Serial console

From SamyGO
Revision as of 03:53, 18 February 2013 by Arcadian2002 (talk | contribs) (Serial console for BD-E6100)
Jump to: navigation, search

To get the serial console, use the following connections on your unit PCB.

Remember that you need a TTL to RS232 adapter. See here : Ex-Link Cable for C/D/E Series and BD players

Serial console for BD-D6900...

D6900 serial00.jpg D6900 serial01.jpg

Serial console for BD-D8200, BD-D8500, BD-D8900


Serial console for BD-E8300, BD-E8500, BD-E8900, BD-E8909S


Serial console for BD-E6100

300px 300px

Guidelines for models that are not listed here

If your model is not listed here, you can try to locate the signals by yourself.

  • try to locate 'dead-end' resistors (one pad is not connected to anything)
  • the signals directly go to the ARM processor
  • the signals level is 3.3v when the console is idle
  • press INFO on the remote controller to generate traffic on the TX signal
  • using an oscilloscope will ease this task