Difference between revisions of "Hospitality mode hack for D6 arm models"


From SamyGO
Jump to: navigation, search
m (Created page with "<big>D6 series SamsungTV only!</big> ==Warning!!!== <font color="red">'''NB. Method is not safe, tested on UA40D6000 and UE40D6750 only, needed to do more tests. Should work on ...")
(No difference)

Revision as of 09:06, 10 February 2012

D6 series SamsungTV only!

Warning!!!

NB. Method is not safe, tested on UA40D6000 and UE40D6750 only, needed to do more tests. Should work on other D series models too.
If bricked - no way back, just Service repair, not possible at home. SamyGO does not take any responsibility if TV bricks.

Supported firmwares

T-GAS*
T-GAS6*

What hack does?

Imports right start.sh to /mtd_rwarea and allows to use SamyGO on latest firmwares.
Also enables SamyGO Extensions start with TV start (no ticker needed).

How to install

1. Download [zipped file], make USB from extracted image (1Gb) using attached software or under linux (dd if=this.image of=/dev/sd*(yours usb letter)
2. Power off TV, attach USB, 
3. Go to service menu (info-menu-mute-power)
4. Enable hospitality mode in service menu.
5. Make "Clone USB to TV"
6. Restart TV. If not bricked, congrats :)
7. Go back to service menu and set Hospitality mode off
8. Install SamyGO using develop account according D series wiki article.

How to use

Now after you restart TV, you get SamyGO Extensions executed. Limitation - no patches like BigYellow fonts, CHannelInfo and other available this way.