Difference between revisions of "Serial console"


From SamyGO
Jump to: navigation, search
Line 14: Line 14:
 
[[File:BD-E8X00.jpg|200px]]
 
[[File:BD-E8X00.jpg|200px]]
  
== Serial console for BD-DB-E6100 ==
+
== Serial console for BD-E6100 ==
  
 
[[File:2CN80mod.jpg|300px]]
 
[[File:2CN80mod.jpg|300px]]

Revision as of 03:28, 18 February 2013

To get the serial console, use the following connections on your unit PCB.

Remember that you need a TTL to RS232 adapter. See here : Ex-Link Cable for C/D/E Series and BD players

Serial console for BD-D6900...

D6900 serial00.jpg D6900 serial01.jpg

Serial console for BD-D8200, BD-D8500, BD-D8900

BD-D8X00.jpg

Serial console for BD-E8300, BD-E8500, BD-E8900, BD-E8909S

BD-E8X00.jpg

Serial console for BD-E6100

300px


Guidelines for models that are not listed here

If your model is not listed here, you can try to locate the signals by yourself.

  • try to locate 'dead-end' resistors (one pad is not connected to anything)
  • the signals directly go to the ARM processor
  • the signals level is 3.3v when the console is idle
  • press INFO on the remote controller to generate traffic on the TX signal
  • using an oscilloscope will ease this task