Difference between revisions of "Main Page"


From SamyGO
Jump to: navigation, search
m (SamyGO DIY Hardwares)
m
Line 71: Line 71:
 
== SamyGO DIY Hardwares ==
 
== SamyGO DIY Hardwares ==
 
*[[SamyGO Brightness Sensor]]
 
*[[SamyGO Brightness Sensor]]
*[[Remote Control emulator: send custom IR codes]] (e.g. Factory + 3SPEED)
+
*[[Remote_Control_emulator:_send_custom_IR_codes#Build_your_own_IR_transmitter | build the dual led IR transmitter]] (e.g. Factory + 3SPEED)
 
*[[Enable Serial Console on non CI+ Devices |Ex-Link Cable for B-Series]]
 
*[[Enable Serial Console on non CI+ Devices |Ex-Link Cable for B-Series]]
 
*[[Ex-Link Cable for C/D/E Series and BD players]]
 
*[[Ex-Link Cable for C/D/E Series and BD players]]

Revision as of 09:59, 11 July 2012

Welcome to SamyGO Wiki

Logo.png

WARNING: DO NOT UPDATE THE SAMSUNG LATEST FIRMWARE UPGRADES
or YOU CAN NOT USE OUR HACKS AND CAN NOT REVERT FIRMWARE BACK EASILY!



SourceForge doesn't allow users to write on wiki. We needed to assign writing permission by hand.


We are on our new host from now. Unfortunately you needed to replace your password.


Place note for editing permissions by hand on request from forum (Erdem_ua or juuso). Write short: why do you want edit wiki.

Compatibility Overview

See the Compatibility page to see which TV models should work.


Safety Measures (which you shouldn't start without)

  1. Have a working Ex-Link cable at hand.
  2. Ensure the backup exe.img ( stored on /dev/tbml10 ) is in good condition ( and ideally not altered ).
  3. Ensure your RS232 Setting in the Service-Menu is set to "debug" and that the Watchdog option in the service-menu is turned off (Control -> SubOption).
  4. Know that your TV will reset RS232 jack back to UART mode after new firmware installation or reverting back to old version.


Useful WIKI articles

Do you want to hack your TV?


General Information


SamyGO DIY Hardwares


Interesting Reference Material

The file-system used in the the recent Samsung TVs is "RFS". Its proprietary nature and consequently so the absence of an according Linux RFS-Module in the standard Linux distributions makes it currently impossible to modify files by simply mounting the respective image as "RW", modifying it and saving the respective image again. This is the reason why currently all changes are done via patching of the image-binaries. But the hope never dies.

All the source code Samsung is legally obliged to post can be found here.

Should be able to find useful info somewhere.


Disclaimer

Neither this WIKI/Forum nor the author(s) of articles and information provided accept any responsibility for damage that may be caused by use of the information provided. You do everything at your own risk. Be aware that "hacking" activities may void your warranty!

Crew List
&
Rest In Peace