Difference between revisions of "Boot from USB using u-boot"
m (moved Boot From USB to Boot from USB on non CI+ Devices: Boot From USB on non CI+ Devices) |
|||
| Line 1: | Line 1: | ||
| − | '''Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only | + | '''Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only supported devices''' |
Requirements: | Requirements: | ||
| Line 7: | Line 7: | ||
* Usb disk drive or pen drive (at least 256MB) | * Usb disk drive or pen drive (at least 256MB) | ||
* TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive | * TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive | ||
| + | |||
| + | |||
| + | '''Instruction is in progress.''' | ||
Revision as of 10:00, 16 March 2010
Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only supported devices
Requirements:
- Serial connection by enable serial debug console
- Get access to bootloader, refer to instructions here Access to Bootloader
- Usb disk drive or pen drive (at least 256MB)
- TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive
Instruction is in progress.
