Difference between revisions of "Hospitality mode hack for D6 arm models"
m (→How to install) |
m |
||
| Line 24: | Line 24: | ||
==How to install== | ==How to install== | ||
| + | 1. Install SamyGO using develop account according D series [[Rooting_D_series_arm_cpu_models | wiki article]].<br> | ||
[[File:Win32diskimage_howto.png |right]] | [[File:Win32diskimage_howto.png |right]] | ||
| − | + | 2. USB > 1GB space (Windows users can use FAT32 formatted USB)<br> | |
| − | + | 3. Download [[http://download.samygo.tv/D%20Series/For%20ARM%20CPUs/HospitalityHack/D6_Hospitality_v1.0.zip D6_Hospitality_v1.0.zip]]<br> | |
| − | + | 4. Make USB from extracted image (1Gb) using attached Win32DiskImager.exe, or under linux (e.g. if your USB is recognized as sda): | |
dd if=D6_HospitalityHack.img of=/dev/sda | dd if=D6_HospitalityHack.img of=/dev/sda | ||
| − | + | 5. Power off TV, attach USB<br> | |
| − | + | 6. Go to service menu (info-menu-mute-power) (or mute 1 8 2 power on UA models)<br> | |
| − | + | 7. Enable hospitality mode in service menu.<br> | |
| − | + | 8. Make "Clone USB to TV"<br> | |
| − | + | 9. Restart TV. If not bricked, congrats :)<br> | |
| − | + | 10. Go back to service menu and set Hospitality mode '''off'''<br> | |
| − | + | ||
==How to use== | ==How to use== | ||
Revision as of 14:46, 10 February 2012
D6 series SamsungTV only!
Contents
Warning!!!
NB. Method is not safe, tested on UA40D6000 and UE40D6750 only, needed to do more tests. Should work on other D series models too.
If bricked - no way back, just Service repair, not possible at home, sometimes if lucky, ExLink could be user for reviving...
SamyGO does not take any responsibility if TV bricks.
BEFORE TO START
- In service menu, enable Debug mode for the RS232 port:
- With TV switched off, press the following sequence on the remote: [INFO] [MENU] [MUTE] [POWER]
- Enter the Control menu and set the value of the RS232 mode to Debug.
- Once you're back to the main Service menu, you will have to power off the TV for normal operation.
- Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).
- Have a working Ex-Link Cable for C/D Series at hand (May help if TV bricks)
- If you don't feel capable of soldering such a cable, you can find and buy a cheap (under $5) USB to TTL adapter at eBay.
Supported firmwares
T-GAS*
T-GAS6*
What hack does?
Imports right start.sh to /mtd_rwarea and allows to use SamyGO on latest firmwares.
Also enables SamyGO Extensions start with TV start (no ticker needed).
How to install
1. Install SamyGO using develop account according D series wiki article.
2. USB > 1GB space (Windows users can use FAT32 formatted USB)
3. Download [D6_Hospitality_v1.0.zip]
4. Make USB from extracted image (1Gb) using attached Win32DiskImager.exe, or under linux (e.g. if your USB is recognized as sda):
dd if=D6_HospitalityHack.img of=/dev/sda
5. Power off TV, attach USB
6. Go to service menu (info-menu-mute-power) (or mute 1 8 2 power on UA models)
7. Enable hospitality mode in service menu.
8. Make "Clone USB to TV"
9. Restart TV. If not bricked, congrats :)
10. Go back to service menu and set Hospitality mode off
How to use
Now after you restart TV, you get SamyGO Extensions executed. Limitation - no patches like BigYellow fonts,
CHannelInfo and other available this way.
Check wiki article for setup and ussage of SamyGO Extensions.
Discussion
1. Topic on the samygo.tv.
--Juzis28 09:53, 10 February 2012 (UTC)
