Difference between revisions of "Boot from USB using u-boot"


From SamyGO
Jump to: navigation, search
Line 12: Line 12:
 
1) Build rootfs image using [http://wiki.samygo.tv/index.php?title=SamyGO_OpenEmbedded SamyGO OE Framework].
 
1) Build rootfs image using [http://wiki.samygo.tv/index.php?title=SamyGO_OpenEmbedded SamyGO OE Framework].
  
Builded rootfs image will be in '''build/tmp/deploy/images''' directory. It will be '''rootfs-sdp83-xxxxxxx.tar.gz''' file
+
Builded rootfs image is located in '''build/tmp/deploy/images''' directory. Filename looks like '''rootfs-sdp83-xxxxxxx.tar.gz'''.
  
 
2) Partition usb disk/pen drive.
 
2) Partition usb disk/pen drive.

Revision as of 06:09, 17 March 2010

Note: This instruction apply only to LExxB65x, LExxB75x, PSxxB65x TV series with CI only supported devices

Requirements:

  • Serial connection
  • Usb disk drive or pen drive (at least 256MB)
  • TFTP daemon outside TV on some host in case using pen drive or optionaly in case disk drive
  • Builded rootfs image

Follow steps:

1) Build rootfs image using SamyGO OE Framework.

Builded rootfs image is located in build/tmp/deploy/images directory. Filename looks like rootfs-sdp83-xxxxxxx.tar.gz.

2) Partition usb disk/pen drive.

3) Unpack rootfs image to linux partition on usb disk/pen drive.

4) Put kernel image to TFTP service directory.

5) Enable serial debug console.

6) Enter u-boot bootloader prompt shell.

7) Set variables and execute commands in u-boot shell to boot linux kernel.

Instruction is in progress!