Difference between revisions of "Top Debug Menu: TDM"
m |
m (+ e series mstar unlock code) |
||
| Line 53: | Line 53: | ||
*ARM, (tested on 7 and 8 series) | *ARM, (tested on 7 and 8 series) | ||
20102011 | 20102011 | ||
| + | 20089999 | ||
| + | *Mstar: | ||
| + | 1198282 | ||
20089999 | 20089999 | ||
*BD | *BD | ||
Revision as of 17:11, 1 June 2012
The hidden menu, accessible using special cable, so called ExLink.
Required steps to get to TOP debug menu:
Contents
- In service menu, enable Debug mode for the RS232 port:
- With TV switched off, press the following sequence on the remote:
- UE,LE models:[INFO] [MENU] [MUTE] [POWER]
- UN,UA models:[MUTE] 1 8 2 [POWER]
- UE,LE models:[INFO] [MENU] [MUTE] [POWER]
- Enter the Control menu and set the value of the RS232 mode to Debug.
- Once you're back to the main Service menu, you will have to power off the TV for normal operation.
Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
ExLink cable
Terminal Connection Parameters
- Use following connection parameters with your terminal-client ( e.g. putty, Kermit, Hyper Therminal or ZOC Terminal ):
Baudrate: 115200 Data bits: 8 Parity: none Stop bits: 1 Flow Control: none
Start the terminal
Linux PC
On a Linux PC, install 'cu' (call up) tool from the uucp package and run
cu -l /dev/ttyUSB0 -s 115200
Windows PC
On a Windows PC, use Hyper Terminal or Putty.
After you have started PuTTY, follow the steps in the screen shots below.
Console unlock and TDM codes
First code unlocks console, the second is the key for TDM.
B series
debug 1198282
C series
10041004 20089999
D series
- ARM:
23331003 20089999
- Mstar:
1198282 20089999
- BD
20102011 20089999
E series
- ARM, (tested on 7 and 8 series)
20102011 20089999
- Mstar:
1198282 20089999
- BD
20102011 20089999
[ TOP Debug Menu ]
==================================== [ TOP Debug Menu] ------------------------------------ 1 : SubSystem Print On/Off 2 : Platform Print Setting 3 : TD Print Setting 4 : Performance Print Setting 5 : Sdal Print Setting 6 : Sdal Trace Setting 10 : Factory Debug 11 : TD Debug 12 : SubSystem DBG 20 : Performance File Write 21 : Louvre Print Setting 22 : JavaMW Print Setting 30 : Auto Lock DBG ------------------------------------ 50 : ROSE Debug 60 : MediaLink Debug 70 : Jade Debug ==================================== 99 : Exit ==================================== DBG> :
<To be updated>
