 GUI''' (cyan color)(pic 7).
*Press Play and/or Pause (or your combinations) when required to send FACTORY and 3SPEED codes (pic 8).
Screenshots:
<gallery>
Image:SamsungIR-1.png|pic 1.
Image:SamsungIR-2.png|pic 2.
Image:SamsungIR-3.png|pic 3.
Image:SamsungIR-4.png|pic 4.
Image:SamsungIR-5.png|pic 5.
Image:SamsungIR-6.png|pic 6.
Image:SamsungIR-7.png|pic 7.
Image:SamsungIR-8.png|pic 8.
</gallery>
==Symbian based phones==
Example with symbian based phone containing IR (infrared) port on board (Nokia N93, E51 etc). 
The phone '''must''' be rooted. 
Install '''Psiloc.irRemote.v1.04.sis''' and start it. The app you can easy find on the internet. 
Choose the '''AA59-00316b''' remote config and test it on your TV. 
Download '''Samsung Service_Remote''' using gprs (or wifi if exists) from applications internet server. Choose this config (the author is [http://forum.samygo.tv/memberlist.php?mode=viewprofile&u=10547 Gia90]) 
Now you have service codes: 7 for 3SPEED and 9 for FACTORY 

=samyGOrc (Rooted E/F ONLY)=
Root is mandatory, it means you need to have SamyGO already installed and wait for it to load in the background after opening Service Menu (about 1 minute until you gain FTP and Telnet access to TV)
: 1. Download and extract [http://forum.samygo.tv/download/file.php?id=3597 samyGOrc-v1.0.zip]
: 2. Connect to TV by FTP and copy extracted '''samyGOrc''' file to '''/mnt/opt/privateer/usr/bin'''
: 3. Telnet to TV and set file permissions
: <pre>chmod 755 /mnt/opt/privateer/usr/bin/samyGOrc</pre>
Steps above won't be necessary anymore if ever you need to use again this method, and might not be necessary at all on F where samyGOrc should be available by default. Now samyGOrc is installed and has execute rights. Only next step should be enough then.
: 4. Telnet to TV command to send consecutively FACTORY (=59) and 3SPEED (=60) keys
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 59; samyGOrc -p $(pidof exeTV || pidof exeDSP) 60</pre>
On the same principle, it's also possible to directly access ''extended'' service menu from "normal" TV state (TV ON, not already in service menu) by sending INFO (=31) + FACTORY (=59) keys (equivalent to INFO+MENU+MUTE+POWER from TV OFF then FACTORY+3SPEED) the same way. In order to achieve this, Telnet command:
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 31; samyGOrc -p $(pidof exeTV || pidof exeDSP) 59</pre>
This latest command could possibly allow access to ''extended'' service menu on some rooted '''E/F Bluray players''' as well.

=ruSamsungTVCommunicator (ruSTVC)=
[[File:RuSamsungTVCommunicator.png|right|350px|ruSamsungTVCommunicator]]
Software way and easiest way to reach your goal. This only works on TV`s with ethernet/wifi port and on models where the network remote control function isn`t disabled (all high end C, D and E series). However, it doesn't work any longer on most recent models/firmwares. 
1. Download the application from [http://samsung.rainerullrich.de author`s page]. 
2. Start ruSTVC on PC, and when asked, enable access to control TV on TV screen. If no popup appeared, navigate to 
Menu->System->Network Remote Control ->ruSTVC
and set ''allow'' 
3. Power off TV, enter to service menu (INFO MENU MUTE POWER on your RC) 
4. Press FACTORY and after this 3SPEED buttons on ruSTVC application. 
 
=Arduino project '''Ethernet to IR'''=
* '''[[Ethernet to IR and Serial Console Interface]]'''
 

=Original SamsungTV Factory Remote=
[[File:AA8100243A.png|Samsung Factory remote controller|50px|right]]
 
The part number of this remote is: '''AA8100243A''' 
This way to send Factory codes to TV is quite expensive, because the cost of this remote is 21-80$ on different internet stores. 
BTW we don`t know if it able to send 3SPEED code, because this button is missing.
Needed anyone who could confirm. 
 

=Programable universal remotes=
If you have programable RC like '''"One For All" URC-7320''' or similar, you also can send required codes to TV.
 

=Build your own IR transmitter=
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]'''

=IR blaster=
Many high-end TVs come bundled with an IR blaster, its use is similar to own built IR transmitter [http://wiki.samygo.tv/index.php5/Change_region_(Local_Set)_on_F_series]

 
 
=References=
 
 

--[[User:Zoelechat|Zoelechat]] ([[User talk:Zoelechat|talk]]) 19:30, 20 December 2014 (UTC)
--[[User:Juuso|Juuso]] ([[User talk:Juuso|talk]]) 12:51, 16 August 2016 (UTC)

File:SRC.png

2016-08-16T12:57:54Z

Juuso:

How to send FACTORY+3SPEED keys

2016-08-16T12:51:27Z

Juuso:

Here are known several ways how to send IR codes (most required to unlock Extended service menu options) to TV. 
You don`t need to use all described methods, it is enough to have one which works on your TV keeping in mind we need to send custom codes rare, most cases only once while unlocking PVR [http://wiki.samygo.tv/index.php5/Activating_PVR_on_D5500] or GuidePlus [http://wiki.samygo.tv/index.php5/Enabling_the_PVR_for_C-Series], change your Internet@TV region [http://wiki.samygo.tv/index.php5/How_to_change_your_Internet@TV_region], change model to get extra functionality on low end cheap C and D series TV`s [http://wiki.samygo.tv/index.php5/Enabling_Video_playback_on_C350], Enable MHP [http://wiki.samygo.tv/index.php5/How_to_enable_MHP_for_C-Series], enable Internet@tv in UC6000 T-valdeuc Tvs [http://wiki.samygo.tv/index.php5/How_to_enable_Internet@tv_in_UC6000_T-valdeuc_Tvs] or change locked by default other service menu options on C/D/E series TV`s and BD players...
 
All methods are cross-compatible, because the goal is to get Extended Service Menu, desn`t matter which way to use for that. In all cases (except switching on to hotel mode on C series), it is needed to send two codes to TV, FACTORY and 3SPEED '''while being in service menu'''. 
 
'''CAUTION!''', the danger to brick TV is high. You can harm your TV by changing values in service menu. Be 100% sure what you`re doing there. 
[[File:Servicemenu.jpg]] 

=Send IR using your phone=

==Android smartphones with built-in IR port==

==='''{{red | Recommended!}}''' Service Remote Control Samsung-TV '''(SRC)'''===
This is easiest way to access Extended Service Menu for most samsung TV`s.
[https://forum.samygo.tv/download/file.php?id=8299 '''Download SRC here''']

==='''Universal Remote app'''===
We will use next buttons for our goal:
Play - FACTORY
Pause - 3SPEED

::Suitable models::
*Samsung galaxy series with built in IR: '''[https://play.google.com/store/apps/details?id=remote.control.samsung Samsung IR - Universal Remote]'''(free version) or [https://play.google.com/store/apps/details?id=remote.control.samsungpro Pro version]
*HTC phones with built in IR blaster: '''[https://play.google.com/store/apps/details?id=com.htc.sample.ir HTC IR - Universal Remote]'''
*Other devices: for more info check '''http://www.power7.net/'''
====Setup your controls====
*Install and start '''Universal Remote''' (see above).(pic 1).
*Scroll down and open RED labeled '''{{red | My Remote Control 1 (TV)}}''' (pic 2), you will see buttons (pic 3).
:::('''NB!''' {{red|Do not use}} '''Remote GUI 1''' from menu at the top right corner neither "My IR REMOTE GUI", nor any other option like "My Remote Control 1 (TV) GUI" which is in cyan color, which brings you to real-remote like view as you have now! Do not use any button where is "GUI" in the name :))
*Scroll down and you will notice input fields beginning with ''Insert IR code string for...'' and button name.(pic 4).
*scroll even down and find ''Insert IR code string for Play...'' and replace the code which exists there to the hex code of FACTORY (pic5):
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689</pre>
*find ''Insert IR code string for Pause'' and replace to hex code for 3SPEED:
<pre>0000 006D 0000 0022 00AC 00AB 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0689
</pre>
*Navigate to the bottom and hit ''Save the IR codes'' and exit setup (with return)(pic 6).

====Sending custom key codes====
Click on '''My Remote Control TV 1 GUI''' (cyan color)(pic 7).
*Press Play and/or Pause (or your combinations) when required to send FACTORY and 3SPEED codes (pic 8).
Screenshots:
<gallery>
Image:SamsungIR-1.png|pic 1.
Image:SamsungIR-2.png|pic 2.
Image:SamsungIR-3.png|pic 3.
Image:SamsungIR-4.png|pic 4.
Image:SamsungIR-5.png|pic 5.
Image:SamsungIR-6.png|pic 6.
Image:SamsungIR-7.png|pic 7.
Image:SamsungIR-8.png|pic 8.
</gallery>
==Symbian based phones==
Example with symbian based phone containing IR (infrared) port on board (Nokia N93, E51 etc). 
The phone '''must''' be rooted. 
Install '''Psiloc.irRemote.v1.04.sis''' and start it. The app you can easy find on the internet. 
Choose the '''AA59-00316b''' remote config and test it on your TV. 
Download '''Samsung Service_Remote''' using gprs (or wifi if exists) from applications internet server. Choose this config (the author is [http://forum.samygo.tv/memberlist.php?mode=viewprofile&u=10547 Gia90]) 
Now you have service codes: 7 for 3SPEED and 9 for FACTORY 

=samyGOrc (Rooted E/F ONLY)=
Root is mandatory, it means you need to have SamyGO already installed and wait for it to load in the background after opening Service Menu (about 1 minute until you gain FTP and Telnet access to TV)
: 1. Download and extract [http://forum.samygo.tv/download/file.php?id=3597 samyGOrc-v1.0.zip]
: 2. Connect to TV by FTP and copy extracted '''samyGOrc''' file to '''/mnt/opt/privateer/usr/bin'''
: 3. Telnet to TV and set file permissions
: <pre>chmod 755 /mnt/opt/privateer/usr/bin/samyGOrc</pre>
Steps above won't be necessary anymore if ever you need to use again this method, and might not be necessary at all on F where samyGOrc should be available by default. Now samyGOrc is installed and has execute rights. Only next step should be enough then.
: 4. Telnet to TV command to send consecutively FACTORY (=59) and 3SPEED (=60) keys
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 59; samyGOrc -p $(pidof exeTV || pidof exeDSP) 60</pre>
On the same principle, it's also possible to directly access ''extended'' service menu from "normal" TV state (TV ON, not already in service menu) by sending INFO (=31) + FACTORY (=59) keys (equivalent to INFO+MENU+MUTE+POWER from TV OFF then FACTORY+3SPEED) the same way. In order to achieve this, Telnet command:
: <pre>samyGOrc -p $(pidof exeTV || pidof exeDSP) 31; samyGOrc -p $(pidof exeTV || pidof exeDSP) 59</pre>
This latest command could possibly allow access to ''extended'' service menu on some rooted '''E/F Bluray players''' as well.

=ruSamsungTVCommunicator (ruSTVC)=
[[File:RuSamsungTVCommunicator.png|right|350px|ruSamsungTVCommunicator]]
Software way and easiest way to reach your goal. This only works on TV`s with ethernet/wifi port and on models where the network remote control function isn`t disabled (all high end C, D and E series). However, it doesn't work any longer on most recent models/firmwares. 
1. Download the application from [http://samsung.rainerullrich.de author`s page]. 
2. Start ruSTVC on PC, and when asked, enable access to control TV on TV screen. If no popup appeared, navigate to 
Menu->System->Network Remote Control ->ruSTVC
and set ''allow'' 
3. Power off TV, enter to service menu (INFO MENU MUTE POWER on your RC) 
4. Press FACTORY and after this 3SPEED buttons on ruSTVC application. 
 
=Arduino project '''Ethernet to IR'''=
* '''[[Ethernet to IR and Serial Console Interface]]'''
 

=Original SamsungTV Factory Remote=
[[File:AA8100243A.png|Samsung Factory remote controller|50px|right]]
 
The part number of this remote is: '''AA8100243A''' 
This way to send Factory codes to TV is quite expensive, because the cost of this remote is 21-80$ on different internet stores. 
BTW we don`t know if it able to send 3SPEED code, because this button is missing.
Needed anyone who could confirm. 
 

=Programable universal remotes=
If you have programable RC like '''"One For All" URC-7320''' or similar, you also can send required codes to TV.
 

