Difference between revisions of "Hospitality mode hack for D6 arm models"


From SamyGO
Jump to: navigation, search
m
m (How to install)
Line 14: Line 14:
  
 
==How to install==
 
==How to install==
  1. Download [[http://download.samygo.tv/D%20Series/For%20ARM%20CPUs/HospitalityHack/D6_Hospitality_v1.0.zip D6_Hospitality_v1.0.zip]], make USB from extracted image (1Gb) using attached software or under linux (dd if=this.image of=/dev/sd*(yours usb letter)
+
  1. Download [[http://download.samygo.tv/D%20Series/For%20ARM%20CPUs/HospitalityHack/D6_Hospitality_v1.0.zip D6_Hospitality_v1.0.zip]]
  2. Power off TV, attach USB,  
+
2. Make USB from extracted image (1Gb) using attached software or under linux (dd if=this.image of=/dev/sd*(yours usb letter)
  3. Go to service menu (info-menu-mute-power)
+
  3. Power off TV, attach USB,  
  4. Enable hospitality mode in service menu.
+
  4. Go to service menu (info-menu-mute-power)
  5. Make "Clone USB to TV"
+
  5. Enable hospitality mode in service menu.
  6. Restart TV. If not bricked, congrats :)
+
  6. Make "Clone USB to TV"
  7. Go back to service menu and set Hospitality mode off
+
  7. Restart TV. If not bricked, congrats :)
  8. Install SamyGO using develop account according D series [[Rooting_D_series_arm_cpu_models | wiki article]].
+
  8. Go back to service menu and set Hospitality mode off
 +
  9. Install SamyGO using develop account according D series [[Rooting_D_series_arm_cpu_models | wiki article]].
  
 
==How to use==
 
==How to use==

Revision as of 09:44, 10 February 2012

D6 series SamsungTV only!

Warning!!!

NB. Method is not safe, tested on UA40D6000 and UE40D6750 only, needed to do more tests. Should work on other D series models too.
If bricked - no way back, just Service repair, not possible at home. SamyGO does not take any responsibility if TV bricks.

Supported firmwares

T-GAS*
T-GAS6*

What hack does?

Imports right start.sh to /mtd_rwarea and allows to use SamyGO on latest firmwares.
Also enables SamyGO Extensions start with TV start (no ticker needed).

How to install

1. Download [D6_Hospitality_v1.0.zip]
2. Make USB from extracted image (1Gb) using attached software or under linux (dd if=this.image of=/dev/sd*(yours usb letter)
3. Power off TV, attach USB, 
4. Go to service menu (info-menu-mute-power)
5. Enable hospitality mode in service menu.
6. Make "Clone USB to TV"
7. Restart TV. If not bricked, congrats :)
8. Go back to service menu and set Hospitality mode off
9. Install SamyGO using develop account according D series  wiki article.

How to use

Now after you restart TV, you get SamyGO Extensions executed. Limitation - no patches like BigYellow fonts, CHannelInfo and other available this way. Check wiki article for setup and ussage of SamyGO Extensions.

Disscussion

1. Topic on the samygo.tv.




--Juzis28 09:25, 10 February 2012 (UTC)