Difference between revisions of "BEFORE YOU START: Safety measures for D series TVs"
m |
m |
||
| Line 1: | Line 1: | ||
* In service menu, '''enable Debug mode''' for the RS232 port: | * In service menu, '''enable Debug mode''' for the RS232 port: | ||
| − | :: With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]''' | + | :: With TV switched off, press the following sequence on the remote:<br> |
| + | :::*UE,LE models:'''[INFO] [MENU] [MUTE] [POWER]'''<br> | ||
| + | :::*UN,UA models:'''[MUTE] 1 8 2 [POWER]'''<br> | ||
:: Enter the '''Control''' menu and set the value of the '''RS232 mode''' to '''Debug'''. | :: Enter the '''Control''' menu and set the value of the '''RS232 mode''' to '''Debug'''. | ||
:: Once you're back to the main Service menu, you will have to power off the TV for normal operation. | :: Once you're back to the main Service menu, you will have to power off the TV for normal operation. | ||
Latest revision as of 16:11, 22 February 2012
- In service menu, enable Debug mode for the RS232 port:
- With TV switched off, press the following sequence on the remote:
- UE,LE models:[INFO] [MENU] [MUTE] [POWER]
- UN,UA models:[MUTE] 1 8 2 [POWER]
- UE,LE models:[INFO] [MENU] [MUTE] [POWER]
- Enter the Control menu and set the value of the RS232 mode to Debug.
- Once you're back to the main Service menu, you will have to power off the TV for normal operation.
- Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
- With TV switched off, press the following sequence on the remote:
- Have a working Ex-Link Cable for C/D Series at hand (May help if TV bricks).
- If you don't feel capable of soldering such a cable, you can find and buy a cheap (under $5) USB to TTL adapter at eBay.
