Difference between revisions of "Rooting the ES-series"


From SamyGO
Jump to: navigation, search
m
m
Line 14: Line 14:
  
 
<br>
 
<br>
1. Enter SmartHub (by pressing the smarthub button on the remote) <br>
+
1. Enter "SMART HUB" screen by pressing the smarthub button on the remote <br>
2. After loading the widget, go to Settings (D or blue)<br>
+
2. Press the "TOOLS" button<br>
 +
3. Go to "Settings" entry in the Tools menu<br>
 
3. Press "Create an account" <br>
 
3. Press "Create an account" <br>
4. Enter the name: '''develop''' and password(any)<br>
+
4. Enter the name: '''develop''' and any password (keep it simple this time)<br>
5. Exit SmartHub and reboot TV
+
5. EXIT "SMART HUB" and reboot TV
 
<br><br>
 
<br><br>
  

Revision as of 15:54, 18 December 2012

WARNING!

!! THIS PAGE IS WORK IN PROGRESS, DO NOT USE UNTIL THIS MESSAGE IS REMOVED !!

Due to the WIP status of this, we are working on a non-permanent rooting utility. The plan is to use a USB memory stick based rooting tool, that must be activated manually every time TV is started. Preferably it should be done by linking it to the useless "Family Story" button on the remote control.


Prepare the USB memory stick

<< TBA >>

Create the SMART-HUB developer account


1. Enter "SMART HUB" screen by pressing the smarthub button on the remote
2. Press the "TOOLS" button
3. Go to "Settings" entry in the Tools menu
3. Press "Create an account"
4. Enter the name: develop and any password (keep it simple this time)
5. EXIT "SMART HUB" and reboot TV

NB! If you can`t create account (option is greyed out)
Then go direct to Login (red or A) and enter:

user: develop
password: 111111 (or any other six digits as password)

Installing hack

1. Start SmartHub
2. Go to Login (red or (A))
3. Go to Settings (blue or (D))-> Development -> Setting Server IP
4. Enter this IP:

Develop ip.png









5. Press User Application Synchronization
Wait until TV installs widget (SamyGO Extensions)...
Could take a while, depends from your internet speed. Wait until TV says "done"

NB! All other your widgets, installed from local server before were deleted!

6. Exit developer menu, exit SmartHub.

7. Return to SmartHub and you will find here new widget SamyGO. Execute it.

How To Use

Remote Shell

Remote shell of the current ES series is obtained through a reverse shell hack. Standard Telnet (telnetd) and SSH (sshd) daemon implementation have not yet been possible due to a crippled kernel FS, not allowing for proper /dev/pty devices.

This poses some strong limitations on the interactiveness of the shell. Basically, normal ANSI control sequences are not available, which means that you cannot edit command lines at all. You just have to retype everything. In addition, you do not receive any error shell messages either.

To connect to the shell we use netcat (nc) or telnet from a PC on the local network.

nc <your_tv_ip> 23

or

telnet <your_tv_ip> 23
How to use netcat to connect to SamsungTV on windows.

ExLink Shell

We have root shell on ExLink, but shell entry is currently crippled by only allowing HEX characters...

TBA

FTP

Connect using any FTP client to your TV`s port 21.

user     - not required, leave blank
password - not required, leave blank

References