=Build your own IR transmitter=
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]'''

=IR blaster=
Many high-end TVs come bundled with an IR blaster, its use is similar to own built IR transmitter [http://wiki.samygo.tv/index.php5/Change_region_(Local_Set)_on_F_series]

 
 
=References=
 
 

--[[User:Zoelechat|Zoelechat]] ([[User talk:Zoelechat|talk]]) 19:30, 20 December 2014 (UTC)
--[[User:Juuso|Juuso]] ([[User talk:Juuso|talk]]) 12:51, 16 August 2016 (UTC)

Main Page

2016-07-03T16:14:10Z

Juuso: minor fix

== Welcome to SamyGO Wiki ==

{|border="0" cellpadding="5" cellspacing="0"
!width="480"|[[File:Logo.png]]
!align="left" valign="top"|<center>
{{red |
'''<big>WARNING</big>: DO NOT UPDATE THE SAMSUNG LATEST FIRMWARE UPGRADES or YOU CAN NOT USE OUR HACKS AND CAN NOT REVERT FIRMWARE BACK EASILY!'''
}}</center>

----

 

NOTE: For editing permissions, please send a request to ([https://forum.samygo.tv/ucp.php?i=pm&mode=compose&u=68 Erdem_ua] or [https://forum.samygo.tv/memberlist.php?mode=viewprofile&u=791 juusso]). Make sure to include a reason why you want to edit our wiki.

|}

== Compatibility Overview ==
See the [[Compatibility]] page to see which TV models should work.

 
== Safety Measures (which you shouldn't start without) ==
#Have a working [[Enable Serial Console on non CI+ Devices|Ex-Link cable]] at hand.
#Ensure the backup ''exe.img'' ( stored on ''/dev/tbml10'' ) is in good condition ( and ideally not altered ).
#Ensure your RS232 Setting in the Service-Menu is set to "debug" and that the Watchdog option in the service-menu is turned off (''Control'' -> ''SubOption'').
#Know that your TV will reset RS232 jack back to UART mode after new firmware installation or reverting back to old version.

 
== Useful WIKI articles ==
<big>Do you want to hack your TV? </big>
* [[This is the first document you have to read]]
*[[Is my TV supported?]]
*[[Do the SamyGO tools void my warranty?]]
*'''[[SamyGO for DUMMIES]]'''
*[[The A Series Wiki]]
*[[The B Series Wiki]]
*[[The C Series Wiki]]
*[[The D Series Wiki]]
*[[The E Series Wiki]]
*[[The F Series Wiki]]
*[[The H Series Wiki]]
*'''[[Injectso_patches | Injectable exeDSP/exeTV patches]]'''
*[[Using NoN-Samsung USB WiFi dongles with TV]]
*[http://en.wikipedia.org/wiki/SamyGO Wikipedia article] - ''spread the word''
*[[SamyGO on WEB]] - Articles about SamyGO
*[[Calibration]] - How to calibrate your TV.

 
=== General Information ===
*[[Samsung TV Skype Cameras]]
*[[Samsung 3D Glasses]]
*[[Card Sharing between TVs]]
*[[Frequently Asked Questions]]
*[[Service Manuals]]
*[[Service Menu]]
*[[Engineering Codes]]
*[[Top Debug Menu: TDM]]
*[[Media Play and DLNA]]
*[[DLNA format Requirements]]
*[[Samsung channel list format]]
*[[MessageBoxService request format]]
*[[Samsung TV network remote control protocol]]
*[[Wireshark Dissector for Samsung remote protocol]]
*[[Samsung OTN protocol]]
*[[RFS file system support for linux]]
*[[Donation List of SamyGO Project]]
*[[Acronyms & Abbreviations]]

 

== SamyGO DIY Hardwares ==
*[[SamyGO Brightness Sensor]]
*'''[[Build_your_own_IR_transmitter|Build the dual led IR transmitter]]''' (e.g. send Factory + 3SPEED codes)
*[[Enable Serial Console on non CI+ Devices |Ex-Link Cable for B-Series]]
*'''[[Ex-Link Cable for C/D/E Series and BD players]]'''
*'''[[Ethernet multi-function Interface]]'''
*[[Upgrade TV by replacing mainboard]]
*'''[[UnBricking TV by EEPROM Reset]]'''
*[[SmoothBacklight:_a_Hardware_Mod_for_Improving_Backlight_PWM_Frequency_of_Your_TV | SmoothBacklight: a Hardware Mod for Improving Backlight PWM Frequency of Your TV]]
 

