Then connect this common pin to pin 8 of Atari joystick (DB9 male connector - pin 8). All other keys can be connected in any order to the Atari joystic
...nt troubles. Do not connect other devices than Atari joystick to your DB-9 connector.
13 KB (2,027 words) - 12:06, 31 August 2011
On most C-Series devices, the Ex-Link port is located on the VGA connector of the TV. While on the ES-series, there is a separate 3.5mm jack labelled
Cut the data cable about 60mm from the Nokia connector end, strip away approx 20mm of the outer sheath, and remove approx 3mm of i
12 KB (1,986 words) - 22:24, 27 April 2013
...serial port, with a 3.5mm stereo jack as a connector port that is called "connector for service only" in your television manual. To use this port, you will nee
50 KB (8,749 words) - 15:07, 18 December 2012
...m jack, like the audio ones, and on the other side an RS232 ( Serial ) DB9 connector. This cable will allow you to connect your PC computer to the TV, and enter
Finally connect the RS232 DB9 connector, to the RS232 - USB adapter, and the USB adapter plugged in your USB port o
18 KB (3,307 words) - 10:29, 6 January 2013
...wires on two male connectors, or directly plug wires into the FTDI female connector as shown below.
All you need is DB15Female connector and 3.5mm jack. On the DB15Female connector you will use:
4 KB (646 words) - 15:43, 8 December 2012
...ls. They are controlled by P_DIM1, ..., P_DIM4 lines of the 20-wire cable. Connector pinout:
...small-pitch flat-blade screwdriver to accurately remove the pins from the connector housing. Connect any of the four P_DIM signals coming from the mainboard to
14 KB (1,933 words) - 15:54, 10 November 2013
