Difference between revisions of "Rooting the ES-series"


From SamyGO
Jump to: navigation, search
m (Installing SamyGO Hack)
m (Installing SamyGO Hack)
Line 32: Line 32:
  
 
1. Start SmartHub<br>
 
1. Start SmartHub<br>
2. Go to Login (red or (A))<br>
+
2. Go to Login (red or "A")<br>
3. Go to Settings (blue or (D))-> Development -> '''Setting Server IP'''<br>
+
3. Go to Settings (blue or "D") -> Development -> '''Setting Server IP'''<br>
 
4. Enter this IP:
 
4. Enter this IP:
 
[[Image:Develop_ip.png|250px|thumb|left| ]]<br><br><br><br><br><br><br><br>
 
[[Image:Develop_ip.png|250px|thumb|left| ]]<br><br><br><br><br><br><br><br>
Line 39: Line 39:
  
 
Wait until TV installs widget (SamyGO Extensions)...<br>
 
Wait until TV installs widget (SamyGO Extensions)...<br>
Could take a while, depends from your internet speed. Wait until TV says "done"<br><br>
+
This could take a while, it depends on your internet speed. Wait until TV says "done".<br>
  
6. Exit developer menu, exit SmartHub.<br><br>
+
6. Exit developer menu, exit SmartHub.<br>
 
7. Remove any other USB devices connected to your TV. (You can connect them back later.)<br>
 
7. Remove any other USB devices connected to your TV. (You can connect them back later.)<br>
 
8. Insert USB stick. When the automatic selection menu appears, just cancel by hitting [EXIT].<br>
 
8. Insert USB stick. When the automatic selection menu appears, just cancel by hitting [EXIT].<br>
9. Return to SmartHub and you will find a new widget '''Test2'''. Execute it.<br><br>
+
9. Return to SmartHub and you will find a new widget '''Test2'''. Execute it.<br>
 
10. You will be greeted with a white screen that says "Press ENTER to continue", do so.<br>
 
10. You will be greeted with a white screen that says "Press ENTER to continue", do so.<br>
11. If your USB stick is done properly you will see:<br><br>
+
11. If your USB stick is made properly you will see:<br><br>
  
 
  Log:
 
  Log:
Line 53: Line 53:
 
  ModelName =USB Flash Drive
 
  ModelName =USB Flash Drive
 
  MountPatch=sda1
 
  MountPatch=sda1
  AvauilSize = <something>
+
  AvailSize = <something>
 
  TotalSize = <something>
 
  TotalSize = <something>
 
  ----------------------------
 
  ----------------------------
Line 59: Line 59:
  
 
<br>
 
<br>
12. Run your web browser two times! Hit [EXIT] after each time. The second time it should  
+
12. Hit [EXIT].
take about 10 seconds before starting. This means that your hack is working.<br><br>  
+
13. Run your web browser two times! Hit [EXIT] after each time. The second time it  
 +
should take about 10 seconds before starting. This means that your hack is working.<br><br>  
  
 
Done.
 
Done.

Revision as of 02:49, 20 December 2012

WARNING!

!! THIS PAGE IS WORK IN PROGRESS, DO NOT USE UNTIL THIS MESSAGE IS REMOVED !!

Due to the WIP status of this, we are working on a non-permanent rooting utility. The plan is to use a USB memory stick based rooting tool, that must be activated manually every time TV is started. Preferably it should be done by linking it to the useless "Family Story" button on the remote control.


Prepare the USB memory stick

<< TBA >>

Create the SMART-HUB developer account


1. Enter "SMART HUB" screen by pressing the smarthub button on the remote
2. Press the "TOOLS" button
3. Go to "Settings" entry in the Tools menu
3. Press "Create an account"
4. Enter the name: develop and any password (keep it simple this time)
5. EXIT "SMART HUB" and reboot TV

NB! If you can`t create account (option is greyed out)
Then go direct to Login (red or A) and enter:

user: develop
password: 111111 (or any other six digits as password)

Installing SamyGO Hack

NB! All your widgets, already installed will be deleted!

1. Start SmartHub
2. Go to Login (red or "A")
3. Go to Settings (blue or "D") -> Development -> Setting Server IP
4. Enter this IP:

Develop ip.png









5. Press User Application Synchronization

Wait until TV installs widget (SamyGO Extensions)...
This could take a while, it depends on your internet speed. Wait until TV says "done".

6. Exit developer menu, exit SmartHub.
7. Remove any other USB devices connected to your TV. (You can connect them back later.)
8. Insert USB stick. When the automatic selection menu appears, just cancel by hitting [EXIT].
9. Return to SmartHub and you will find a new widget Test2. Execute it.
10. You will be greeted with a white screen that says "Press ENTER to continue", do so.
11. If your USB stick is made properly you will see:

Log:
NumUSBs:1
VendorName: <something>
ModelName =USB Flash Drive
MountPatch=sda1
AvailSize = <something>
TotalSize = <something>
----------------------------
Now run web browser to continue


12. Hit [EXIT]. 13. Run your web browser two times! Hit [EXIT] after each time. The second time it should take about 10 seconds before starting. This means that your hack is working.

Done.

How To Use

Remote Shell

How to use netcat to connect to SamsungTV on windows.

Remote shell of the current ES series is obtained through a reverse shell hack. Standard Telnet (telnetd) and SSH (sshd) daemon implementation have not yet been possible due to a crippled kernel FS, not allowing for proper handling of /dev/pty devices.

This poses some strong limitations on the interactiveness of the shell. Basically, normal ANSI control sequences are not available, which means that you cannot edit command lines at all. You just have to retype everything. In addition, you do not receive any error messages either.

To connect to the shell we use netcat (nc) or telnet from a PC on the local network.

nc <your_tv_ip> 1023
or
telnet <your_tv_ip> 1023

For example:

nc 192.168.1.1 1023
shell> 

Done.

ExLink Shell

We have root shell on ExLink, but shell entry is currently crippled by only allowing HEX characters...

TBA

FTP

Connect using any FTP client to your TV`s port 21.

user     - not required, leave blank
password - not required, leave blank

References