Difference between revisions of "Patched firmware"


From SamyGO
Jump to: navigation, search
m (→‎File:Cinavia_logo.gif: cinavia patch HEX mathematics. Missing packing-replacing-flashing steps.)
m (→‎Enter this IP:250px|thumb|left|)
 
(49 intermediate revisions by 3 users not shown)
Line 4: Line 4:
 
'''Precheck:'''<br>
 
'''Precheck:'''<br>
 
{{red|If you never touched OTN in service menu '''there is no reason to change anything now.''' You can skip this step!!!!!}}<br>
 
{{red|If you never touched OTN in service menu '''there is no reason to change anything now.''' You can skip this step!!!!!}}<br>
−
*Access [[Service_Menu#Accessing_the_menu| Service menu]]
+
*Access '''[[Service_Menu#Accessing_the_menu| Service menu]]'''
 
*Enter the '''Control'''-'''SubOption''' menu and set the values:
 
*Enter the '''Control'''-'''SubOption''' menu and set the values:
 
::*OTN to '''enabled'''.
 
::*OTN to '''enabled'''.
 
::*OTN type '''operating'''
 
::*OTN type '''operating'''
−
'''{{red|Caution!}}''' RC Keys '''Up'''&'''Down''' arrows make selections, while '''Right'''&'''Left''' arrows {{red|make changes}}. You needed to backup previous value before changing any option. Some options cannot be reverted once changed. The service menu has a protected 'advanced' submenu. Press the '''0''' button four times on advanced to enter the hidden menu. Before touching any setting, please note the original value. The menu settings are listed (with their default values?) in the [[Service Manuals]].<br><br>
+
'''{{red|Caution!}}''' RC Keys '''Up'''&'''Down''' arrows make selections, while '''Right'''&'''Left''' arrows {{red|make changes}}. You needed to backup previous value before changing any option. Some options cannot be reverted once changed. The service menu has a protected 'advanced' submenu. Press the '''0''' button four times on advanced to enter the hidden menu. Before touching any setting, please note the original value. The menu settings are listed (with their default values?) in the '''[[Service Manuals]]'''.<br><br>
 
'''Installing firmware'''
 
'''Installing firmware'''
 
*Set dns (depends on you network setup on tv or/and on your router) to:  
 
*Set dns (depends on you network setup on tv or/and on your router) to:  
−
[[File:Develop_ip.png]]
+
[[File:Server_ip.png]]
 
*Switch tv off and on again
 
*Switch tv off and on again
 
*Check from tv's menu for firmware update via internet
 
*Check from tv's menu for firmware update via internet
Line 19: Line 19:
 
*If you get an error at ~90% of install process turn tv off for ~3min and try again
 
*If you get an error at ~90% of install process turn tv off for ~3min and try again
 
*If no firmware are shown -> report it (not to Samsung but here in SUPPORT forum)
 
*If no firmware are shown -> report it (not to Samsung but here in SUPPORT forum)
−
*'''Set your dns back to normal operational''' (if you don't do this your device will be banned after 2 days on server due senseless filling up of logfiles)
+
*'''Set your dns back to normal operational''' (if you don't do this your device will be banned after 2 days on server due senseless filling up of log files)
 
*Turn tv off and on again
 
*Turn tv off and on again
 
*Don't forget to disable further firmware updates!!! ('''Samsung won't make any technical improvements in new firmwares''')
 
*Don't forget to disable further firmware updates!!! ('''Samsung won't make any technical improvements in new firmwares''')
Line 29: Line 29:
 
1. ''Original firmware:'' T-VAL6DEUC-1016.0<br>
 
1. ''Original firmware:'' T-VAL6DEUC-1016.0<br>
 
2. ''Features:''<br>
 
2. ''Features:''<br>
−
* Execute own script during TV boot:{{small| (from root of fat32 formatted usb.)}}
+
* Executing own script during TV boot:{{small| (from root of fat32 formatted usb.)}}
 
  /SamyGO/rcSGO
 
  /SamyGO/rcSGO
−
* Full unrestricted shell trough [[Ex-Link_Cable_for_C/D/E_Series_and_BD_players | Exlink]] {{small|(Symbol filtration at kernel level removed)}}
+
* Full unrestricted shell trough '''[[Ex-Link_Cable_for_C/D/E_Series_and_BD_players | Exlink]]''' {{small|(Symbol filtration at kernel level removed)}}
 
