Difference between revisions of "SamyGO OpenEmbedded"

Revision as of 07:48, 23 May 2010

You can easily setup cross compile toolchain or/and create rootfs package for external boot.

Note: This instruction refer to SVN SamyGO trunk repository which supports only TV with firmwares listed below!

T-CHE6AUSC, T-CHE7AUSC, T-CHEAUSC, T-CHL5DAUC, T-CHL5DEUC, T-CHL7DAUC, T-CHL7DEUC, T-CHU7DAUC, T-CHU7DEUC

Supported host systems are: Linux Debian 5.0 and Ubuntu 10.4 (both 32/64 bits versions), Mac OS X 10.5.6 (using Fink)

Host systems need some preparations:

Ubuntu only:

You need to reconfigure sh to use bash using below command and select No when it asks you to install dash as /bin/sh.

sudo dpkg-reconfigure dash

Pull trunk svn repository from:

svn co http://samygo.svn.sourceforge.net/svnroot/samygo samygo

after pull, you can enter samygo directory:

cd samygo/oe/trunk

then do:

. setup.sh

Script setup will generate two files: build-samygo/conf/local.conf and build-samygo/env.source .

Now you are in build-samygo directory.

If you like build only a toolchain use this command:

bitbake task-samsung-toolchain

If you like build rootfs image for tv with firmware T-CHL7DEUC use this command:

bitbake externalboot-T-CHL7DEUC

After building all tools, results are at build-samygo/tmp/deploy/images directory.

@@ Line 9: / Line 9: @@
 Host systems need some preparations:
-'''Ubuntu:'''
+'''Ubuntu only:'''
 You need to reconfigure sh to use bash using below command and select No when it asks you to install dash as /bin/sh.
   sudo dpkg-reconfigure dash
+----
 Pull trunk svn repository from:
@@ Line 38: / Line 41: @@
   bitbake externalboot-T-CHL7DEUC
-Bitbake could complain about not installed packages like "help2man", "diffstat", "texinfo". You needed to install them also.
 After building all tools, results are at ''build-samygo/tmp/deploy/images'' directory.