Difference between revisions of "Boot from USB using u-boot"
| Line 6: | Line 6: | ||
* Get access to bootloader, refer to instructions here [http://wiki.samygo.tv/index.php?title=Getting_access_to_uBoot_/_bootloader Access to Bootloader] | * Get access to bootloader, refer to instructions here [http://wiki.samygo.tv/index.php?title=Getting_access_to_uBoot_/_bootloader Access to Bootloader] | ||
* Usb disk drive or pen drive (at least 256MB) | * Usb disk drive or pen drive (at least 256MB) | ||
| − | * TFTP Daemon on some host to optionaly load kernel over network or in case | + | * TFTP Daemon on some host to optionaly load kernel over network or in case pen drive usage |
| − | '''Instruction is in progress | + | '''Instruction is in progress!''' |
Revision as of 10:00, 16 March 2010
Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only supported devices
Requirements:
- Serial connection by enable serial debug console
- Get access to bootloader, refer to instructions here Access to Bootloader
- Usb disk drive or pen drive (at least 256MB)
- TFTP Daemon on some host to optionaly load kernel over network or in case pen drive usage
Instruction is in progress!