* Custom autostart - {{red |for advanced users only!}}. Ask on forum!<br>
 
* Custom autostart - {{red |for advanced users only!}}. Ask on forum!<br>
 
3. ''Installation:'' <br>
 
3. ''Installation:'' <br>
−
Use [[Patched_firmware#SamyGO_DNS_service|SamyGO DNS service]] to get patched firmware installed.<br>
+
Use '''[[Patched_firmware#SamyGO_DNS_service|DNS trick]]''' to get patched firmware installed.<br>
 
4. ''How to use:'' <br>
 
4. ''How to use:'' <br>
 
To have SamyGO running on TV, You should download, extract (and overwrite existing files):
 
To have SamyGO running on TV, You should download, extract (and overwrite existing files):
Line 41: Line 41:
 
  3. SamyGO-libs-T-VALDEUC-20110123101934
 
  3. SamyGO-libs-T-VALDEUC-20110123101934
 
  4. SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip
 
  4. SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip
−
Required files are to be downloaded from [http://download.samygo.tv/C%20Series/For%20ARM%20CPUs/ download area]
+
Required files are to be downloaded from '''[http://download.samygo.tv/C%20Series/For%20ARM%20CPUs/ download area]'''
 
== T-VALAUSC ==
 
== T-VALAUSC ==
 
''Original firmware:'' T-VALAUSC-1035.0<br>
 
''Original firmware:'' T-VALAUSC-1035.0<br>
−
''Features'', ''installation'' and ''usage'': same as [[Patched_firmware#T-VAL6DEUC | T-VAL6DEUC]], except you don`t need modules from VAL6DEUC (p.4)
+
''Features'', ''installation'' and ''usage'': same as '''[[Patched_firmware#T-VAL6DEUC | T-VAL6DEUC]]''', except you don`t need modules from VAL6DEUC (p.4)
  
 
= '''D series TV`s''' =
 
= '''D series TV`s''' =
−
To be updated
+
On SamyGO-Patched Firmware the '''[[SamyGO Extensions Pack]]''' are auto-started during boot (see following list)
 +
==T-GAP8AKUC_001118 (real version: 1018.4)==
 +
*USB-Hotplug: execute script run.sh from usb on insertion
 +
*Starts '''/mtd_rwarea/user.sh''' if exists (instead of exeDSP start from rc.local)
 +
*Unlimited shell trough ExLink unlocked
 +
*PVR to fat32 formatted USB
 +
 
 
= '''E series TV`s''' =
 
= '''E series TV`s''' =
−
== T-MST10DEUC ==
+
==T-MST10DEUC 1030.0==
−
T-MST10DEUC-1030.0<br>
+
*'''[[SamyGO Extensions Pack]]''' is included ('''/usr/SamyGO/SamyGO''') and auto-started on boot
−
To be updated
+
 
−
== T-ECPDEUC ==
+
==T-ECPDEUC 2003.4==
−
T-ECPDEUC-2003.4<br>
+
*SamyGO HD-Logo
−
To be updated
+
*'''[[SamyGO Extensions Pack]]''' is included ('''/usr/SamyGO/SamyGO''') and auto-started on boot
 +
 
 
= '''BluRay players''' =
 
= '''BluRay players''' =
−
== B-FIRHTBEUC ==
+
=== Installing '''[[SamyGO Extensions Pack]]''' ===
−
B-FIRHTBEUC-1016.3<br>
+
====Go to Settings (blue or (D))-> Development -> '''Setting Server IP'''====
−
To be updated
+
====Enter this IP:<br>[[Image:Server_ip.png|250px|thumb|left| ]]====
−
= '''exeDSP Patches''' =  
 
−
== [[File:Cinavia_logo.gif]] ==
 
−
A Digital Rights Management (DRM) system utilizing audio watermaking technology created by verance that can detect when an illegal
 
−
movie download / pirate DVD is being played on a PlayStation 3 (PS3) console and modern Blu-ray stand-alone players on  the market.
 
−
Content protected by this technology carry inaudible codes (the watermark) embedded in the audio tracks by the owner of the copy-
 
−
right that indicate how and where they are to be used.
 
−
{{small | When such a movie is played back on a player with Cinavia detection the players firmware will detect the watermark and check if the device has been authorized for the watermark. If there isn't authorization for the device a message will be displayed saying that the content is protected by Cinavia and not authorized for playback on the device.
 
−
Cinavia DRM has been added to all new BD players beginning the first quarter, 2010.[http://www.afterdawn.com/glossary/term.cfm/cinavia]}}
 
  
−
{{red |'''This patch will let you playback your *LEGIT* movie copies, without Cinavia interrupting, and is provided for educational purposes only.<br/>We're not at all responsible if your TV/BD explodes!'''}}
+
====Press '''User Application Synchronization'''====
−
<br>
+
Wait until TV installs widget (SamyGO Extensions)...
−
[[File:B-FIRHTBEUC_1016.3_exedsp_cynavia_free.png]]
+
Could take a while, depends from your internet speed. Wait until TV says "done"
 +
NB! All other your widgets, installed from local server before were deleted!
 +
====Exit developer menu, exit SmartHub.====
 +
===On SamyGO-Patched Firmware the [[SamyGO Extensions Pack]] are auto-started during boot (see following list) ===
 +
====B-FIRHRDEUC_001107 (real version: 1007.0)====
 +
*USB-Hotplug: execute script run.sh from usb on insertion
  
−
© '''[http://forum.samygo.tv/memberlist.php?mode=viewprofile&u=19316 theos0o]'''
+
====B-FIRHTBEUC_001112 (real version: 1012.2)====
−
----
+
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
−
<font size="3">'''Instruction'''</font size>
+
*Starts '''/mtd_rwarea/myBoot.sh''' if present instead of exeDSP start-script (original Samsung "Hack")
  
−
1. Root your device using [[Patched_firmware#SamyGO_DNS_service | DNS trick]]<br>
+
====B-FIRHTBEUC_001116 (real version: 1016.3)====
−
2. Download firmware from Samsung support page<br>
+
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
−
3. Decrypt firmware with [http://sourceforge.net/p/samygo/code/1243/tree/patcher/trunk SamyGO Firmware patcher] (example):
+
*Starts '''/mtd_rwarea/myBoot.sh''' if present insead of exeDSP start-script (origial Samsung "Hack")
−
SamyGO.py decrypt_all ./B-FIRHRTBEUC
+
*Starts '''/mtd_rwarea/user.sh''' if present insead of exeDSP start-script
−
4. Extract exeDSP binary from decrypted exe.img. Here are different ways to do that, you can mount exe.img as squashfs image file or open it in 7zip<br>
 
−
5. Open exeDSP in HEX editor and search for hex string:
 
−
10 80 BD E8 08 40 2D E9 04 00 50 E3 00 {{red|'''F1 9F 97'''}}
 
−
Replace last three bytes ('''F1 9F 97''') to '''00 A0 E1'''. Result must look like:
 
−
10 80 BD E8 08 40 2D E9 04 00 50 E3 00 {{red|'''00 A0 E1'''}}
 
−
6. Save patched exeDSP<br>
 
−
7. To be udated (How To correctly replace patched exeDSP and flash it back to device. {{red|Anyone?}} :))
 
  
 +
====B-FIRURDEUC_001103 (real version: 1003.2)====
 +
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
  
−
Patch tested and works well on B-FIRHTBEUC_1016.3. Patch expected to work on all FIR* based devices. Checked on IDA, but not tested on devices yet:
+
====B-FIRBP7WWC_001671 (real version: 1004.x)====
−
B-FIRBPEWWC 1053.2
+
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
−
B-FIRHRDEUC-1012.3
+
*Starts '''/mtd_rwarea/user.sh''' if present insead of exeDSP start-script
−
B-FIRHTSWWC 1012.3
 
−
B-FIRURDEUC 1012.0
 
−
B-FIRBP7WWC 1010.0
 
  
−
----
+
= '''[[ExeDSP_modifications | exeDSP Patches]]''' =
 +
Please read '''[[ExeDSP_modifications | more...]]'''
  
 
=References=
 
=References=
 
Related samygo.tv forum topics:<br>
 
Related samygo.tv forum topics:<br>
 
#[B series]<br>
 
#[B series]<br>
−
#[http://forum.samygo.tv/viewtopic.php?f=10&t=2255 C series]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=10&t=2255 C series]'''<br>
−
#[http://forum.samygo.tv/viewtopic.php?f=22&t=4199 D series]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=22&t=4199 D series]'''<br>
−
#[http://forum.samygo.tv/viewtopic.php?f=50&t=4313 E series]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=50&t=4313 E series]'''<br>
−
#[http://forum.samygo.tv/viewtopic.php?f=18&t=4244 BluRay players]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=18&t=4244 BluRay players]'''<br>

Latest revision as of 12:40, 25 June 2015

Work in progress!

SamyGO DNS service

Is used only for Firmware downgrade and Patched firmware installation on C/D/E series for supported models only. You further acknowledge and agree that we are not responsible or liable, directly nor indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, site or resource.

Precheck:
If you never touched OTN in service menu there is no reason to change anything now. You can skip this step!!!!!

  • Access Service menu
  • Enter the Control-SubOption menu and set the values:
  • OTN to enabled.
  • OTN type operating

Caution! RC Keys Up&Down arrows make selections, while Right&Left arrows make changes. You needed to backup previous value before changing any option. Some options cannot be reverted once changed. The service menu has a protected 'advanced' submenu. Press the 0 button four times on advanced to enter the hidden menu. Before touching any setting, please note the original value. The menu settings are listed (with their default values?) in the Service Manuals.

Installing firmware

  • Set dns (depends on you network setup on tv or/and on your router) to:

Server ip.png

  • Switch tv off and on again
  • Check from tv's menu for firmware update via internet
  • Install firmware if it detects one

Notes:

  • If you get an error at ~90% of install process turn tv off for ~3min and try again
  • If no firmware are shown -> report it (not to Samsung but here in SUPPORT forum)
  • Set your dns back to normal operational (if you don't do this your device will be banned after 2 days on server due senseless filling up of log files)
  • Turn tv off and on again
  • Don't forget to disable further firmware updates!!! (Samsung won't make any technical improvements in new firmwares)

B series TV`s

To be updated

C series TV`s

T-VAL6DEUC

1. Original firmware: T-VAL6DEUC-1016.0
2. Features:

  • Executing own script during TV boot: (from root of fat32 formatted usb.)
/SamyGO/rcSGO
  • Full unrestricted shell trough Exlink (Symbol filtration at kernel level removed)
  • Custom autostart - for advanced users only!. Ask on forum!

3. Installation:
Use DNS trick to get patched firmware installed.
4. How to use:
To have SamyGO running on TV, You should download, extract (and overwrite existing files): 

1. SamyGO-All-Extensions-v0.03.6-r12-for-T-VALDEUC-20110103184650
2. SamyGO-All-Extensions-Bugfix-v0.03.6-r15-for-valencia-20111001120232
3. SamyGO-libs-T-VALDEUC-20110123101934
4. SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip

Required files are to be downloaded from download area

T-VALAUSC

Original firmware: T-VALAUSC-1035.0
Features, installation and usage: same as T-VAL6DEUC, except you don`t need modules from VAL6DEUC (p.4)

D series TV`s

On SamyGO-Patched Firmware the SamyGO Extensions Pack are auto-started during boot (see following list)

T-GAP8AKUC_001118 (real version: 1018.4)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/user.sh if exists (instead of exeDSP start from rc.local)
  • Unlimited shell trough ExLink unlocked
  • PVR to fat32 formatted USB

E series TV`s

T-MST10DEUC 1030.0

T-ECPDEUC 2003.4

BluRay players

Installing SamyGO Extensions Pack

Go to Settings (blue or (D))-> Development -> Setting Server IP

Enter this IP:
Server ip.png

Press User Application Synchronization

Wait until TV installs widget (SamyGO Extensions)... Could take a while, depends from your internet speed. Wait until TV says "done" NB! All other your widgets, installed from local server before were deleted!

Exit developer menu, exit SmartHub.

On SamyGO-Patched Firmware the SamyGO Extensions Pack are auto-started during boot (see following list)

B-FIRHRDEUC_001107 (real version: 1007.0)

  • USB-Hotplug: execute script run.sh from usb on insertion

B-FIRHTBEUC_001112 (real version: 1012.2)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/myBoot.sh if present instead of exeDSP start-script (original Samsung "Hack")

B-FIRHTBEUC_001116 (real version: 1016.3)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/myBoot.sh if present insead of exeDSP start-script (origial Samsung "Hack")
  • Starts /mtd_rwarea/user.sh if present insead of exeDSP start-script

B-FIRURDEUC_001103 (real version: 1003.2)

  • USB-Hotplug: execute script run.sh from usb on insertion

B-FIRBP7WWC_001671 (real version: 1004.x)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/user.sh if present insead of exeDSP start-script

exeDSP Patches

Please read more...

References

Related samygo.tv forum topics:

  1. [B series]
  2. C series
  3. D series
  4. E series
  5. BluRay players
Retrieved from "http://wiki.samygo.tv/index.php?title=Patched_firmware&oldid=4295"