Difference between revisions of "Patched firmware"


From SamyGO
Jump to: navigation, search
(File:Cinavia_logo.gif)
m (Enter this IP:250px|thumb|left|)
 
(44 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
'''Precheck:'''<br>
 
'''Precheck:'''<br>
 
{{red|If you never touched OTN in service menu '''there is no reason to change anything now.''' You can skip this step!!!!!}}<br>
 
{{red|If you never touched OTN in service menu '''there is no reason to change anything now.''' You can skip this step!!!!!}}<br>
*Access [[Service_Menu#Accessing_the_menu| Service menu]]
+
*Access '''[[Service_Menu#Accessing_the_menu| Service menu]]'''
 
*Enter the '''Control'''-'''SubOption''' menu and set the values:
 
*Enter the '''Control'''-'''SubOption''' menu and set the values:
 
::*OTN to '''enabled'''.
 
::*OTN to '''enabled'''.
 
::*OTN type '''operating'''
 
::*OTN type '''operating'''
'''{{red|Caution!}}''' RC Keys '''Up'''&'''Down''' arrows make selections, while '''Right'''&'''Left''' arrows {{red|make changes}}. You needed to backup previous value before changing any option. Some options cannot be reverted once changed. The service menu has a protected 'advanced' submenu. Press the '''0''' button four times on advanced to enter the hidden menu. Before touching any setting, please note the original value. The menu settings are listed (with their default values?) in the [[Service Manuals]].<br><br>
+
'''{{red|Caution!}}''' RC Keys '''Up'''&'''Down''' arrows make selections, while '''Right'''&'''Left''' arrows {{red|make changes}}. You needed to backup previous value before changing any option. Some options cannot be reverted once changed. The service menu has a protected 'advanced' submenu. Press the '''0''' button four times on advanced to enter the hidden menu. Before touching any setting, please note the original value. The menu settings are listed (with their default values?) in the '''[[Service Manuals]]'''.<br><br>
 
'''Installing firmware'''
 
'''Installing firmware'''
 
*Set dns (depends on you network setup on tv or/and on your router) to:  
 
*Set dns (depends on you network setup on tv or/and on your router) to:  
[[File:Develop_ip.png]]
+
[[File:Server_ip.png]]
 
*Switch tv off and on again
 
*Switch tv off and on again
 
*Check from tv's menu for firmware update via internet
 
*Check from tv's menu for firmware update via internet
Line 19: Line 19:
 
*If you get an error at ~90% of install process turn tv off for ~3min and try again
 
*If you get an error at ~90% of install process turn tv off for ~3min and try again
 
*If no firmware are shown -> report it (not to Samsung but here in SUPPORT forum)
 
*If no firmware are shown -> report it (not to Samsung but here in SUPPORT forum)
*'''Set your dns back to normal operational''' (if you don't do this your device will be banned after 2 days on server due senseless filling up of logfiles)
+
*'''Set your dns back to normal operational''' (if you don't do this your device will be banned after 2 days on server due senseless filling up of log files)
 
*Turn tv off and on again
 
*Turn tv off and on again
 
*Don't forget to disable further firmware updates!!! ('''Samsung won't make any technical improvements in new firmwares''')
 
*Don't forget to disable further firmware updates!!! ('''Samsung won't make any technical improvements in new firmwares''')
Line 29: Line 29:
 
1. ''Original firmware:'' T-VAL6DEUC-1016.0<br>
 
1. ''Original firmware:'' T-VAL6DEUC-1016.0<br>
 
2. ''Features:''<br>
 
2. ''Features:''<br>
* Execute own script during TV boot:{{small| (from root of fat32 formatted usb.)}}
+
* Executing own script during TV boot:{{small| (from root of fat32 formatted usb.)}}
 
  /SamyGO/rcSGO
 
  /SamyGO/rcSGO
* Full unrestricted shell trough [[Ex-Link_Cable_for_C/D/E_Series_and_BD_players | Exlink]] {{small|(Symbol filtration at kernel level removed)}}
+
* Full unrestricted shell trough '''[[Ex-Link_Cable_for_C/D/E_Series_and_BD_players | Exlink]]''' {{small|(Symbol filtration at kernel level removed)}}
 
