Serial console


From SamyGO
Revision as of 18:11, 10 June 2012 by Oga83 (talk | contribs) (Created page with "To get the serial console, use the following connections on your unit PCB. Remember that you need a TTL to RS232 adapter. See here : [[Ex-Link Cable for C/D/E Series and BD play...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To get the serial console, use the following connections on your unit PCB.

Remember that you need a TTL to RS232 adapter. See here : Ex-Link Cable for C/D/E Series and BD players


Serial console for BD-D8200, BD-D8500, BD-D8900

BD-D8X00.jpg


Serial console for BD-E8300, BD-E8500, BD-E8900, BD-E8909S

BD-E8X00.jpg


Guidelines for models that are not listed here

If your model is not listed here, you can try to locate the signals by yourself.

  • try to locate 'dead-end' resistors (one pad is not connected to anything)
  • the signals directly go to the ARM processor
  • the signals level is 3.3v when the console is idle
  • press INFO on the remote controller to generate traffic on the TX signal
  • using an oscilloscope will ease this task
Retrieved from "http://wiki.samygo.tv/index.php?title=Serial_console&oldid=2937"