Difference between revisions of "BEFORE YOU START: Safety measures for D series TVs"
m (Created page with "* In service menu, '''enable Debug mode''' for the RS232 port: :: With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]''' :: Enter th...") |
(No difference)
|
Revision as of 10:41, 10 February 2012
- In service menu, enable Debug mode for the RS232 port:
- With TV switched off, press the following sequence on the remote: [INFO] [MENU] [MUTE] [POWER]
- Enter the Control menu and set the value of the RS232 mode to Debug.
- Once you're back to the main Service menu, you will have to power off the TV for normal operation.
- Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
- Have a working Ex-Link Cable for C/D Series at hand.
- If you don't feel capable of soldering such a cable, you can find and buy a cheap (under $5) USB to TTL adapter at eBay.