* Custom autostart - {{red |for advanced users only!}}. Ask on forum!<br>
 
* Custom autostart - {{red |for advanced users only!}}. Ask on forum!<br>
 
3. ''Installation:'' <br>
 
3. ''Installation:'' <br>
Use [[Patched_firmware#SamyGO_DNS_service|SamyGO DNS service]] to get patched firmware installed.<br>
+
Use '''[[Patched_firmware#SamyGO_DNS_service|DNS trick]]''' to get patched firmware installed.<br>
 
4. ''How to use:'' <br>
 
4. ''How to use:'' <br>
 
To have SamyGO running on TV, You should download, extract (and overwrite existing files):
 
To have SamyGO running on TV, You should download, extract (and overwrite existing files):
Line 41: Line 41:
 
  3. SamyGO-libs-T-VALDEUC-20110123101934
 
  3. SamyGO-libs-T-VALDEUC-20110123101934
 
  4. SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip
 
  4. SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip
Required files are to be downloaded from [http://download.samygo.tv/C%20Series/For%20ARM%20CPUs/ download area]
+
Required files are to be downloaded from '''[http://download.samygo.tv/C%20Series/For%20ARM%20CPUs/ download area]'''
 
== T-VALAUSC ==
 
== T-VALAUSC ==
 
''Original firmware:'' T-VALAUSC-1035.0<br>
 
''Original firmware:'' T-VALAUSC-1035.0<br>
''Features'', ''installation'' and ''usage'': same as [[Patched_firmware#T-VAL6DEUC | T-VAL6DEUC]], except you don`t need modules from VAL6DEUC (p.4)
+
''Features'', ''installation'' and ''usage'': same as '''[[Patched_firmware#T-VAL6DEUC | T-VAL6DEUC]]''', except you don`t need modules from VAL6DEUC (p.4)
  
 
= '''D series TV`s''' =
 
= '''D series TV`s''' =
To be updated
+
On SamyGO-Patched Firmware the '''[[SamyGO Extensions Pack]]''' are auto-started during boot (see following list)
 +
==T-GAP8AKUC_001118 (real version: 1018.4)==
 +
*USB-Hotplug: execute script run.sh from usb on insertion
 +
*Starts '''/mtd_rwarea/user.sh''' if exists (instead of exeDSP start from rc.local)
 +
*Unlimited shell trough ExLink unlocked
 +
*PVR to fat32 formatted USB
 +
 
 
= '''E series TV`s''' =
 
= '''E series TV`s''' =
== T-MST10DEUC ==
+
==T-MST10DEUC 1030.0==
T-MST10DEUC-1030.0<br>
+
*'''[[SamyGO Extensions Pack]]''' is included ('''/usr/SamyGO/SamyGO''') and auto-started on boot
To be updated
+
 
== T-ECPDEUC ==
+
==T-ECPDEUC 2003.4==
T-ECPDEUC-2003.4<br>
+
*SamyGO HD-Logo
To be updated
+
*'''[[SamyGO Extensions Pack]]''' is included ('''/usr/SamyGO/SamyGO''') and auto-started on boot
 +
 
 
= '''BluRay players''' =
 
= '''BluRay players''' =
== B-FIRHTBEUC ==
+
=== Installing '''[[SamyGO Extensions Pack]]''' ===
B-FIRHTBEUC-1016.3<br>
+
====Go to Settings (blue or (D))-> Development -> '''Setting Server IP'''====
To be updated
+
====Enter this IP:<br>[[Image:Server_ip.png|250px|thumb|left| ]]====
= '''exeDSP Patches''' =  
 
== [[File:Cinavia_logo.gif]] ==
 
A Digital Rights Management (DRM) system utilizing audio watermaking technology created by verance that can detect when an illegal
 
movie download / pirate DVD is being played on a PlayStation 3 (PS3) console and modern Blu-ray stand-alone players on  the market.
 
Content protected by this technology carry inaudible codes (the watermark) embedded in the audio tracks by the owner of the copy-
 
right that indicate how and where they are to be used.
 
{{small | When such a movie is played back on a player with Cinavia detection the players firmware will detect the watermark and check if the device has been authorized for the watermark. If there isn't authorization for the device a message will be displayed saying that the content is protected by Cinavia and not authorized for playback on the device.
 
Cinavia DRM has been added to all new BD players beginning the first quarter, 2010.[http://www.afterdawn.com/glossary/term.cfm/cinavia]}}
 
 
 
{{red |'''This patch will let you playback your *LEGIT* movie copies, without Cinavia interrupting, and is provided for educational purposes only.<br/>We're not at all responsible if your TV/BD explodes!'''}}
 
<br>
 
[[File:B-FIRHTBEUC_1016.3_exedsp_cynavia_free.png]]
 
  
© '''[http://forum.samygo.tv/memberlist.php?mode=viewprofile&u=19316 theos0o]'''
+
====Press '''User Application Synchronization'''====
----
+
Wait until TV installs widget (SamyGO Extensions)...
<font size="3">'''Patching exeDSP'''</font size>
+
Could take a while, depends from your internet speed. Wait until TV says "done"
 +
NB! All other your widgets, installed from local server before were deleted!
 +
====Exit developer menu, exit SmartHub.====
 +
===On SamyGO-Patched Firmware the [[SamyGO Extensions Pack]] are auto-started during boot (see following list) ===
 +
====B-FIRHRDEUC_001107 (real version: 1007.0)====
 +
*USB-Hotplug: execute script run.sh from usb on insertion
  
1. Root your device using [[Patched_firmware#SamyGO_DNS_service | DNS trick]]<br>
+
====B-FIRHTBEUC_001112 (real version: 1012.2)====
2. Download firmware from Samsung support page<br>
+
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
3. Decrypt firmware with [http://sourceforge.net/p/samygo/code/1244/tree/patcher/trunk SamyGO Firmware patcher] (example):
+
*Starts '''/mtd_rwarea/myBoot.sh''' if present instead of exeDSP start-script (original Samsung "Hack")
SamyGO.py decrypt_all ./B-FIRHRTBEUC
 
4. Extract exeDSP binary from decrypted exe.img. Here are different ways to do that, you can mount exe.img as squashfs image file or open it in 7zip<br>
 
5. Open exeDSP in HEX editor and search for hex string:
 
10 80 BD E8 08 40 2D E9 04 00 50 E3 00 {{red|'''F1 9F 97'''}}
 
Replace last three bytes ('''F1 9F 97''') to '''00 A0 E1'''. Result must look like:
 
10 80 BD E8 08 40 2D E9 04 00 50 E3 00 {{red|'''00 A0 E1'''}}
 
6. Save patched exeDSP<br><br>
 
  
<font size="3">'''Installing patched exeDSP'''</font size><br>
+
====B-FIRHTBEUC_001116 (real version: 1016.3)====
1. Make sure you have FTP and shell (netcat) access<br>
+
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
2. Copy your patched exeDSP into '''/mtd_rwarea''' folder<br>
+
*Starts '''/mtd_rwarea/myBoot.sh''' if present insead of exeDSP start-script (origial Samsung "Hack")
3. Connect through netcat and apply proper permissions to it, for example:
+
*Starts '''/mtd_rwarea/user.sh''' if present insead of exeDSP start-script
chmod 755 /mtd_rwarea/exeDSP
 
4. Connect through FTP and copy '''/mtd_exe/rc.local''' to your PC<br>
 
5. Rename it (on your PC) to '''user.sh'''<br>
 
6. Open it for editing (on your PC of course!), using your favorite editor, eg. Notepad++<br>
 
7. Find the line where original exeDSP is started, example:
 
cd /mtd_exe
 
sysctl -w kernel.msgmni=64
 
./exeDSP
 
8. Add '''BEFORE''' these lines the following line:
 
mount -o bind /mtd_rwarea/exeDSP /mtd_exe/exeDSP
 
So it should be like this:
 
{{red|'''mount -o bind /mtd_rwarea/exeDSP /mtd_exe/exeDSP'''}}
 
cd /mtd_exe
 
sysctl -w kernel.msgmni=64
 
./exeDSP
 
9. {{red|'''If you want to be 100% safe, add the following line:'''}}
 
mv /mtd_rwarea/user.sh /mtd_rwarea/user.sh.safe
 
{{red|'''before the previous block, example:'''}}
 
if [ -e /mtd_rocommon/watermark_set ]; then
 
echo "watermark_set flag exists"
 
fi
 
 
echo "B-FIRHTBEUC" > /dtv/info
 
echo 7 4 1 7 > /proc/sys/kernel/printk
 
 
{{red|'''mv /mtd_rwarea/user.sh /mtd_rwarea/user.sh.safe'''}}
 
 
if [ -e /mtd_rwarea/myBoot.sh ]; then
 
/mtd_rwarea/myBoot.sh
 
else
 
{{red|'''mount -o bind /mtd_rwarea/exeDSP /mtd_exe/exeDSP'''}}
 
cd /mtd_exe
 
sysctl -w kernel.msgmni=64
 
./exeDSP
 
fi
 
This will make the script execute only once, so if it doesn't work and the device doesn't boot, a reboot will fix the problems!<br>
 
After you ensure it works good, you should remove that line, and name the file user.sh on the device, so that it always executes and loads your patched exeDSP.<br><br>
 
10. Copy your script into '''/mtd_rwarea'''<br>
 
11. Apply proper permissions to it, example:
 
chmod +x /mtd_rwarea/user.sh
 
12. Reboot your device and pray :)
 
  
 +
====B-FIRURDEUC_001103 (real version: 1003.2)====
 +
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
  
Patch tested and works well on B-FIRHTBEUC_1016.3. Patch expected to work on all FIR* based devices. Checked on IDA, but not tested on devices yet:
+
====B-FIRBP7WWC_001671 (real version: 1004.x)====
B-FIRBPEWWC 1053.2
+
*USB-Hotplug: execute script '''run.sh''' from usb on insertion
B-FIRHRDEUC-1012.3
+
*Starts '''/mtd_rwarea/user.sh''' if present insead of exeDSP start-script
B-FIRURDEUC 1012.0
 
B-FIRBP7WWC 1010.0
 
B-FIRHTSWWC 1012.5
 
B-FIRHT7WWC 1012.5
 
  
----
+
= '''[[ExeDSP_modifications | exeDSP Patches]]''' =
 +
Please read '''[[ExeDSP_modifications | more...]]'''
  
 
=References=
 
=References=
 
Related samygo.tv forum topics:<br>
 
Related samygo.tv forum topics:<br>
 
#[B series]<br>
 
#[B series]<br>
#[http://forum.samygo.tv/viewtopic.php?f=10&t=2255 C series]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=10&t=2255 C series]'''<br>
#[http://forum.samygo.tv/viewtopic.php?f=22&t=4199 D series]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=22&t=4199 D series]'''<br>
#[http://forum.samygo.tv/viewtopic.php?f=50&t=4313 E series]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=50&t=4313 E series]'''<br>
#[http://forum.samygo.tv/viewtopic.php?f=18&t=4244 BluRay players]<br>
+
#'''[http://forum.samygo.tv/viewtopic.php?f=18&t=4244 BluRay players]'''<br>

Latest revision as of 12:40, 25 June 2015

Work in progress!

SamyGO DNS service

Is used only for Firmware downgrade and Patched firmware installation on C/D/E series for supported models only. You further acknowledge and agree that we are not responsible or liable, directly nor indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, site or resource.

Precheck:
If you never touched OTN in service menu there is no reason to change anything now. You can skip this step!!!!!

  • Access Service menu
  • Enter the Control-SubOption menu and set the values:
  • OTN to enabled.
  • OTN type operating

Caution! RC Keys Up&Down arrows make selections, while Right&Left arrows make changes. You needed to backup previous value before changing any option. Some options cannot be reverted once changed. The service menu has a protected 'advanced' submenu. Press the 0 button four times on advanced to enter the hidden menu. Before touching any setting, please note the original value. The menu settings are listed (with their default values?) in the Service Manuals.

Installing firmware

  • Set dns (depends on you network setup on tv or/and on your router) to:

Server ip.png

  • Switch tv off and on again
  • Check from tv's menu for firmware update via internet
  • Install firmware if it detects one

Notes:

  • If you get an error at ~90% of install process turn tv off for ~3min and try again
  • If no firmware are shown -> report it (not to Samsung but here in SUPPORT forum)
  • Set your dns back to normal operational (if you don't do this your device will be banned after 2 days on server due senseless filling up of log files)
  • Turn tv off and on again
  • Don't forget to disable further firmware updates!!! (Samsung won't make any technical improvements in new firmwares)

B series TV`s

To be updated

C series TV`s

T-VAL6DEUC

1. Original firmware: T-VAL6DEUC-1016.0
2. Features:

  • Executing own script during TV boot: (from root of fat32 formatted usb.)
/SamyGO/rcSGO
  • Full unrestricted shell trough Exlink (Symbol filtration at kernel level removed)
  • Custom autostart - for advanced users only!. Ask on forum!

3. Installation:
Use DNS trick to get patched firmware installed.
4. How to use:
To have SamyGO running on TV, You should download, extract (and overwrite existing files):

1. SamyGO-All-Extensions-v0.03.6-r12-for-T-VALDEUC-20110103184650
2. SamyGO-All-Extensions-Bugfix-v0.03.6-r15-for-valencia-20111001120232
3. SamyGO-libs-T-VALDEUC-20110123101934
4. SamyGO-All-Modules-v0.03.7-r01-for-armv7a_valencia_DEV-T-VAL6DEUC-20110912071317.zip

Required files are to be downloaded from download area

T-VALAUSC

Original firmware: T-VALAUSC-1035.0
Features, installation and usage: same as T-VAL6DEUC, except you don`t need modules from VAL6DEUC (p.4)

D series TV`s

On SamyGO-Patched Firmware the SamyGO Extensions Pack are auto-started during boot (see following list)

T-GAP8AKUC_001118 (real version: 1018.4)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/user.sh if exists (instead of exeDSP start from rc.local)
  • Unlimited shell trough ExLink unlocked
  • PVR to fat32 formatted USB

E series TV`s

T-MST10DEUC 1030.0

T-ECPDEUC 2003.4

BluRay players

Installing SamyGO Extensions Pack

Go to Settings (blue or (D))-> Development -> Setting Server IP

Enter this IP:
Server ip.png

Press User Application Synchronization

Wait until TV installs widget (SamyGO Extensions)... Could take a while, depends from your internet speed. Wait until TV says "done" NB! All other your widgets, installed from local server before were deleted!

Exit developer menu, exit SmartHub.

On SamyGO-Patched Firmware the SamyGO Extensions Pack are auto-started during boot (see following list)

B-FIRHRDEUC_001107 (real version: 1007.0)

  • USB-Hotplug: execute script run.sh from usb on insertion

B-FIRHTBEUC_001112 (real version: 1012.2)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/myBoot.sh if present instead of exeDSP start-script (original Samsung "Hack")

B-FIRHTBEUC_001116 (real version: 1016.3)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/myBoot.sh if present insead of exeDSP start-script (origial Samsung "Hack")
  • Starts /mtd_rwarea/user.sh if present insead of exeDSP start-script

B-FIRURDEUC_001103 (real version: 1003.2)

  • USB-Hotplug: execute script run.sh from usb on insertion

B-FIRBP7WWC_001671 (real version: 1004.x)

  • USB-Hotplug: execute script run.sh from usb on insertion
  • Starts /mtd_rwarea/user.sh if present insead of exeDSP start-script

exeDSP Patches

Please read more...

References

Related samygo.tv forum topics:

  1. [B series]
  2. C series
  3. D series
  4. E series
  5. BluRay players