Difference between revisions of "Boot from USB using u-boot"
| Line 1: | Line 1: | ||
| − | '''Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series | + | '''Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only support''' |
| + | |||
| + | Requirements: | ||
| + | |||
| + | * Serial connection by enable [http://wiki.samygo.tv/index.php?title=Enable_Serial_Console_on_non_CI%2B_Devices serial debug console] | ||
| + | * Get access to bootloader, refer to instructions here [http://wiki.samygo.tv/index.php?title=Getting_access_to_uBoot_/_bootloader Access to Bootloader] | ||
| + | * Usb disk drive or pen drive (at least 256MB) | ||
| + | * TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive | ||
Revision as of 09:52, 16 March 2010
Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only support
Requirements:
- Serial connection by enable serial debug console
- Get access to bootloader, refer to instructions here Access to Bootloader
- Usb disk drive or pen drive (at least 256MB)
- TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive
