Boot from USB using u-boot
Revision as of 09:54, 16 March 2010 by Aquadran (talk | contribs) (moved SamyGO Boot From USB to Boot From USB)
Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only support
Requirements:
- Serial connection by enable serial debug console
- Get access to bootloader, refer to instructions here Access to Bootloader
- Usb disk drive or pen drive (at least 256MB)
- TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive
