How to enable Telnet on samsung TV's

(by dynamic1969, edits and extensions by marcelr, erdem_ua, suggestions by olivluca, grajen)

If you are a novice, then I recommend you take some time to read and understand what you are doing first! THIS CAN BRICK YOUR DEIVCE !!

Read below for a detailed HowTo of the steps taken :

Prerequisites

(if you do not have ALL of these: Google is your friend, at least for the software):

• a Samsung TV attached to your local network.
• a hex editor.
  • Linux : okteta and many others
  • Windows: flexhex, neo, and many others.
  • Mac :
• a crc32 checksum calculator.
  • Linux : okteta 0.3 or later, check, minicrc and many others
  • Windows: flexhex, be wary of little endian (byte-reversed) checksums, possibly others
  • Mac :
• xor encryption/decryption software.
  • Linux : okteta 0.3 or later, crypt-xor, possibly others. I wrote my own ...
  • Windows: flexhex, possibly others
  • Mac :
• a normal ASCII editor.
  • Linux : emacs, vi, gedit and and many more.
  • Windows: notepad (Or a word processor. Be careful to save in ascii mode, .txt format)
  • Mac :
• a telnet client.

Hacking the Firmware

To acquire telnet access to your tv, do the following:

• Download the firmware package for your tv from the Samsung website and unpack it. As an example in this HOWTO, the T-CHU7DEUC.exe file for a ue40b70xx is taken. This will also work on any other xor-encoded firmware. Just replace the T-CHU7DEUC in this howto with your firmware name. When working on a linux box, you can unpack it with wine or unrar.
• Decrypt exe.img.enc in the T-CHU7DEUC/image directory using an xor decrypter with key "T-CHU7DEUC" (the firmware root directory name) and name it exe.img
• Check the CRC32 checksum of your decrypted file (exe.img). It should match the checksum (8-digit hexadecimal number), <xxxxxxxx> given in validinfo.txt _exactly_:

*007_exe.img_xxxxxxxx*011_appdata.img_126fb41f 

If the checksums don't match, check the following: Is the downloaded file not corrupted? Is your decryption flawless?

• Using a hex-editor, make the following changes to the contents of rc.local in the decrypted exe.img file: locate the lines:

export KF_LOG=/dev/null #Remove engine logging.
cd /mtd_exe/

./exeDSP

and replace just the text element marked bold, as shown below:

export KF_LOG=/dev/null;/etc/telnetd_start.sh&
cd /mtd_exe/

./exeDSP

-> For safety reasons it is recommended that you don't miss the "&" at the end ( this is not yet considered in the SamyGo Script YET! )

Make sure you do not change the length of the image file. To be on the safe side, replace any unprintable characters on the changed line with spaces, but _keep_ the linefeed (0x0a)

And remember: Think before you type.

• Re-calculate the CRC32 checksum for the updated image.
• Using a normal ASCII editor, update validinfo.txt in the T-CHU7DEUC/image directory with the new CRC information: Replace xxxxxxxx in this line with the newly calculated checksum (8 hexadecimal digits, be aware of leading zeros):

*007_exe.img_xxxxxxxx*011_appdata.img_126fb41f

• Encrypt exe.img again, using xor encryption with key "T-CHU7DEUC" and copy it into the T-CHU7DEUC/image directory. Name it "exe.img.enc"

Flash to TV

• Move the T-CHU7DEUC directory and all of its contents to an otherwise empty USB drive, plugin the USB drive into your TV and manually start the upgrade via the appropriate menu entry on your TV

Result

• After upgrade, open a shell and start a telnet session on your tv:

$ telnet aaa.bbb.ccc.ddd

with aaa.bbb.ccc.ddd your tv's IP-address. when prompted, log in as <root> This is what you'll see, when connected:

$ telnet aaa.bbb.ccc.ddd
Trying aaa.bbb.ccc.ddd...
Connected to aaa.bbb.ccc.ddd.
Escape character is '^]'.

localhost login: root
-sh: id: not found
#

You can now start typing commands. For available commands visit the normal places: /bin, /sbin, /usr/bin and /usr/sbin

Automated Way

• If you know what you are doing and are simply looking for a tool that will do all of the hacking for you, then you can use SamyGO script (requires python installed on your system) to make all modifications to your firmware. This will produce an exe.img ready to #Flash to TV.

The Safe Way

• Using SamyGO Telnet Enabler Samsung TV application, you can enable telnet of TV without changing firmware.

Enabling telnet with this program is not dangerous but with wrong telnet commands, still you have a chance to brick your TV. Download this program to your USB Flash, than plug it to TV. Using Content Library from Pup-Up menu, select USB, than under Game menu, select and start SamyGO application once. TV will goes black than returns to menu. This will enable your TV's telnet for once. When you reboot your tv (turn of and on) you needed to reopen telnet via menus. I advice you to use Automated script if you make some development on TV. For take a look, Safe Way is better. Download SamyGO Telnet Enabler Program.