Difference between revisions of "Main Page"


From SamyGO
Jump to: navigation, search
(Moved B entries to B series Wiki)
(Safety Measures ( which you shouldn't start without ): Added option to disable watchdog to prevent loop)
Line 18: Line 18:
 
#Have a working [[Enable Serial Console on non CI+ Devices|Ex-Link cable]] at hand.
 
#Have a working [[Enable Serial Console on non CI+ Devices|Ex-Link cable]] at hand.
 
#Ensure the backup exe.img ( stored on /dev/tbml10 ) is in good condition ( and ideally not altered. )
 
#Ensure the backup exe.img ( stored on /dev/tbml10 ) is in good condition ( and ideally not altered. )
#Ensure your RS232 Setting in the Service-Menu is set to "debug".
+
#Ensure your RS232 Setting in the Service-Menu is set to "debug" and that the Watchdog option in the service-menu is turned off(Control->SubOption).
 
#Know that your TV will reset RS232 jack back to UART mode after new firmware installation or reverting back to old version.
 
#Know that your TV will reset RS232 jack back to UART mode after new firmware installation or reverting back to old version.
 
<br>
 
<br>

Revision as of 17:28, 26 January 2011

Welcome to SamyGo WiKi

WARNING: DO NOT UPDATE THE SAMSUNG LATEST FIRMWARE UPGRADES or YOU CAN NOT USE OUR HACKS AND CAN NOT REVERT FIRMWARE BACK EASILY!

SourceForge doesn't allow users to write on wiki. We needed to assign writing permission by hand.

Place note for editing permissions by hand on request from forum (Erdem_ua or juuso).

Logo.png

Compatibility Overview

See the Compatibility page to see which TV models should work.

Safety Measures ( which you shouldn't start without )

  1. Have a working Ex-Link cable at hand.
  2. Ensure the backup exe.img ( stored on /dev/tbml10 ) is in good condition ( and ideally not altered. )
  3. Ensure your RS232 Setting in the Service-Menu is set to "debug" and that the Watchdog option in the service-menu is turned off(Control->SubOption).
  4. Know that your TV will reset RS232 jack back to UART mode after new firmware installation or reverting back to old version.


Useful WIKI articles

General Information


Interesting Reference Material

The file-system used in the the recent Samsung TVs is "RFS". Its proprietary nature and consequently so the absence of an according Linux RFS-Module in the standard Linux distributions makes it currently impossible to modify files by simply mounting the respective image as "RW", modifying it and saving the respective image again. This is the reason why currently all changes are done via patching of the image-binaries.

All the source code Samsung is legally obliged to post can be found here.

Should be able to find useful info somewhere.

Disclaimer

Neither this WIKI/Forum nor the author(s) of articles and information provided accept any responsibility for damage that may be caused by use of the information provided. You do everything at your own risk. Be aware that "hacking" activities may void your warranty!

Crew List