Search results
- with aaa.bbb.ccc.ddd your tv's IP-address. when prompted, log in as <root>7 KB (1,159 words) - 12:56, 10 October 2012
- with aaa.bbb.ccc.ddd your TV's IP-address. with ppp.qqq.rrr.sss the nfs server's IP address, /dtv/usb/sda1 is the place where USB drives are mounted (at least on my TV5 KB (609 words) - 10:36, 9 November 2011
- ...olume), rest of this string is constant. Host IP is, of course, our device address. Content-Length define payload data length (XML data). Rest of the headers17 KB (2,501 words) - 13:27, 21 January 2013
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x02a0, 0x0448, 0x0288]33 KB (4,977 words) - 07:54, 29 April 2013
- 6. ETHERNET ADDRESS = 10:11:12:13:14:15 base - print or set address offset8 KB (864 words) - 05:44, 29 May 2011
- where first IP is TV, second gateway is not important in this case, third is address of TFTP server.6 KB (942 words) - 06:49, 13 October 2014
- Enter IP address of TV (e.g. 192.168.1.100). IP address must be configured manually, not automaticaly!<br><br>15 KB (2,491 words) - 06:06, 29 November 2012
- SamyGO TV BTC Address: '''Please ask to admin via PM'''4 KB (614 words) - 23:25, 2 September 2023
- 5. Login to your TV using telnet (make sure you know your TV's IP address before).12 KB (2,058 words) - 11:44, 9 September 2011
- MAC address of the computer's network card should be introduced in a file '''''telnet.s35 KB (5,306 words) - 09:28, 30 May 2013
- * Make sure the '''IP address in widgetlist.xml''' is your computer's IP address * Type your computer's IP address as the server IP address7 KB (1,164 words) - 18:04, 27 July 2011
- * You now need to type in the following IP address: 188.126.44.135 ...n the screen are wrong). If you pressed RETURN you will need to set the IP address again.10 KB (1,858 words) - 20:15, 21 February 2011
- usb 1-1.1: new low speed USB device using trihidtv-ehci and address 55 KB (727 words) - 01:07, 29 May 2011
- * Edit "c:\widget\www\widgetlist.xml" to change IP address to address of your PC ...s", choose "Development" and enter your computers IP address as the server address3 KB (440 words) - 07:54, 20 January 2017
- Net: Using MAC Address 00:xx:xx:xx:xx:xx <span style="color:red">The address is valid ONLY for the U-Boot version shown above.</span> Running '''umicom.8 KB (1,254 words) - 11:05, 10 February 2013
- umicom.img is position independent code, so you can change address 84300000 to any suitable place in RAM. Then you have to start umicom by U-B Using MAC Address 00:xx:xx:xx:xx:xx5 KB (746 words) - 11:34, 10 February 2013
- {{#ev:youtube|00CrLLtp-SE| |right|Use "develop" as login name (NOT e-mail address!). Example video from: [http://movl.com/ movl].}} ...tor open the file widgetlist.xml and change the IP address on the local IP address of your computer. <br>4 KB (596 words) - 06:56, 22 September 2013
- *Run ruSamsungTVCommunicator. It should automaticly detect TV's IP address and try to connect.2 KB (387 words) - 08:09, 4 May 2012
- ...nd put address: '''''http://TV_IP:4044''''' (where ''TV_IP'' is your TV IP address in local network).6 KB (873 words) - 20:04, 11 April 2012
- and put your server IP address7 KB (1,150 words) - 14:46, 13 May 2012