BEFORE YOU START: Safety measures for C series TVs

From SamyGO

Revision as of 12:21, 10 January 2011 by Mianfrar (talk | contribs) (Created page with '* In service menu, '''enable Debug mode''' for the RS232 port. :: With TV switched off, press the following sequence on the remote: '''[INFO] [MENU] [MUTE] [POWER]''' :: Enter thâ¦')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

In service menu, enable Debug mode for the RS232 port.

With TV switched off, press the following sequence on the remote: [INFO] [MENU] [MUTE] [POWER]

Enter the Control menu and set the value of the RS232 mode to Debug.

Notice that your TV will reset RS232 mode back to UART when you install another firmware (no matter if it's older or newer).

Have a working Ex-Link Cable for C-Series at hand.

If you don't feel capable to solder such a cable, you can find and buy a cheap (under $5) USB to TTL adapter at eBay.

Retrieved from "http://wiki.samygo.tv/index.php?title=BEFORE_YOU_START:_Safety_measures_for_C_series_TVs&oldid=1138"