'''Universal USB disk to hack C series TV'''

''''''WARNING - Do not type ''reboot, halt, shutdown'' in console - it was the reason on few bricked TVs. Temporary stop using channel editor in web-ui until next version of hack is released'''

After hack your TV you can connect to TV via Telnet, you get CIFS (Samba) and NFS support, FTP Server, WebUI, crond, ... 
Moreover, if you attach USB with script file "SamyGO.sh", it will be executed. 
This hack has unificated structure for comfortable script execution for developers (read below).
 
==Safety measures for C series TVs==
Make some important settings before start hacking TV:
* In service menu, '''enable Debug mode''' for the RS232 port.
::With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]'''
::Enter the '''Control''' menu and set the value of the '''RS232 mode''' to '''Debug'''.
::Once you're back to the main Service menu, you will have to power off the TV for normal operation.
::Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
* Have a working '''[[Ex-Link Cable for C-Series]]''' at hand. (desirable)
::If you don't feel capable of soldering such a cable, you can find and buy a cheap (under '''$5''') '''[http://shop.ebay.com/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A4030&rt=nc&_nkw=usb+ttl&_sticky=1&_trksid=p3286.c0.m14&_sop=15&_sc=1 USB to TTL adapter]''' at eBay.

== Supported TV models ==
TV model is not important, you should check your firmware. 
* This hack '''works''' on all firmware versions (even latest firmwares):
T-TDT5DEUC
T-MSX5DEUC
T-MSX6DEUC
T-VALDEUC
T-VALAUSC (modification of hack needed)
* Hack '''does not''' work on TV with '''T-VAL6DEUC''' firmware.

== Preparation ==
1. USB > 1GB space (Windows users can use FAT32 formatted USB) 
2. TV in normal mode. Export channels from TV to clean FAT32 USB 
3. Activate Hotel Mode
[Mute] [1] [1] [9] [Enter]
set to '''on''' by pressing [left]
4. Export settings from TV to the same FAT32 USB ("Clone TV to USB") 
5. Unplug USB stick from TV and save files you get anywhere on PC 
6. Download [http://download.samygo.tv/C%20Series/HotelMode%20hack/network_opt_18.02.2011_1.zip network_opt_18.02.2011_1.zip], extract archive. You get 1GB file '''network_opt_18.02.2011_sda2.img''' 
*'''IMPORTANT:''' This is the 3rd version of the USB image, updated on 18.2.2011. 
::If you have hacked TV with the earlier version or over widget and you want have benefits of this hack, 
::you should [http://wiki.samygo.tv/index.php?title=Hacking_TV_over_Hotel_mode_%28most_C_series_models%29#TV_is_already_hacked re-hack TV].[[File:Win32diskimage_howto.png |right]] 
7. Make USB from this image with help of included win32diskimager (or "dd" if you are using linux)
* After win32diskimager finishes, you get two partitions on USB: one FAT32, accessible under Windows and a second, ext3 - not accessible under Windows. 
* You '''do not need''' to do any changes on ext3 partition. 
* '''All operations have to be done on the FAT32 partition, no linux needed.'''
 

== Installation. What to do if... ==
 
=== '''TV is not hacked''' ===
8. Attach Universal hack USB you made to PC. Copy channel settings file (you made in normal mode) to root of USB. 
9. Rename file (channel_list_LE32C550_1001.scm for C550) to zip
channel_list_LE32C550_1001.scm.zip
10. Add directory ''usb_mount'' with empty file in it (e.g. ''1.txt;'' - very important) to archive 
11. Rename back to channel_list_LE32C550_1001.scm
* You get files inside of archive:
Archive: channel_list_LE32C550_1001.scm
Length Date Time Name
--------- ---------- ----- ----
68 2038-01-19 06:14 CloneInfo
96 2038-01-19 06:14 FineTune_Digital
40000 2038-01-19 06:14 map-AirA
292000 2038-01-19 06:14 map-AirD
40000 2038-01-19 06:14 map-CableA
292000 2038-01-19 06:14 map-CableD
4 2038-01-19 06:14 map-ChKey
720 2038-01-19 06:14 RadioMap
0 2010-11-30 21:55 usb_mount/
8 2010-11-30 21:55 usb_mount/1.txt
--------- -------
664896 10 files
12. Copy files exported in Hotel mode (from the step "Clone TV to USB" above, only files, without directories) to '''/HotelMode''' directory on USB
* Exported in HotelMode files to copy:
./T-MSX5DEUC/Clone:

drwxr-xr-x 2 root root 4096 2010-12-27 18:39 .
drwxr-xr-x 3 root root 4096 2010-12-27 18:39 ..
-rw-r--r-- 1 root root 2304 1980-01-01 00:00 Clone.dat
-rw-r--r-- 1 root root 378 1980-01-01 00:00 FADAT
-rw-r--r-- 1 root root 144 1980-01-01 00:00 FineTune_Digital
-rw-r--r-- 1 root root 188 1980-01-01 00:00 LNBSettingsDataBase.dat
-rw-r--r-- 1 root root 40000 1980-01-01 00:00 map-AirA
-rw-r--r-- 1 root root 292000 1980-01-01 00:00 map-AirD
-rw-r--r-- 1 root root 40000 1980-01-01 00:00 map-CableA
-rw-r--r-- 1 root root 292000 1980-01-01 00:00 map-CableD
-rw-r--r-- 1 root root 4 1980-01-01 00:00 map-ChKey
-rw-r--r-- 1 root root 144000 1980-01-01 00:00 map-SateD
-rw-r--r-- 1 root root 95 1980-01-01 00:00 PackageDataBase.dat
-rw-r--r-- 1 root root 5382 1980-01-01 00:00 PLDAT
-rw-r--r-- 1 root root 720 1980-01-01 00:00 RadioMap
-rw-r--r-- 1 root root 7979 1980-01-01 00:00 SatDataBase.dat
-rw-r--r-- 1 root root 324 1980-01-01 00:00 ServiceProviders
-rw-r--r-- 1 root root 9478 1980-01-01 00:00 SSDAT
-rw-r--r-- 1 root root 98554 1980-01-01 00:00 TransponderDataBase.dat
-rw-r--r-- 1 root root 28 1980-01-01 00:00 TSIDList
-rw-r--r-- 1 root root 4 1980-01-01 00:00 UserTransponderDataBase.dat

13. Exit from Hotel mode:
Mute-1-1-9-Enter
set to '''off'''
* Hotel Mode → Off
14. Attach USB to TV and import channel settings to TV. Everything must work without errors. 
15. Activate Hotel mode again.
Mute-1-1-9-Enter
set to '''on''' by pressing "left"
16. Import HotelMode settings you exported before (as is, with directories) ("Clone USB to TV") 
17. Press OK. 
18. TV restarts few times and starts in ''black screen''. DO NOT POWER OFF, DO NOT DISCONNECT USB! 
* '''Wait 3 minutes'''. After three minutes you can switch off TV.
* Switch on TV again
* Try connect to TV over Telnet (Port 23).
* If you get to console, congratulations.
* TV starts in Hotel mode. If you have your channel settings, you can deactivate hotel mode from service menu.
19. If you haven't got your channels back and if you can't Telnet to TV, it means something went wrong.
* Look for file ''first_run.ok'' and content of directory ''/result'' on USB
20. If you have Telnet after hack, execute:
cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh
21. Done.

=== '''TV is already hacked''' ===
(Over Hotel Mode or Widget - doesn`t matter)
* Make USB (steps 6. and 7.)
* Do not change anything
* Attach to TV and connect via SSH/Telnet
* Find your usb:
df -h | grep "/dtv/usb/sd"
* execute script '''first_run.sh''' with parameter of path to USB.
::e.g. if path to USB is '''/dtv/usb/sda1''', then command to enter is:
sh +x /dtv/usb/sda1/first_run.sh /dtv/usb/sda1
Path might be different on your TV, for example:
::/dtv/usb/sdb1/first_run.sh /dtv/usb/sdb1
::/dtv/usb/sdc1/first_run.sh /dtv/usb/sdc1
Check exact path over Telnet before you start.
* Wait until you get the message "Installation Completed!", but '''do not reboot TV 3 minutes''' (TV is making some dumps in this time, do not interrupt it.)
* Reboot TV (switch off, wait, switch on again)
* Done

== Normal operating of hacked TV ==
* To get access to TV (Telnet/FTP/WebUI) you must attach the same USB-stick that you created for this hack '''or''' prepare USB-stick with the latest [http://download.samygo.tv/C%20Series/ SamyGO-Extensions]. (If you need to know your CPU type enter '''cat /proc/cpuinfo''' into console.)

* Example for mounting a NFS-share manually:
cd /dtv/usb/sda1
mkdir videos
/bin/mount -o nolock 192.168.1.123:/videos /dtv/usb/sda1/videos -t nfs
Change IP to your NFS-server IP, path to USB might differ too (sdb1/sdc1).
* To watch movies, create empty directory on root of usb:
!network

== Bricked TV ==
* ''''''WARNING - Do not type ''reboot'' in console - it was the reason on few bricked TVs.'''

=== '''ExLink cable available''' ===
==== Screen is blank ====
If your start.sh has been written with errors, TV does not boot properly... 
* Unplug TV and wait 30 sec. Plug to AC, power on TV.
This should remove /mtd_rwarea/start.sh. If that did not help, try:
* Connect [[Ex-Link Cable for C-Series]], switch to debug mode:
10041004
enter:
31337 (removes /mtd_rwarea/start.sh)
or:
666 (removes /mtd_rwarea/start.sh, /mtd_rwarea/usb_mount, /mtd_rwarea/network_opt)
or:
44337794 (check file to know better what it does /mtd_rwarea/network_opt/sbin/44337794)

==== No reaction to USB, no telnet, but screen is on ====
* create empty file named '''kill_start.sh''' on root of USB
* power off TV
* attach USB and power on TV
/mtd_rwarea/start.sh should be deleted

If no success, then:
==== format /mtd_rwarea/ ====
If you do not have success or script finishes with error,
or you have hacked over Widget and it stopped working (on latest firmwares),
Format /mtd_rwarea over ExLink and get "virgin" TV back:
* Make [[Ex-Link Cable for C-Series]] attach to TV.
* Power off TV.
* Unplug network and antenna cable. Leave only ExLink and power cable plugged.
* Power on TV.
* Open terminal and connect to TV over ExLink.
* Apply these commands (followed by Enter):
10041004
81588
20089999
2
0
0
2 (advanced)
2 (DeviceManager Debug)
90 (DeviceManager MW Debug)
12 (DLNA, FLASH, ODD, HDD, MoIP Test)
11 (FLASH, HDD Format Test)
10 (or another, /mtd_rwarea/ partition number (14)

::On the last line you have to enter number of your /mtd_rwarea/. On C550 it is 10, but on other TV it can be other (e.g. 14)
::Try to hack TV again starting from step 7.

=== '''no ExLink cable available''' ===

* Create script on USB '''emergency_start.sh''' (kill_start.sh is to delete)
* Attach USB to TV on stand-by mode and power it on
* TV executes this script on boot.
Factory reset on ServiceMenu. This operation should delete ''/mtd_rwarea/network_opt''
*Hack TV with universal USB disk again

'''If you lost the hack and try to rehack and get message "failed to receive file from usb..."'''
Try this
*Copy channel list to usb e rename as zip file
*Add the directory usb_mount with the file 1.txt in it
*Add this directories (only directories no file): network_opt/usr/sbin/usb_mount
*rename the file in scm.
*re-hack using this channel list.
(works on 3008.3 T-Valdeuc firmware)

== FAQ ==
To be updated...

