Difference between revisions of "Engineering Codes"
(MicomCtrl) |
|||
| Line 19: | Line 19: | ||
* RETURN for 10 secs -> Internal diagnostics and report | * RETURN for 10 secs -> Internal diagnostics and report | ||
* EXIT for 10 secs -> Factory reset (also TV channels has to be re-tuned) | * EXIT for 10 secs -> Factory reset (also TV channels has to be re-tuned) | ||
| + | |||
| + | Its also valuable information that MicomCtrl programs functions. | ||
| + | */mtd_boot/MicomCtrl 18 # for a shutdown | ||
| + | */mtd_boot/MicomCtrl 23 # for a kill watchdog of exeDSP | ||
| + | */mtd_boot/MicomCtrl 123 # for a reboot | ||
Revision as of 07:02, 19 October 2009
This page lists the available special (undocumented) TV remote key combinations for the TV. Some of them are decoded from the symbol information of the exeDSP program. WARNING! Some of these codes are not tested and may be dangerous.
- POWER (off) INFO MENU MUTE POWER (on) -> Service Menu
- POWER (off) MUTE 1 8 2 POWER (on) -> Service Menu on older models
- POWER (off) MUTE 8 2 4 POWER (on) -> pin reset
- MUTE 1 1 9 OK -> "HotelFactory"
- MUTE 1 2 0 EXIT -> "LEDDemo" (didn't seem to do anything?)
- MUTE 1 8 4 EXIT -> "DV"
- MUTE 1 8 5 EXIT -> ?
- MUTE 1 8 7 EXIT -> "DSG" (some HDMI test)
- MUTE 7 3 7 OK -> "PDPFactory"
- MUTE 7 5 0 EXIT -> "FlashPlayerDemo" (goes to content library screen)
- MUTE 9 4 8 EXIT -> "YahooFactoryReset" (resets widgets)
- MUTE OK MUTE OK -> "InfoLinkDemo"
- MUTE ["RSS" key?] -> "ControlPanelVoltage"
- INFO [unknown key with code 0x3B] -> "Factory"
- INFO 3 2 1 EXIT -> "Calibration"
- INFO for 10 secs -> Digital signal quality information
- RETURN for 10 secs -> Internal diagnostics and report
- EXIT for 10 secs -> Factory reset (also TV channels has to be re-tuned)
Its also valuable information that MicomCtrl programs functions.
- /mtd_boot/MicomCtrl 18 # for a shutdown
- /mtd_boot/MicomCtrl 23 # for a kill watchdog of exeDSP
- /mtd_boot/MicomCtrl 123 # for a reboot
