Difference between revisions of "Top Debug Menu: TDM"
m |
m |
||
| Line 1: | Line 1: | ||
The hidden menu, accessible using special cable, so called ExLink.<br> | The hidden menu, accessible using special cable, so called ExLink.<br> | ||
| − | + | ||
| − | |||
To get to TOP debug menu, you need: | To get to TOP debug menu, you need: | ||
==ExLink cable== | ==ExLink cable== | ||
*[[Enable Serial Console on non CI+ Devices |Ex-Link Cable for B-Series]] | *[[Enable Serial Console on non CI+ Devices |Ex-Link Cable for B-Series]] | ||
*[[Ex-Link Cable for C/D Series | Ex-Link Cable for C/D/E Series and BD players]] | *[[Ex-Link Cable for C/D Series | Ex-Link Cable for C/D/E Series and BD players]] | ||
| − | * | + | ====Terminal Connection Parameters ==== |
| − | + | *Use following connection parameters with your terminal-client ( e.g. [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html putty], Kermit, Hyper Therminal or ZOC Terminal ): | |
| + | Baudrate: '''115200''' | ||
| + | Data bits: '''8''' | ||
| + | Parity: '''none''' | ||
| + | Stop bits: '''1''' | ||
| + | Flow Control: '''none''' | ||
| + | linux users need shell command 'cu' from ''uucp'' package. | ||
| + | cu -l /dev/ttyUSB0 -s 115200 | ||
==TV service menu settings== | ==TV service menu settings== | ||
*In service menu, '''enable Debug mode''' for the RS232 port: | *In service menu, '''enable Debug mode''' for the RS232 port: | ||
| Line 40: | Line 46: | ||
20089999 | 20089999 | ||
| + | == [ TOP Debug Menu ] == | ||
| + | |||
| + | ==================================== | ||
| + | [ TOP Debug Menu] | ||
| + | ------------------------------------ | ||
| + | 1 : SubSystem Print On/Off | ||
| + | 2 : Platform Print Setting | ||
| + | 3 : TD Print Setting | ||
| + | 4 : Performance Print Setting | ||
| + | 5 : Sdal Print Setting | ||
| + | 6 : Sdal Trace Setting | ||
| + | 10 : Factory Debug | ||
| + | 11 : TD Debug | ||
| + | 12 : SubSystem DBG | ||
| + | 20 : Performance File Write | ||
| + | 21 : Louvre Print Setting | ||
| + | 22 : JavaMW Print Setting | ||
| + | 30 : Auto Lock DBG | ||
| + | ------------------------------------ | ||
| + | 50 : ROSE Debug | ||
| + | 60 : MediaLink Debug | ||
| + | 70 : Jade Debug | ||
| + | ==================================== | ||
| + | 99 : Exit | ||
| + | ==================================== | ||
| + | DBG> : | ||
<To be updated> | <To be updated> | ||
Revision as of 16:59, 29 May 2012
The hidden menu, accessible using special cable, so called ExLink.
To get to TOP debug menu, you need:
Contents
ExLink cable
Terminal Connection Parameters
- Use following connection parameters with your terminal-client ( e.g. putty, Kermit, Hyper Therminal or ZOC Terminal ):
Baudrate: 115200 Data bits: 8 Parity: none Stop bits: 1 Flow Control: none
linux users need shell command 'cu' from uucp package.
cu -l /dev/ttyUSB0 -s 115200
- In service menu, enable Debug mode for the RS232 port:
- With TV switched off, press the following sequence on the remote:
- UE,LE models:[INFO] [MENU] [MUTE] [POWER]
- UN,UA models:[MUTE] 1 8 2 [POWER]
- UE,LE models:[INFO] [MENU] [MUTE] [POWER]
- Enter the Control menu and set the value of the RS232 mode to Debug.
- Once you're back to the main Service menu, you will have to power off the TV for normal operation.
Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
Console unlock and TDM codes
First code unlocks console, the second is the key for TDM.
B series
debug 1198282
C series
10041004 20089999
D series
- ARM:
23331003 20089999
- Mstar:
1198282 20089999
- BD
20102011 20089999
E series
- BD
not required/unknown 20089999
[ TOP Debug Menu ]
==================================== [ TOP Debug Menu] ------------------------------------ 1 : SubSystem Print On/Off 2 : Platform Print Setting 3 : TD Print Setting 4 : Performance Print Setting 5 : Sdal Print Setting 6 : Sdal Trace Setting 10 : Factory Debug 11 : TD Debug 12 : SubSystem DBG 20 : Performance File Write 21 : Louvre Print Setting 22 : JavaMW Print Setting 30 : Auto Lock DBG ------------------------------------ 50 : ROSE Debug 60 : MediaLink Debug 70 : Jade Debug ==================================== 99 : Exit ==================================== DBG> :
<To be updated>
