Difference between revisions of "Boot from USB using u-boot"


From SamyGO
Jump to: navigation, search
m (moved Boot From USB to Boot from USB on non CI+ Devices: Boot From USB on non CI+ Devices)
(No difference)

Revision as of 09:58, 16 March 2010

Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only support

Requirements:

  • Serial connection by enable serial debug console
  • Get access to bootloader, refer to instructions here Access to Bootloader
  • Usb disk drive or pen drive (at least 256MB)
  • TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive