The Service Menu (ES-series)
Contents
Standard Service Menu
Introduction
Information regarding the standard service menu on the ES series TVs that can be accessed without using an IR blaster. By pressing [MUTE] [1] [8] [2] on North American models and [INFO] [MENU] [MUTE] [POWER] on European models. The values in ( ) next to the options below are the default values from an ES6500. !!!WARNING!!! Your TV can still be unrecoverably bricked very easily by changing settings !!!WARNING!!!
Standard Service Menu
Introduction
Information regarding the standard service menu on the ES series TVs that can be accessed without using an IR blaster. By pressing [MUTE] [1] [8] [2] on North American models and [INFO] [MENU] [MUTE] [POWER] on European models. The values in ( ) next to the options below are the default values from an ES6500. !!!WARNING!!! Your TV can still be unrecoverably bricked very easily by changing settings !!!WARNING!!!
Menu Structure
WIP
- Option
- Factory Reset
- Type (46A1AF0E)
- Local Set (US) (Greyed Out)
- Basic Model (UE6500) (Greyed Out)
- SVC Model (6500) (Greyed Out)
- Tuner (SI_ATC2)
- Front Color (U-T-CL-M65)
- Control
- EDID
- EDID ON/OFF (OFF)
- EDID WRITE ALL (...) (Greyed Out)
- EDID WRITE PC (...) (Greyed Out)
- EDID WRITE HDMI (...) (Greyed Out)
- EDID WRITE HDMI1 (...) (Greyed Out)
- EDID WRITE HDMI2 (...) (Greyed Out)
- EDID WRITE HDMI3 (...) (Greyed Out)
- EDID WRITE HDMI4 (...) (Greyed Out)
- EDID VER (...) (Greyed Out)
- EDID PORT (...) (Greyed Out)
- EDID WRITE DVI (...) (Greyed Out)
- Sub Option
- RF Mute Time (600ms)
- RS-232 Jack (UART)
- Watchdog (ON)
- WD Count (0)
- Lvds Format (JEIDA)
- View Log
- H.264 Margin (8)
- MPEG Margin (1000)
- Region (USA) (Greyed Out)
- PC Auto Ident (Enable)
- OTP Lock (Failure)
- Auto Power (MEMORY)
- KEY SENSITIVITY (Not used)
- OTA Support (OFF)
- FKP Down
- WIFI REGION (S)
- e-Pop Default (ON)
- OPTION_SWU
- OPTION_MEDIAPLAY
- 3D OPTIMIZE VALUE (1)
- ECO IC TYPE (NLS1006)
- Energy Star Logo (ON)
- Fast USB Booting (OFF)
- Num of Network Stream (0)
- CI+1.3 (OFF)
- KR3D (OFF)
- PDP Option (Greyed Out)
- Hotel Option
- Hospitality Mode (OFF)
- Power On (...) (Greyed Out)
- Menu OSD (...) (Greyed Out)
- Operation (...) (Greyed Out)
- Music Mode (...) (Greyed Out)
- External Source (...) (Greyed Out)
- Eco Solution (...) (Greyed Out)
- Cloning (...) (Greyed Out)
- Shop Option
- Shop Mode (OFF)
- Exhibition Mode (OFF)
- 3D Cube (OFF)
- Sound
- High Devi (OFF)
- Carrier_Mute (ON)
- Speaker Delay Normal (80)
- Pilot Level High Thld (0x28h)
- Pilot Level Low Thld (0x10h)
- Speaker EQ (ON)
- Mic Scale(0)
- India Sound (OFF)
- SVC
- Test Pattern
- Panel Display Time (0Hr)
- Logic Usb D/L (...) (Greyed Out)
- Tuner Status
- T-CON Usb Download (Failure)
- T-CON CheckSum
- Tuner Margin (10)
- TS Clock delay (0)
- SUBMICOM UPGRADE (OFF) (WILL BRICK TV IF CHANGED)
- BT ADDRESS (0000)
- BT UPGRADE
- BT FREEPAIRING (ON)
- SVC Reset
- TCON_TEMP READ (0.00)
- TEMP LAST (60.00)
- DCC VERSION (0x0) (ON)
- DCC CHK SEL (0)
- DCC CHECK LOCAL (0x0)
- DCC CHECK TOTAL
- Function Upgrade (Off)
- Smart Hub Reset (Off)
- WIFI ER COUNT (0)
- BT ER COUNT (5)
- Debug Log Down (Ready)
- MulitACC Checksum (0x3e96)
- SVC Info
- TS Clock delay TC (0)
- TS Clock delay S (0)
- CAL Data Backup (...) (Greyed Out)
- CAL Data Restore
- Echo-FP UPGRADE (Off)
- Chip TEST (Failure)
- R_CTR_DYN_ON_7k (OFF)
- R_CTR_MOV_ON_7k (OFF)
- CSB (OFF)
- CLB (OFF)
- Expert
- N/D ADJ (OFF)
- Source (...) (Greyed Out)
- ADC/WB !!!!!WIP!!!!!
- 1st_Y_GH (0)
- 1st_Y_GL (...) (Greyed Out)
- 1st_Cb_BH (0)
- 1st_Cb_BL (0)
- 1st_Cr_RH (0)
- 1st_Cr_RL (0)
- 2nd_R_L (134)
- 2nd_G_L (134)
- Advanced (Press 0000 to view the options listed below)
- Picture_2D (Greyed Out)
- Picture_3D (Greyed Out)
