Boot from USB using u-boot


From SamyGO
Revision as of 10:00, 16 March 2010 by Aquadran (talk | contribs)
Jump to: navigation, search

Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only supported devices

Requirements:

  • Serial connection by enable serial debug console
  • Get access to bootloader, refer to instructions here Access to Bootloader
  • Usb disk drive or pen drive (at least 256MB)
  • TFTP Daemon on some host to optionaly load kernel over network or in case usage pen drive


Instruction is in progress.

Retrieved from "http://wiki.samygo.tv/index.php?title=Boot_from_USB_using_u-boot&oldid=469"