== Interesting Reference Material ==
*[http://www.samsung.com/global/business/semiconductor/products/flash/downloads/applicationnote/rfs_v12_application_note.pdf Introduction to SAMSUNG's Linux Flash File System - RFS]
*[http://www.samsung.com/global/business/semiconductor/products/fusionmemory/downloads/RFS_130_Porting_Guide.pdf Linux RFS ( Robust FAT File System ) Porting Guide]
The file-system used in the the recent Samsung TVs is "RFS". Its proprietary nature and consequently so the absence of an according Linux RFS-Module in the standard Linux distributions makes it currently impossible to modify files by simply mounting the respective image as "RW", modifying it and saving the respective image again. This is the reason why currently all changes are done via patching of the image-binaries.
[http://forum.samygo.tv/viewtopic.php?f=4&t=1399 But the hope never dies].
*[http://www.samsung.com/global/business/semiconductor/products/flash/downloads/LinuStoreII_GPL%20Compliance_10.pdf License info about XRS and TinyXSR in Linux kernel and u-boot]
*[http://opensource.samsung.com Samsung's source codes] or [http://www.samsung.com/global/opensource/ old source code site]
All the source code Samsung is legally obliged to post can be found here.
*[http://forums.cnet.com/samsung-forum Official Samsung Forums]
Should be able to find useful info somewhere.

 
== Disclaimer ==
Neither this WIKI/Forum nor the author(s) of articles and information provided accept any responsibility for damage that may be caused by use of the information provided. You do everything at your own risk. Be aware that "hacking" activities may void your warranty!
<center>
<big>'''[[Crew List]]'''</big>
 & [[Rest In Peace]]
</center>

Patched firmware

2015-06-25T12:40:05Z

Juuso: /* Enter this IP:250px|thumb|left| */

{{red|'''Work in progress!'''}}
= '''SamyGO DNS service''' =
Is used only for Firmware downgrade and Patched firmware installation on C/D/E series for supported models only. You further acknowledge and agree that we are not responsible or liable, directly nor indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, site or resource. 
'''Precheck:''' 
{{red|If you never touched OTN in service menu '''there is no reason to change anything now.''' You can skip this step!!!!!}} 
*Access '''[[Service_Menu#Accessing_the_menu| Service menu]]'''
*Enter the '''Control'''-'''SubOption''' menu and set the values:
::*OTN to '''enabled'''.
::*OTN type '''operating'''
'''{{red|Caution!}}''' RC Keys '''Up'''&'''Down''' arrows make selections, while '''Right'''&'''Left''' arrows {{red|make changes}}. You needed to backup previous value before changing any option. Some options cannot be reverted once changed. The service menu has a protected 'advanced' submenu. Press the '''0''' button four times on advanced to enter the hidden menu. Before touching any setting, please note the original value. The menu settings are listed (with their default values?) in the '''[[Service Manuals]]'''. 
'''Installing firmware'''
*Set dns (depends on you network setup on tv or/and on your router) to:
[[File:Server_ip.png]]
*Switch tv off and on again
*Check from tv's menu for firmware update via internet
*Install firmware if it detects one

'''Notes:'''
*If you get an error at ~90% of install process turn tv off for ~3min and try again
*If no firmware are shown -> report it (not to Samsung but here in SUPPORT forum)
*'''Set your dns back to normal operational''' (if you don't do this your device will be banned after 2 days on server due senseless filling up of log files)
*Turn tv off and on again
*Don't forget to disable further firmware updates!!! ('''Samsung won't make any technical improvements in new firmwares''')

= '''B series TV`s''' =
To be updated
= '''C series TV`s''' =
== T-VAL6DEUC ==
1. ''Original firmware:'' T-VAL6DEUC-1016.0 
2. ''Features:'' 
* Executing own script during TV boot:{{small| (from root of fat32 formatted usb.)}}
/SamyGO/rcSGO
* Full unrestricted shell trough '''[[Ex-Link_Cable_for_C/D/E_Series_and_BD_players | Exlink]]''' {{small|(Symbol filtration at kernel level removed)}}
* Custom autostart - {{red |for advanced users only!}}. Ask on forum! 
3. ''Installation:'' 
Use '''[[Patched_firmware#SamyGO_DNS_service|DNS trick]]''' to get patched firmware installed. 
4. ''How to use:'' 
To have SamyGO running on TV, You should download, extract (and overwrite existing files):
1. SamyGO-All-Extensions-v0.03.6-r12-for-T-VALDEUC-20110103184650
2. SamyGO-All-Extensions-Bugfix-v0.03.6-r15-for-valencia-20111001120232
3. SamyGO-libs-T-VALDEUC-20110123101934
4. SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip
Required files are to be downloaded from '''[http://download.samygo.tv/C%20Series/For%20ARM%20CPUs/ download area]'''
== T-VALAUSC ==
''Original firmware:'' T-VALAUSC-1035.0 
''Features'', ''installation'' and ''usage'': same as '''[[Patched_firmware#T-VAL6DEUC | T-VAL6DEUC]]''', except you don`t need modules from VAL6DEUC (p.4)

= '''D series TV`s''' =
On SamyGO-Patched Firmware the '''[[SamyGO Extensions Pack]]''' are auto-started during boot (see following list)
==T-GAP8AKUC_001118 (real version: 1018.4)==
*USB-Hotplug: execute script run.sh from usb on insertion
*Starts '''/mtd_rwarea/user.sh''' if exists (instead of exeDSP start from rc.local)
*Unlimited shell trough ExLink unlocked
*PVR to fat32 formatted USB

= '''E series TV`s''' =
==T-MST10DEUC 1030.0==
*'''[[SamyGO Extensions Pack]]''' is included ('''/usr/SamyGO/SamyGO''') and auto-started on boot

==T-ECPDEUC 2003.4==
*SamyGO HD-Logo
*'''[[SamyGO Extensions Pack]]''' is included ('''/usr/SamyGO/SamyGO''') and auto-started on boot

= '''BluRay players''' =
=== Installing '''[[SamyGO Extensions Pack]]''' ===
====Go to Settings (blue or (D))-> Development -> '''Setting Server IP'''====
====Enter this IP: [[Image:Server_ip.png|250px|thumb|left| ]]====

====Press '''User Application Synchronization'''====
Wait until TV installs widget (SamyGO Extensions)...
Could take a while, depends from your internet speed. Wait until TV says "done"
NB! All other your widgets, installed from local server before were deleted!
====Exit developer menu, exit SmartHub.====
===On SamyGO-Patched Firmware the [[SamyGO Extensions Pack]] are auto-started during boot (see following list) ===
====B-FIRHRDEUC_001107 (real version: 1007.0)====
*USB-Hotplug: execute script run.sh from usb on insertion

====B-FIRHTBEUC_001112 (real version: 1012.2)====
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
*Starts '''/mtd_rwarea/myBoot.sh''' if present instead of exeDSP start-script (original Samsung "Hack")

====B-FIRHTBEUC_001116 (real version: 1016.3)====
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
*Starts '''/mtd_rwarea/myBoot.sh''' if present insead of exeDSP start-script (origial Samsung "Hack")
*Starts '''/mtd_rwarea/user.sh''' if present insead of exeDSP start-script

====B-FIRURDEUC_001103 (real version: 1003.2)====
*USB-Hotplug: execute script '''run.sh''' from usb on insertion

====B-FIRBP7WWC_001671 (real version: 1004.x)====
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
*Starts '''/mtd_rwarea/user.sh''' if present insead of exeDSP start-script

= '''[[ExeDSP_modifications | exeDSP Patches]]''' =
Please read '''[[ExeDSP_modifications | more...]]'''

=References=
Related samygo.tv forum topics: 
#[B series] 
#'''[http://forum.samygo.tv/viewtopic.php?f=10&t=2255 C series]''' 
#'''[http://forum.samygo.tv/viewtopic.php?f=22&t=4199 D series]''' 
#'''[http://forum.samygo.tv/viewtopic.php?f=50&t=4313 E series]''' 
#'''[http://forum.samygo.tv/viewtopic.php?f=18&t=4244 BluRay players]'''

File:Develop ip.png

2015-05-31T20:00:30Z

Juuso: Juuso uploaded a new version of File:Develop ip.png

server ip.

File:Develop ip.png

2015-03-29T10:37:39Z

Juzis28: Juzis28 uploaded a new version of File:Develop ip.png

server ip.

File:Server ip.png

2015-03-15T19:01:31Z

Juzis28: Juzis28 uploaded a new version of File:Server ip.png

Rooting H series TV

2014-12-29T17:27:13Z

Juzis28: link to Extras->root H series

* [http://forum.samygo.tv/viewtopic.php?f=70&t=8469 Related topic on the forum...]

File:Widget.png

2014-11-26T18:40:30Z

Juzis28: