HDMI Calibration TIP


From SamyGO
Revision as of 17:28, 4 April 2013 by Juzis28 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

If You mess up HDMI Calibration (adc/wb - in service menu) by accident here is a short tip how to quick and successfully re-calibrate HDMI - without any additional device (no pc, dvd, bd, ps3 etc).

In the Service menu go to :

SVC -> TEST PATTERN ->HDMI PATTERN SEL-> set to 7

Fullscreen Checkerboard should appear on Your TV.

Go back to main screen of service menu

Go to ADC/WB->ADC->HDNMI CALLIBRATION... and put left or right arrow on remote.

After few seconds it will end with success.

Tested on ES7000 by vanisz


References