Difference between revisions of "Recovery of Bricked Device"
m |
|||
| Line 6: | Line 6: | ||
3) Enable NAND support. Commands | 3) Enable NAND support. Commands | ||
| − | + | # insmod /lib/modules/fsr.ko | |
# insmod /lib/modules/rfs.ko | # insmod /lib/modules/rfs.ko | ||
| − | # insmod /lib/modules/fsr_stl.ko | + | # insmod /lib/modules/fsr_stl.ko |
4) Erase old bad image. Command "bml.erase /dev/bml0/7" | 4) Erase old bad image. Command "bml.erase /dev/bml0/7" | ||
Revision as of 10:40, 8 January 2010
If you write bad boot.img to tv.
1) Connect to TV by ex-link cable.
2) Enable USB support. Command "/lib/modules/rc.local"
3) Enable NAND support. Commands
# insmod /lib/modules/fsr.ko # insmod /lib/modules/rfs.ko # insmod /lib/modules/fsr_stl.ko
4) Erase old bad image. Command "bml.erase /dev/bml0/7"
5) Write original (work) image. Command "bml.restore /dev/bml0/7 /dtv/usb/sd1/boot.img"
It all!!! Happy new Year.
