Difference between revisions of "UnBricking TV by EEPROM Reset"
(Added BD-D8X00 & BD-E8X00) |
|||
| Line 61: | Line 61: | ||
<br> | <br> | ||
==BD EEPROM Location== | ==BD EEPROM Location== | ||
| − | ===BD- | + | ===BD-D8X00=== |
<gallery> | <gallery> | ||
Image:Bd-d8900_Board.png|BD-D8900 Board | Image:Bd-d8900_Board.png|BD-D8900 Board | ||
Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way | Image:Bd-d8900_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way | ||
| + | </gallery> | ||
| + | |||
| + | ===BD-E8X00=== | ||
| + | <gallery> | ||
| + | Image:Bd-e8300_Board.png|BD-D8900 Board | ||
| + | Image:Bd-e8300_Eprom.png|BD-D8900 EEPROM Chip and UnBrick way | ||
</gallery> | </gallery> | ||
Revision as of 15:19, 11 September 2012
This is Erdem. As I bricked my D series device by miss service menu setting, I search for solutions to recover it. After with help of Jusiz we unbricked device with the same way of C series TVs...
Here I wanted to try to let you know how the process is working.
Firstly, this hack doesn't work if you bricked you device by firmware flashing... This hacks just removes service menu settings and let you give another chance to fix settings...
Also you needed to find correct values for your TV after resetting NVRAM like Model / Type / Tuner / Font Color and others. It's better to have screen shots of your service menu. You can also ask help from our forums.
EEPROM
EEPROM is a short of electrically erasable programmable read only memory, which is actually a chip. In Samsung TVs, all service menu settings kept there. You can delete and reprogram this chips millions time. So they are fast and reliable...
Reseting NVRAM (EEPROM)
For resetting TV, settings, you needed to remove EEPROM device from TV. But it's not required. In electronic world, if you disable communication of the chip, it counts as removed. So we just needed to kill communication of EEPROM. EEPROM on Samsung TV's communicating via common i2c protocol. That protocol carries data via SDA line and send clocks via SCL line. In our situation, both blocking SCL or SDA will works. But I decide SDA.
To do this, all you have to do that feeding (connecting) GND (ground) or VCC (3.3v) to SDA line with little wire... That's all. Since this lines are HIGH (v3.3) in IDLE, its better to hold it via VCC. You can also hold this lines via GND too. But don't try to connect both GND and VCC. It will be short circuit and probably will damage your board.
Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.
Where can I found that EEPROM chip ?
- Its located near CPU at C and D series. On top, it writes some numbers and letters starting with 24256 or 24512... Here I place some screen shots from D series bellow. In my TV, 24512 EEPROM chip used. You can get the 24512 Chip Datasheet here. In picture, white triangle shows the first pin.
C Series EEPROM Location
LExx550/530
LAxxC650
UAxxC6200
OTHER
please fill up missing models. Thanks!
D Series EEPROM Location
D5000
UE40D5000 Board
UE40D5000 EEPROM Chip and UnBrick way
D4003/5003
UE40D5003 Board
UE40D5003 EEPROM Chip and UnBrick way
D60xx/61xx/62xx/63xx/64xx/65xx/66xx/67xx/68xx
UA40D6000 Board
UA40D6000 EEPROM Chip and UnBrick way
BD EEPROM Location
BD-D8X00
BD-D8900 Board
BD-D8900 EEPROM Chip and UnBrick way
BD-E8X00
BD-D8900 Board
BD-D8900 EEPROM Chip and UnBrick way
