Difference between revisions of "Boot from USB using u-boot"

Revision as of 09:54, 16 March 2010

Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only support

Requirements:

Serial connection by enable serial debug console
Get access to bootloader, refer to instructions here Access to Bootloader
Usb disk drive or pen drive (at least 256MB)
TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive

Revision as of 09:52, 16 March 2010 (view source) Aquadran (talk \| contribs) ← Older edit	Revision as of 09:54, 16 March 2010 (view source) Aquadran (talk \| contribs) m (moved SamyGO Boot From USB to Boot From USB) Newer edit →
(No difference)