Difference between revisions of "BEFORE YOU START: Safety measures for C series TVs"
(Created page with '* In service menu, '''enable Debug mode''' for the RS232 port. :: With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]''' :: Enter thâ¦') |
|||
Line 2: | Line 2: | ||
:: With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]''' | :: With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]''' | ||
:: Enter the '''Control''' menu and set the value of the '''RS232 mode''' to '''Debug'''. | :: Enter the '''Control''' menu and set the value of the '''RS232 mode''' to '''Debug'''. | ||
+ | :: Once you're back to the main Service menu, you will have to power off the TV for normal operation. | ||
:: Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer). | :: Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer). | ||
* Have a working '''[[Ex-Link Cable for C-Series]]''' at hand. | * Have a working '''[[Ex-Link Cable for C-Series]]''' at hand. | ||
:: If you don't feel capable to solder such a cable, you can find and buy a cheap (under '''$5''') '''[http://shop.ebay.com/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A4030&rt=nc&_nkw=usb+ttl&_sticky=1&_trksid=p3286.c0.m14&_sop=15&_sc=1 USB to TTL]''' adapter at eBay. | :: If you don't feel capable to solder such a cable, you can find and buy a cheap (under '''$5''') '''[http://shop.ebay.com/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A4030&rt=nc&_nkw=usb+ttl&_sticky=1&_trksid=p3286.c0.m14&_sop=15&_sc=1 USB to TTL]''' adapter at eBay. |
Revision as of 12:30, 10 January 2011
- In service menu, enable Debug mode for the RS232 port.
- With TV switched off, press the following sequence on the remote: [INFO] [MENU] [MUTE] [POWER]
- Enter the Control menu and set the value of the RS232 mode to Debug.
- Once you're back to the main Service menu, you will have to power off the TV for normal operation.
- Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
- Have a working Ex-Link Cable for C-Series at hand.
- If you don't feel capable to solder such a cable, you can find and buy a cheap (under $5) USB to TTL adapter at eBay.