== Tested and works on TV ==
* LE32C530 [T-MSX5DEUC-2007.4]
* LE32C550J1W [T-MSX5DEUC-2005.4]
* LE32C550J1WU [T-MSX5DEUC-2007.4]
* LE32C550J1WX [T-MSX5DEUC-2005.4]
* LE37C630 [T-MSX6DEUC 1002.1] 
* LE40C650L1WX [T-VALDEUC-2002]
* LE40C650L1WXZG [T-VALDEUC '''3007.1''']
* LE40C550 [T-MSX5DEUC-2003.1]
* LE40C750 [T-VALDEUC 3007.1]
* PN58C7000 [T-VALAUSC 001035] - some [http://forum.samygo.tv/viewtopic.php?f=13&t=974&p=13650#p13642 modification] of hack is needed.
* PS50C550 [T-TDT5DEUC]
* UE32C5100QW [T-MSX5DEUC-2007.4]
* UE32C5000QW [T-TDT5DEUC-1022.0 ]
* UE40C8700 [T-VALDEUC-'''3006.2''']
* UE40C8700 [T-VALDEUC '''3007.1''']
* UE40C6700 [T-VALDEUC '''3007.1''']
* UE46C6105 [T-MSX5DEUC-2005.4]
* UE55C7700 [T-VALDEUC '''3006.1''']
* UE55C8705 [T-VALDEUC '''3007.1''']
::To be updated... 
 
Author and developer of universal USB hack disk - Perforator from forum.ixbt.com (He made the first hack for C series TV also). 
 
 
--[[User:Juzis28|Juzis28]] 12:13, 11 March 2011 (UTC)

Hacking TV over Hotel mode (most C series models)

2011-06-03T15:04:39Z

Tempinbox: /* no ExLink cable available */

'''Universal USB disk to hack C series TV'''

''''''WARNING - Do not type ''reboot, halt, shutdown'' in console - it was the reason on few bricked TVs. Temporary stop using channel editor in web-ui until next version of hack is released'''

After hack your TV you can connect to TV via Telnet, you get CIFS (Samba) and NFS support, FTP Server, WebUI, crond, ... 
Moreover, if you attach USB with script file "SamyGO.sh", it will be executed. 
This hack has unificated structure for comfortable script execution for developers (read below).
 
==Safety measures for C series TVs==
Make some important settings before start hacking TV:
* In service menu, '''enable Debug mode''' for the RS232 port.
::With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]'''
::Enter the '''Control''' menu and set the value of the '''RS232 mode''' to '''Debug'''.
::Once you're back to the main Service menu, you will have to power off the TV for normal operation.
::Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
* Have a working '''[[Ex-Link Cable for C-Series]]''' at hand. (desirable)
::If you don't feel capable of soldering such a cable, you can find and buy a cheap (under '''$5''') '''[http://shop.ebay.com/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A4030&rt=nc&_nkw=usb+ttl&_sticky=1&_trksid=p3286.c0.m14&_sop=15&_sc=1 USB to TTL adapter]''' at eBay.

== Supported TV models ==
TV model is not important, you should check your firmware. 
* This hack '''works''' on all firmware versions (even latest firmwares):
T-TDT5DEUC
T-MSX5DEUC
T-MSX6DEUC
T-VALDEUC
T-VALAUSC (modification of hack needed)
* Hack '''does not''' work on TV with '''T-VAL6DEUC''' firmware.

