Formatting /mtd rwarea/

• Make Ex-Link Cable for C-Series attach to TV.
• Power off TV.
• Unplug Network cable, might antenna too. Leave only ExLink and Power cable plugged.
• Power on TV.
• Open terminal and connect TV over ExLink.
• Enter commands following by Enter:

10041004 (Enables serial input)
81588 (Responds with Key Record Start)
20089999 (Brings up TOP Debug Menu)
2 (Platform Print Sharing)
0 (Start level)
0 (End level)
2 (Advanced Platform)
2 (DeviceManager Debug)
90 (DeviceManager MW Debug)
12 (DLNA, FLASH, ODD, HDD, MoIP Test)

• If you know the partition number of /mtd_rwarea on your TV, skip to the next step. Otherwise, choose:

02 (PRINT FLASH Device Info)

This will show you a list of mounted devices and partitions. Find the one whose mount path is /mtd_rwarea). You can find the mount path on the second line of each chunk of info for each device. The partition number you need is the partition key on the first line. Now proceed with the rest of the steps.

11 (FLASH, HDD Format Test)
10 (or another, /mtd_rwarea/ partition number (14)

On the last line you have to enter number of your /mtd_rwarea/. On C550 it is 10, but on other TV it can be other (e.g. 14)

Known partition numbers for /mtd_rwarea (add yours here)

• C550: Partition 10
• C6510: Partition 14