== Preparation ==
1. USB > 1GB space (Windows users can use FAT32 formatted USB) 
2. TV in normal mode. Export channels from TV to clean FAT32 USB 
3. Activate Hotel Mode
[Mute] [1] [1] [9] [Enter]
set to '''on''' by pressing [left]
4. Export settings from TV to the same FAT32 USB ("Clone TV to USB") 
5. Unplug USB stick from TV and save files you get anywhere on PC 
6. Download [http://download.samygo.tv/C%20Series/HotelMode%20hack/network_opt_18.02.2011_1.zip network_opt_18.02.2011_1.zip], extract archive. You get 1GB file '''network_opt_18.02.2011_sda2.img''' 
*'''IMPORTANT:''' This is the 3rd version of the USB image, updated on 18.2.2011. 
::If you have hacked TV with the earlier version or over widget and you want have benefits of this hack, 
::you should [http://wiki.samygo.tv/index.php?title=Hacking_TV_over_Hotel_mode_%28most_C_series_models%29#TV_is_already_hacked re-hack TV].[[File:Win32diskimage_howto.png |right]] 
7. Make USB from this image with help of included win32diskimager (or "dd" if you are using linux)
* After win32diskimager finishes, you get two partitions on USB: one FAT32, accessible under Windows and a second, ext3 - not accessible under Windows. 
* You '''do not need''' to do any changes on ext3 partition. 
* '''All operations have to be done on the FAT32 partition, no linux needed.'''
 

== Installation. What to do if... ==
 
=== '''TV is not hacked''' ===
8. Attach Universal hack USB you made to PC. Copy channel settings file (you made in normal mode) to root of USB. 
9. Rename file (channel_list_LE32C550_1001.scm for C550) to zip
channel_list_LE32C550_1001.scm.zip
10. Add directory ''usb_mount'' with empty file in it (e.g. ''1.txt;'' - very important) to archive 
11. Rename back to channel_list_LE32C550_1001.scm
* You get files inside of archive:
Archive: channel_list_LE32C550_1001.scm
Length Date Time Name
--------- ---------- ----- ----
68 2038-01-19 06:14 CloneInfo
96 2038-01-19 06:14 FineTune_Digital
40000 2038-01-19 06:14 map-AirA
292000 2038-01-19 06:14 map-AirD
40000 2038-01-19 06:14 map-CableA
292000 2038-01-19 06:14 map-CableD
4 2038-01-19 06:14 map-ChKey
720 2038-01-19 06:14 RadioMap
0 2010-11-30 21:55 usb_mount/
8 2010-11-30 21:55 usb_mount/1.txt
--------- -------
664896 10 files
12. Copy files exported in Hotel mode (from the step "Clone TV to USB" above, only files, without directories) to '''/HotelMode''' directory on USB
* Exported in HotelMode files to copy:
./T-MSX5DEUC/Clone:

drwxr-xr-x 2 root root 4096 2010-12-27 18:39 .
drwxr-xr-x 3 root root 4096 2010-12-27 18:39 ..
-rw-r--r-- 1 root root 2304 1980-01-01 00:00 Clone.dat
-rw-r--r-- 1 root root 378 1980-01-01 00:00 FADAT
-rw-r--r-- 1 root root 144 1980-01-01 00:00 FineTune_Digital
-rw-r--r-- 1 root root 188 1980-01-01 00:00 LNBSettingsDataBase.dat
-rw-r--r-- 1 root root 40000 1980-01-01 00:00 map-AirA
-rw-r--r-- 1 root root 292000 1980-01-01 00:00 map-AirD
-rw-r--r-- 1 root root 40000 1980-01-01 00:00 map-CableA
-rw-r--r-- 1 root root 292000 1980-01-01 00:00 map-CableD
-rw-r--r-- 1 root root 4 1980-01-01 00:00 map-ChKey
-rw-r--r-- 1 root root 144000 1980-01-01 00:00 map-SateD
-rw-r--r-- 1 root root 95 1980-01-01 00:00 PackageDataBase.dat
-rw-r--r-- 1 root root 5382 1980-01-01 00:00 PLDAT
-rw-r--r-- 1 root root 720 1980-01-01 00:00 RadioMap
-rw-r--r-- 1 root root 7979 1980-01-01 00:00 SatDataBase.dat
-rw-r--r-- 1 root root 324 1980-01-01 00:00 ServiceProviders
-rw-r--r-- 1 root root 9478 1980-01-01 00:00 SSDAT
-rw-r--r-- 1 root root 98554 1980-01-01 00:00 TransponderDataBase.dat
-rw-r--r-- 1 root root 28 1980-01-01 00:00 TSIDList
-rw-r--r-- 1 root root 4 1980-01-01 00:00 UserTransponderDataBase.dat

13. Exit from Hotel mode:
Mute-1-1-9-Enter
set to '''off'''
* Hotel Mode → Off
14. Attach USB to TV and import channel settings to TV. Everything must work without errors. 
15. Activate Hotel mode again.
Mute-1-1-9-Enter
set to '''on''' by pressing "left"
16. Import HotelMode settings you exported before (as is, with directories) ("Clone USB to TV") 
17. Press OK. 
18. TV restarts few times and starts in ''black screen''. DO NOT POWER OFF, DO NOT DISCONNECT USB! 
* '''Wait 3 minutes'''. After three minutes you can switch off TV.
* Switch on TV again
* Try connect to TV over Telnet (Port 23).
* If you get to console, congratulations.
* TV starts in Hotel mode. If you have your channel settings, you can deactivate hotel mode from service menu.
19. If you haven't got your channels back and if you can't Telnet to TV, it means something went wrong.
* Look for file ''first_run.ok'' and content of directory ''/result'' on USB
20. If you have Telnet after hack, execute:
cp $OPT_DIR/usr/restore/start.sh /mtd_rwarea/start.sh
21. Done.

=== '''TV is already hacked''' ===
(Over Hotel Mode or Widget - doesn`t matter)
* Make USB (steps 6. and 7.)
* Do not change anything
* Attach to TV and connect via SSH/Telnet
* Find your usb:
df -h | grep "/dtv/usb/sd"
* execute script '''first_run.sh''' with parameter of path to USB.
::e.g. if path to USB is '''/dtv/usb/sda1''', then command to enter is:
sh +x /dtv/usb/sda1/first_run.sh /dtv/usb/sda1
Path might be different on your TV, for example:
::/dtv/usb/sdb1/first_run.sh /dtv/usb/sdb1
::/dtv/usb/sdc1/first_run.sh /dtv/usb/sdc1
Check exact path over Telnet before you start.
* Wait until you get the message "Installation Completed!", but '''do not reboot TV 3 minutes''' (TV is making some dumps in this time, do not interrupt it.)
* Reboot TV (switch off, wait, switch on again)
* Done

== Normal operating of hacked TV ==
* To get access to TV (Telnet/FTP/WebUI) you must attach the same USB-stick that you created for this hack '''or''' prepare USB-stick with the latest [http://download.samygo.tv/C%20Series/ SamyGO-Extensions]. (If you need to know your CPU type enter '''cat /proc/cpuinfo''' into console.)

* Example for mounting a NFS-share manually:
cd /dtv/usb/sda1
mkdir videos
/bin/mount -o nolock 192.168.1.123:/videos /dtv/usb/sda1/videos -t nfs
Change IP to your NFS-server IP, path to USB might differ too (sdb1/sdc1).
* To watch movies, create empty directory on root of usb:
!network

== Bricked TV ==
* ''''''WARNING - Do not type ''reboot'' in console - it was the reason on few bricked TVs.'''

=== '''ExLink cable available''' ===
==== Screen is blank ====
If your start.sh has been written with errors, TV does not boot properly... 
* Unplug TV and wait 30 sec. Plug to AC, power on TV.
This should remove /mtd_rwarea/start.sh. If that did not help, try:
* Connect [[Ex-Link Cable for C-Series]], switch to debug mode:
10041004
enter:
31337 (removes /mtd_rwarea/start.sh)
or:
666 (removes /mtd_rwarea/start.sh, /mtd_rwarea/usb_mount, /mtd_rwarea/network_opt)
or:
44337794 (check file to know better what it does /mtd_rwarea/network_opt/sbin/44337794)

==== No reaction to USB, no telnet, but screen is on ====
* create empty file named '''kill_start.sh''' on root of USB
* power off TV
* attach USB and power on TV
/mtd_rwarea/start.sh should be deleted

If no success, then:
==== format /mtd_rwarea/ ====
If you do not have success or script finishes with error,
or you have hacked over Widget and it stopped working (on latest firmwares),
Format /mtd_rwarea over ExLink and get "virgin" TV back:
* Make [[Ex-Link Cable for C-Series]] attach to TV.
* Power off TV.
* Unplug network and antenna cable. Leave only ExLink and power cable plugged.
* Power on TV.
* Open terminal and connect to TV over ExLink.
* Apply these commands (followed by Enter):
10041004
81588
20089999
2
0
0
2 (advanced)
2 (DeviceManager Debug)
90 (DeviceManager MW Debug)
12 (DLNA, FLASH, ODD, HDD, MoIP Test)
11 (FLASH, HDD Format Test)
10 (or another, /mtd_rwarea/ partition number (14)

::On the last line you have to enter number of your /mtd_rwarea/. On C550 it is 10, but on other TV it can be other (e.g. 14)
::Try to hack TV again starting from step 7.

=== '''no ExLink cable available''' ===

* Create script on USB '''emergency_start.sh''' (kill_start.sh is to delete)
* Attach USB to TV on stand-by mode and power it on
* TV executes this script on boot.
Factory reset on ServiceMenu. This operation should delete ''/mtd_rwarea/network_opt''
*Hack TV with universal USB disk again

=== If you lost the hack and try to rehack and get message "failed to receive file from usb..."
try this
Copy channel list to usb e rename as zip file
Add the directory usb_mount with the file 1.txt in it
Add this directories (only directories no file): network_opt/usr/sbin/usb_mount
rename the file in scm.
re-hack using this channel list.
(works on 3008.3 T-Valdeuc firmware)

== FAQ ==
To be updated...

== Tested and works on TV ==
* LE32C530 [T-MSX5DEUC-2007.4]
* LE32C550J1W [T-MSX5DEUC-2005.4]
* LE32C550J1WU [T-MSX5DEUC-2007.4]
* LE32C550J1WX [T-MSX5DEUC-2005.4]
* LE37C630 [T-MSX6DEUC 1002.1] 
* LE40C650L1WX [T-VALDEUC-2002]
* LE40C650L1WXZG [T-VALDEUC '''3007.1''']
* LE40C550 [T-MSX5DEUC-2003.1]
* LE40C750 [T-VALDEUC 3007.1]
* PN58C7000 [T-VALAUSC 001035] - some [http://forum.samygo.tv/viewtopic.php?f=13&t=974&p=13650#p13642 modification] of hack is needed.
* PS50C550 [T-TDT5DEUC]
* UE32C5100QW [T-MSX5DEUC-2007.4]
* UE32C5000QW [T-TDT5DEUC-1022.0 ]
* UE40C8700 [T-VALDEUC-'''3006.2''']
* UE40C8700 [T-VALDEUC '''3007.1''']
* UE40C6700 [T-VALDEUC '''3007.1''']
* UE46C6105 [T-MSX5DEUC-2005.4]
* UE55C7700 [T-VALDEUC '''3006.1''']
* UE55C8705 [T-VALDEUC '''3007.1''']
::To be updated... 
 
Author and developer of universal USB hack disk - Perforator from forum.ixbt.com (He made the first hack for C series TV also). 
 
 
--[[User:Juzis28|Juzis28]] 12:13, 11 March 2011 (UTC)